i use ratchet hangers and a piece of 1" electrical rigid conduit to slide through the lights i use a third ratchet hanger in the middle of the conduit to keep it from sagging.
So you converted a one sided carbon filter into a double flanged basically. Hmmm all with a box... simple yet effective.
the carbon filter is a normal round 6" filter that pulls from all directions all the box does is allow the fans suction to be pulled from anywhere with a 6" duct on the side of the box, then when the air enters the box it has to run through the filter to go any further through the duct. i prably could have made a single sided carbon filter to put inline but i had so much spare wood and the filter already so i figured why not.
whats up moose, thanks for the kind words my friend still have a few things to get but for the most part im done. i liked the hempys allot for the larger mothers but the tray is good for mothering multiple strains without taking up allot of space, im not sure how long they will last in the tray though i will have to swap them out more often.So stoked to see the see the progress brotha.....leaps and bounds. A true example for success. Def my next move to upgrade to a larger room with the ebb & grow as well, I'm still rockin the flood and drain and lovin the low maintenance.
How do u like the bubbler for the mums VS. the hempy buckets?
Build it tight, ventilate it right.....hell ya
nice man, im going to build a few as well shit isnt cheap for sure lol i have wanted one for a while now and just got one im pretty happy.
Gravity. When the bucket timer stops flooding, the control bucket drains to a lower 'dry' level. The growing bucket water level also falls to an equal level.
thanks for stopping in buddy, the system is run off of 2 pumps, a fill pump and a drain pump. the fill pump is in the drum/res and when the control bucket kicks on to the fill cycle it turns that pump on causing it to flood all the sites and the control bucket, then when the cycle is done it trips the drain pump (located in the control bucket) to pull the water from the control bucket which is attached to the sites causing all the sites to drain with it. the flood level is controlled by float switches which stop the pumps from flooding the sites.
temps have not exceeded 81 and havent dropped below 69. also bringing in a constant flow of fresh air should help allot.
yup its all bottom feed, the buckets flood 3x a day with lights on and 1x at night, the veg tent stays rocking 24/7, i have 2 flood trays one that vegges clones and the other to keep moms going in both trays are 2x4 and the tent is a 4x8. glad to have you along.Ah, so you are simply bottom feeding then? I'm in the process of desiging one and I've seen only a few live E&G's... all top fed and bottom out, so they have two set's of tube's. You use a flood table for vegging right? I like that idea - I need to keep reading into the thread to get a look.
Great update! BTW, I've been subbed for a few!
