ez cloner help!!

C

cptdangels

New Member
okay so ive used these cloner a little dont know a lot about them ive rooted clones in them befor i have a ez cloner brand cloner now and when i set it up i started to get some white slime so i did some studying and some one told me to run some sm-90 in it and the fresh cutting dont really seam to be doing anything now and a cupple of them got soft and broke or just mushed away what should i do?
 
bass1014

bass1014

Well-Known Member
clean ,clean clean. i made my own ez cloner and have a 100% success rate,i use just straight tap water with a lil hydrogen peroxide and keep the water temps down and you should be golden.. no need to use chemicals or anything just tap water and cool temps.. no dome or anything just a spray ever now n then...
 
J

JayKitchen

New Member
I mist the clones in my EZ at least twice daily with a spray bottle, generally with plain water and find it helpful. Also typically use just water, a little hydrogen peroxide and if I'm feeling like it a few teaspoons of AZOS in the reservoir.

J
 
ProfessorPotSnob

ProfessorPotSnob

New Member
Most cloning machines will fail during the summer months and in high temp environments . The pumps are to blame as they further warm the water or cloning solution . Most people tend to use timers to relieve this issue along with a air stone . The best timer to use if a NFT timer , I use a 1 on and 4 minute off model and it never fails . I also am fond of cement floors and air conditioning to relieve this issue . In the end it is easier for me to just maintain a room temp of 72 F as most cloners are made to run at this temp .
 
thenotsoesoteric

thenotsoesoteric

Well-Known Member
ProfessorPotSnob said:
Most cloning machines will fail during the summer months and in high temp environments . The pumps are to blame as they further warm the water or cloning solution . Most people tend to use timers to relieve this issue along with a air stone . The best timer to use if a NFT timer , I use a 1 on and 4 minute off model and it never fails . I also am fond of cement floors and air conditioning to relieve this issue . In the end it is easier for me to just maintain a room temp of 72 F as most cloners are made to run at this temp .
Click to expand...
Nailed it.
 
Alaric

Alaric

Well-Known Member
ProfessorPotSnob said:
Most cloning machines will fail during the summer months and in high temp environments . The pumps are to blame as they further warm the water or cloning solution . Most people tend to use timers to relieve this issue along with a air stone . The best timer to use if a NFT timer , I use a 1 on and 4 minute off model and it never fails . I also am fond of cement floors and air conditioning to relieve this issue . In the end it is easier for me to just maintain a room temp of 72 F as most cloners are made to run at this temp .
Click to expand...
Bravo!

I once measured ambient water temp vs 24/7 pump running in a power cloner------10 f delta.

A~~~
 
LoRd MeGaTR0N31

LoRd MeGaTR0N31

Well-Known Member
I drop 5 drops of bleach in my cloner every 4days. In two weeks my roots are bright white and about 3-6 inches long with my reservoir temps being 80 degrees. I've never had slime issues since I started adding bleach clones look nice and healthy btw.
 
209 Cali closet grower

209 Cali closet grower

Well-Known Member
cptdangels said:
okay so ive used these cloner a little dont know a lot about them ive rooted clones in them befor i have a ez cloner brand cloner now and when i set it up i started to get some white slime so i did some studying and some one told me to run some sm-90 in it and the fresh cutting dont really seam to be doing anything now and a cupple of them got soft and broke or just mushed away what should i do?
Click to expand...
you have a bacteria diseases. and once they get that white snot slim looking stuff, there died. i tride stuff from the pet shop, for fish water. To no luck. last,s thing i was goi g to try was pool shock. but just sold the ez cloner. what is sm90? mite stuff?.
also my ez cloner was used.
 
You must log in or register to reply here.
Top