First grow first tent setup few questions

This will be my first grow plan on doing soil maybe switch to hydro on the next run. This is what I have on the way so far.
1 4x4 gorilla grow tent
1 ac infinity cloudline t6
1 6x20 phat carbon filter
4 hlg diablo boards with heatsinks
1 EUD-600S280DT driver

First question will I need a separate hygrometer or will I just be able to use the one on the cloudline fan? Also any recommendations as far as what meters to get for ph ppm etc? Anything else I'm missing or not thinking of?

Thanks in advance for any help

Yes you want a hygrometer, or three, they don't cost much.

Blue lab make great EC truncheons and ph testers.

You want a few circulation fans, preferably oscillating , clip on or tower or pedestal.

Timer for your lights.

Ducting for your fan and filter and clamps for that.

Think about temp and humidity control. Do you have a decent fresh air source? Can the exhaust fan alone control temp and RH? You can run the temp in the low 80's with those LEDs.

It will be inside in spare bedroom central ac humidity outside is usually very high were I'm at though so may need dehuey if so is the inkbird controller pretty much the goto? And any recomendations on dehumidifiers total room size is 12 x 14 tent will be in the corner

Clinton213 said:

It will be inside in spare bedroom central ac humidity outside is usually very high were I'm at though so may need dehuey if so is the inkbird controller pretty much the goto? And any recomendations on dehumidifiers total room size is 12 x 14 tent will be in the corner

Click to expand...

I use an 2 inkbird controllers for my 4x4 LED grow. One for AC, one for DH. I think a 30 pint can handle that room.

Ordered this ph pen.

And this ec/ppm meter.

Will those two pretty much cover everything as far as soil and water/nutrient testing?