yes they could but u are going to be in deep shit really quick .................i started of with cfl and then moved to a t5 and then to a hid
cfls once the plant bushes are not effective do to the need of more to cover the area and building the lights...as u add more to it the heat amount increases to
if u are going for on the cheap but has the most effective results here it is
u said a 1x2 so that means u picked a spot
light 1 .............use this for the growth stage .......u can change the bulbs out with a set of 3000k for the flowering ....they come with 6500k u need 3000k...or one of each for the whole time
light 2.............u can get a
clip on light in the work light section make sure it is rated 150watt your bulb is 120 ......this gets the middle and lower bud sites with maximum goodness........u need 2 one for each plant
to hang the light take some eyebolts/
hook with screw in (2 choices u work them in the top of the thing by hand then take it out and put in something good..... lock nut/ jb weld /gorilla glue or u drill it then do the good stuff and then put it in but u need the good stuff saftey).............u need
rachet rope hooks if the hooks are to big for eyebolts u can make a loop with string and hook in the loop
this will take up the whole space u said u have ............the air intake is at the bottom.......u need to have a hole somewhere at the least to let the air in (this is passive system ) .............up top of your area u need to
make this carbon scrubber yourself and this
80 cfm booster fan as for attaching it u have to do that u hang it at the top of the area and make a hole.....hole ducting fan ducting carbon scrubber is the order .......when u do this u want to have the intake hole on the other side from the exhust hole this gets u the best venting with passive
as for power u make a hole and get a
hole cover and then a
power strip with timer i put the power stirp inside and bolt it down the ......u plug the t5 and the clip on lights when u use them into side with timer on it other side have the fan in .......your fan must always suck the air out so plants get cool fresh air always
and here is the part no one has told u yet ............make the holes plan where u are going to attach the hooks and how u want to hang the fan and scubber ..............now before u put anything up hang anything (u made the holes tho ) u need to line the
whole inside with panada film ......silver side showing u can use some double side tape and glue....
look at videos about wallpapering..............cut away the stuff blocking the holes and then u start adding in all the hardware for mouinting power strip and hanging the whole thing............foil does not work it only keeps the heat in this stuff is made for light defusing for plants u need it 100% no shit cough up the cash
this is the cheapest system i am willing to help u make anything other then this one i would not be a good amish fucker for allowing u to make something that is not decent ...........this system as it stands built here is the lowest work i am willing to allow my name to be posted on my first one would do u a much better job but this one will get u 14 grams a plant maybe 20