FIRST TIME closet grow Supplies, Measurements, and Pictures of room...

Whats up "Roll it up" readers. My names Luffy the Pirate King and I'm attempting my first closet grow! I was hoping for positive feedback and tips from all you pros out there. I'm going to list the stuff I've acquired for my room so far, along with my first picture of the gutted closet. Starting my plants from Clone form not Seeds.

ITEMS:

Lighting: 1x 400 Watt Grow Light Digital Dimmable HPS MH System for Plants Air Cool Tube Hood Set

Air Flow / Duct : 6-inch 240 CFM Air Duct Inline Hydroponic Booster Fan with 6 inch 25 foot aluminum duct

Soil: 3x Fox Farm 12-Quart Ocean Forrest Organic Potting Soil

Nutrients: Fox Farm Liquid Nutrient Trio Soil Formula: Big Bloom, Grow Big, Tiger Bloom

General Hydroponics Ph Control Kit

Ph soil tester

Soil Test Kit

Soil Moisture Kit

Indoor Humidity Monitor

Black Plastic Sheeting

Mylar reflective film

Power strip with surge protection

5-gal hydroform pots (4 of them)

Room Measurements: 30 inches deep, 32 inches wide, 78 inches tall
1497598_776510349042920_2030172741_n.jpg

Thank you all for taking your time to read over my post and I hope to hear back from you all soon! Stay medicated my friends.:joint::eyesmoke: kiss-ass
 

Drug

Well-Known Member
are you worried about odor control at all?

if you are you should invest in a carbon filter
 

sdf

Well-Known Member
sounds like a solid set up my pirate friend

what strain art thou growing
 

d3dm4n

Member
I would get some bigger pots ... just cause i dont like transplanting when they are big (and i got a small pot)... also to cut down on soil cost you can mix 2 40lb bags of fox farm soil with a bale of promix
 
I would get some bigger pots ... just cause i dont like transplanting when they are big (and i got a small pot)... also to cut down on soil cost you can mix 2 40lb bags of fox farm soil with a bale of promix
How much larger do you think? Also thanks for the advice on soil. I'll be looking into that.
 
Hey Roll It Up readers, I had a question about my setup. I currently have an inline exhaust with duct setup to keep the warm air pushing out. Am I also going to need an intake fan of some sort to bring new air in? As you guys can see the room is not the largest. I was hoping I'd be able to save a little money and just open the door to get new air in? I'd love to hear everyone's opinion.
 

sdf

Well-Known Member
good strain lol. If you want an easy grow medium, use coco coir. I love it personally, and with coco you can use a 1gal pot and it can get huge, theres people who grow regular sized plants in 3l bottles.you dont really need a fan, normally air can come in through the gap under the door. If your door sits low on the ground you can always shave 1/2 an inch off the bottom, no one will notice and if you ever need to change it you can get a good door for like 50$
 
good strain lol. If you want an easy grow medium, use coco coir. I love it personally, and with coco you can use a 1gal pot and it can get huge, theres people who grow regular sized plants in 3l bottles.you dont really need a fan, normally air can come in through the gap under the door. If your door sits low on the ground you can always shave 1/2 an inch off the bottom, no one will notice and if you ever need to change it you can get a good door for like 50$
SOUR DIESEL GODS DO ME GOOD THIS FIRST GROW. I love Sour D. Perfect answer, that's whats up! The room just so happens to be a little above ground level with an area for air to seep in. I can't wait to get this thing going. I should be completing the room-setup tomorrow 12-20 PST so I'll make sure to add picture updates as the process continues. Veging Should start within a week, most likely much less! = D
 

MrWally

New Member
I would watch your Humidity levels I am over kill on my exhaust fans, the one you are using I just run to cool my light then I run a second that is like 420cfm to really move the air. It makes it easy to maintain levels of temps and Humidity. As for a inlet fan, you just need a opening that will allow air to come in others wise you make a big vacuum and your fan will work a lot harder and could possible burn out. I install a duct registry and put a filter on it to filter air before it enters my room.
 

Attachments

I would watch your Humidity levels I am over kill on my exhaust fans, the one you are using I just run to cool my light then I run a second that is like 420cfm to really move the air. It makes it easy to maintain levels of temps and Humidity. As for a inlet fan, you just need a opening that will allow air to come in others wise you make a big vacuum and your fan will work a lot harder and could possible burn out. I install a duct registry and put a filter on it to filter air before it enters my room.
Thanks Mr. Wally!
 
ROLL IT UP,

I received all my supplies today. Tomorrow morning the pieces get put in place. If all goes well I'll have some clones in there by the end of the night! This forums has been a lot of help. You guys are of much help!

With much respect,
Luffy the PK

1534440_777783978915557_227087078_n.jpg
 
Room almost done, tomorrow I will mount the osalating fan for air circulation, prepare my clones in the pots, and get to veging! YEA BUDDY = )!
1528706_778207258873229_1300661560_n.jpg1495495_778207182206570_1619921511_n.jpg

NOTE: The Light is hanging low right now, but there is still plenty room to raise it another 4-5 feet.
 
Finally up and running! I've got my clones transplanted and vegging, going on about 16 hours now, almost time to knock the lights out. I ended up going with a hybrid strain of Sour Diesel crossed with San Fernando Valley OG - "Sour OG". Talk to you all soon!1503348_779132272114061_592714787_n.jpg
 

d33p

Member
In your last pic LuffyakaDJames it looks like your plants are stretching, the light might be a little too far away.
 
Top