First grow

Krondizzel

Krondizzel

New Member
Well, what I mean, is you'll be comparing your feed water PH to the runoff PH at the bottom to see what's going on inside the pot potentially.

PPM, well, you want to know how strong of a nutrient batch your making so that you don't overdose and toast your shit. Less is seriously better in this dept and a PPM is a simple, higher is more, lower is less number so.. you can gradually increase over time.
 
Dannoo93

Dannoo93

Well-Known Member
Ya i just read like 3 different things for em to further my knowledge :) and looked at em on amazon...anything else i should probably pick up thats not outragesely expensive
 
Krondizzel

Krondizzel

New Member
Don't forget your calibration solution if you buy a PH pen. Some come from the factory and aren't within calibration so you'll have to do it yourself. Simple shit.

Mine has a PH 7 and a PH4/10 calibration. To calibrate, dip in PH 7 solution, wait for the number to settle, and adjust to 7.0

Then, if you have the 4/10 also, you'll dip in 4, calibrate to 4.0 and your done.

dont let the electrode or sponge dry up. it can ruin your pen.
 
Cobnobuler

Cobnobuler

Well-Known Member
Be careful, if you buy a cheap meter and the numbers its giving you are not accurate, you can do a lot more harm than good. I bought a Hanna meter for 25.00 and it simply wouldnt stay calibrated. It became a headache and I just couldnt afford a better one.
 
Krondizzel

Krondizzel

New Member
Cobnobuler said:
Be careful, if you buy a cheap meter and the numbers its giving you are not accurate, you can do a lot more harm than good. I bought a Hanna meter for 25.00 and it simply wouldnt stay calibrated. It became a headache and I just couldnt afford a better one.
Click to expand...
I hear this a lot. I can't afford it. Well, you get out of what you invest into it. Time, money, equipment, etc. So usually it's worth it. My hanna works pretty good. No problems yet. Watch out for the pens/meters that you cannot calibrate. Once they go out, they're done.
 
Dannoo93

Dannoo93

Well-Known Member
alright havent put anything on here in a while my phone broke so had no way to update...but right now im making a grow stealth dresser its 6ft tall 30 inch wide and 21 inch deep...so i figure i should be able to grow one good size plant in there and i will be buying a 250 watt hps/mh setup for it
 
Dannoo93

Dannoo93

Well-Known Member
already placed the order its for a 400 watt dimmable hps/mh with both bulbs and ratchet hangers for like 140 bucks
 
Dannoo93

Dannoo93

Well-Known Member
dresser.jpgkinda crappy quality had to use my gfs old pos should get my new one in the mail tmrw....
measurements 6ft tall 30 wide and 20 deep...5ft for the grow area and 1 ft for a storage below for the ballast and other stuff
 
You must log in or register to reply here.
Top