purextract
New Member
Here is some of my great material below!

Here is the product after the material has been chopped up to fine, dry out, then frozen, and stuff into a glass tube blown into a Pyrex dish. (Using 5x Power)
Then I scraped onto the oil slick pad after all the butane appeared to be evaporated.

This is the product at 110F 29HG (The stuff in the corner is just some smashed together)(4hours)

115F Still purging at 29

After it stopped bubbles at 115F This is the end result after i took it out of the chamber (Still alot of butane)

Another picture out of the first vac.

After the first vac i combined the product and it turned out dark like this.

Back in the chamber 2nd vac @ 110F (2hours)

This is the product after it stop bubbles on the 2nd vac. (Still tons of butane)

This is it going again onto the 3rd vac. Combined it together again and let it purge again 115F 29HG

Took the product out still tons of butane after many hours at full vac so
i took it out and spread it all out on the new paper and put it back in the vac like
the picture below.

Then combined it and it came out like this (this is only a piece of it) it's still really dark with tons of butane and cracks and bubbles when you light it.

Looking for any help or tips to get this going in the right direction thanks!

Here is the product after the material has been chopped up to fine, dry out, then frozen, and stuff into a glass tube blown into a Pyrex dish. (Using 5x Power)
Then I scraped onto the oil slick pad after all the butane appeared to be evaporated.

This is the product at 110F 29HG (The stuff in the corner is just some smashed together)(4hours)

115F Still purging at 29

After it stopped bubbles at 115F This is the end result after i took it out of the chamber (Still alot of butane)

Another picture out of the first vac.

After the first vac i combined the product and it turned out dark like this.


Back in the chamber 2nd vac @ 110F (2hours)

This is the product after it stop bubbles on the 2nd vac. (Still tons of butane)

This is it going again onto the 3rd vac. Combined it together again and let it purge again 115F 29HG

Took the product out still tons of butane after many hours at full vac so
i took it out and spread it all out on the new paper and put it back in the vac like
the picture below.

Then combined it and it came out like this (this is only a piece of it) it's still really dark with tons of butane and cracks and bubbles when you light it.

Looking for any help or tips to get this going in the right direction thanks!