ebb&grow

Status
Not open for further replies.
u need to learn some bash commands , red up on APT get, there is a lot of linux forums , but am guessin your on a flash drive , i think u actually need to go find a hdd unless you got some 40 gb one,
 
mugan said:
u need to learn some bash commands , red up on APT get, there is a lot of linux forums , but am guessin your on a flash drive , i think u actually need to go find a hdd unless you got some 40 gb one,
Click to expand...

oh i learned some bash commands like i bashed the laptop and said fucking piece of shit laptop is not worth spending 150 on a harddrive
im using older linux on cd
but thanks but no thanks im not joining other forums to be able to just use this one
 
Having a bit of a issue with one of my lematek ballasts! Seems when the timer trips the ballasts one dont come
On! But if i unplug the ballast at the ballast and re plug it it fires the buld? And another thing all my bulbs are hps
But this one burns white wtf! Any ideas?
 
hellraizer30 said:
Having a bit of a issue with one of my lematek ballasts! Seems when the timer trips the ballasts one dont come
On! But if i unplug the ballast at the ballast and re plug it it fires the buld? And another thing all my bulbs are hps
But this one burns white wtf! Any ideas?
Click to expand...

Sounds like an issue with the soft start. HPS should only be white on startup, so maybe it's having a problem getting to full power? I would take it back to where you got it if still under warranty. U could try another bulb and see if it does the same thing? but the fact u have to unplug it is a sign somethings not rite.
 
Someguy15 said:
Sounds like an issue with the soft start. HPS should only be white on startup, so maybe it's having a problem getting to full power? I would take it back to where you got it if still under warranty. U could try another bulb and see if it does the same thing? but the fact u have to unplug it is a sign somethings not rite.
Click to expand...

It is under warranty! Soft start hmm makes sense so is that like the ignitor?
 
if you got no waranty, you can try and see if your Balast has over surge protection, if so that happens to protect it, which means you might have to much pull from one line.
 
My main line is 6/2 romex, backed by a 50 amp breaker that run to a spa breaker box then into a cap mlc 8 that feeds
The ballasts, the reason for 2 50 amp breaker is so if there a short or fire i dont have to run across
The room to shut down
 
hellraizer30 said:
Yep i shure to, you will see this alot with plants in hydro! You might try starting a mom in soil
Click to expand...


I'm even worse at soil haha. Do you have trouble cloning the ones that are super hollow? I'm doing an experiment right now to see if the smaller clones heal up faster and don't rot. The hollow ones just have a gaping hole that has to trap bacteria, moisture, and air causing it to rot.
 
hellraizer30 said:
Well not realy but i do have some issue with clone takin from the top of the plant, lowers pop off alot sooner
Click to expand...

Good point. Never really thought about that. I've been taking most my clones from the top now that I think of it. Always knew they say it goes quicker towards the bottom, but never had that issue....
 
hellraizer30 said:
My main line is 6/2 romex, backed by a 50 amp breaker that run to a spa breaker box then into a cap mlc 8 that feeds
The ballasts, the reason for 2 50 amp breaker is so if there a short or fire i dont have to run across
The room to shut down
Click to expand...

sounds like your good on that end. am not very good with ballasts its just that there build just like power supplies and that happens a lot when people try to fit gear into one room
 
Does your ballast have a fuse on it? Some ballast have fuses on them, so it doesn't ruin the product just burns out a fuse. Had that happen once. Didn't realize it until the hydro store guy showed me. lol.
I'm curious, are those T5's for your clones/mothers?
-I.MJ
 
Status
Not open for further replies.
Back
Top