Failing in cloing will try this hope it works!!

Hi, I been failing in cloning big time. I lost a lot of clones too. I tried bubble and , rockwool method with nothing but mushy hollow dying stems.

Bubble Cloning kept everything cleaned 78F water temp and kept the stem in the water add h202. All but one survived.

Rockwool humidity dome the temp inside the dome was 84F had the clones under a heating mat mist them 3 times a day.Opened the dome three times a day for airflow to come. Used cloing gel made sure no bubbles. All died but one. Within 3 days.

I used 1 24 watt flour I bought at wal mart.

I kept everything cleaned and cut the clone correctlly.

I been thinking it has to be the tempreture. I will try to keep temps in the 72F-76F range. It may take longer to root but I dont see no other way. My strain is Master Kush@

I am trying this method I found online I hope it works!!

http://www.eioba.com/a40230/how_to_c...s_with_success

ps. I dont think he used a dome in his article?

I dont know whats the problem because it sounds like you are doing it right.Its not hard to clone all you have to do cut,dip in gel and plant in medium.Make sure no air gets in when you cut.I usually put mine in a dome and mist whenever it looks dry.Try clipping some fan leaves too.Mine usually take 7-10 days to root good luck on your next try.

air embolism......putting ur cuttings in a cup of water right after they r cut will prevent this
or make another under water and dip in hormone

Some are harder to clone than others, but you may just need to adjust your technique. When you take the cutting make sure there's a node where you would expect roots to come out of, cut off those leaves but leave about a quarter inch stem, which will die off when the roots begin to form....you do want the temps to be a little warmer than 75, mist the underside periodically...