Stephenj37826
Well-Known Member
I probably have a few somewhere... shoot me a pm
DIY with Quantum Boards
- Thread starter robincnn
- Start date
Rocket Soul
Well-Known Member
With a 48A driver he would be stock with 52V max, right? Dont the r-spec max out at 54v?
Frank Nitty
Well-Known Member
Will do...
daveybc
Well-Known Member
@Budzbuddha How do you like that reflective lining? It looks like you opted for that instead of tent wall. I was thinking about building a small space and wasn't sure what to line it with. White gloss paint, panda film, some of that what you have used.. or perhaps that insulation bubble type wrap with the reflective layer on the outside ( probabley not the best at reflective properties but rigit and insulating).
Any feedback on the reflective stuff? Does it tear easly? It seems it would move with fans or possibly create hot spots as others had mentioned.
Any feedback on the reflective stuff? Does it tear easly? It seems it would move with fans or possibly create hot spots as others had mentioned.
Budzbuddha
Well-Known Member
Its vivosun mylar ( got to redo it lol ) ... no hot spots . Seems to reflect and brighten much more than tent material liner. Im trying to use any stray photon i can .... lol. I even cut a large square of it for floor liner pan ... easy to see overhead light reflected when looking down thru plants - bouncing light to the undercarriage.
Got a large roll on amazon for about $30 ish.
2 sided sticky tape to hang and easy to remove.
You can pretty much do the same with panda white.
Budzbuddha
Well-Known Member
Armyofsprout
Well-Known Member
That's what I heard also. Plus if it's gonna be a fire hazard idk if I wanna risk that.
Frank Nitty
Well-Known Member
You put me on to it and the stuff is awesome!!! I also have a panda white tent!!! Gonna buy a few more of them and do my basement!!!
more of them and
Stephenj37826
Well-Known Member
Not at 150 watts each. Need to look at the chart on the website.
Attachments
Last edited:
Frank Nitty
Well-Known Member
That's it right there baybeee!!!
Rocket Soul
Well-Known Member
Ive not been able to find complete voltage data on the r-spec, it only says 54v/3A max.
Stephenj37826
Well-Known Member
Actually it my be slightly higher than V2. 2 reds are in series so the string length is actually a little longer. I'll have amit update the website. Add 1.5 volts to V2 numbers to be safe.
Frank Nitty
Well-Known Member
Can I use this for my lights???
Looks like it would be really good for some strips!!!
Looks like it would be really good for some strips!!!
Frank Nitty
Well-Known Member
Yes,no,maybe so??? I saw it and wheels started turning REAL FAST!!!
pop22
Well-Known Member
If its aluminum yes! Otherwise, would you want it hanging over your head??? I had a bigass Mars Hydro light at one time, damn thing was almost as big as my tent and weighed at least 20 pounds. Rope ratchet failed and it fell and flattened all my plants that were 3 weeks into flower...............
Frank Nitty
Well-Known Member
Had that happen to my AVT on my last grow so I know how you felt...
Frank Nitty
Well-Known Member
And yeah its aluminum!!!
daveybc
Well-Known Member
Angle aluminum is easy. If you can find 1/2 inch rigid enough it would work good. I have 3/4" angle and i notched out to about 1/2 inch so I could slide the boards into a structure as you see. I just rebuilt the 2 double fixtures to be triple as you see in pic 2. As doubles, I measured out the exact measurement as the factory elite 360. Now with 3 boards I widened the 2 on the outside ( luckley I left a little extra length on original design). I will be running 3 hlg 185h 54a drivers ( 2 96e's per driver parallel ). My wall plug ac meter showed 255-260 watts ( 2.1a ) per driver on 2 boards. I will adjust them to 240 watts per 2. I use one of those ac meters to adjust output with the IO pot. They always show alot of watts being pulled from drivers. My 240h c2100 shows like 285-290 watts per 2 qb288 in series.
Frank Nitty
Well-Known Member
Awesome!!!
