for 1,8m2 4 sets enough?
- Thread starter jungpot
- Start date
Randomblame
Well-Known Member
Tripple this!
You will need ~30-35w per sft., 1,8m² are 19,4sft. So I call it 20sft, multiply this with the 30-35w and you need 600-700w!
12 COB's, 3 hlg-185h-c1400 or 2 hlg-320h-C1400
You can start with one of this setups to veg and add the other two 4 COB setups later or start with a 6 COB/hlg-320 setup and add another one later.
Remember, you would need 1000w of hps for this space...
hi my last question before i order. so pls explain me what is better.
12sets: CXB3590 3500K + Thermal pad + 50-2303CR + 50-2300AN + Reflector KB-D82-90RF
12pcs: Φ133*H70mm(for 50-60W)
2pcs: MW HLG-320H-C1400A
or
12sets: CLU048 1216 3000k/90RA + Thermal pad + 50-2303CR + 50-2300AN + Reflector KB-D82-90RF
12pcs: Φ133*H70mm(for 50-60W)
2pcs: MW HLG-320H-C1400A (is this driver enough)
12sets: CXB3590 3500K + Thermal pad + 50-2303CR + 50-2300AN + Reflector KB-D82-90RF
12pcs: Φ133*H70mm(for 50-60W)
2pcs: MW HLG-320H-C1400A
or
12sets: CLU048 1216 3000k/90RA + Thermal pad + 50-2303CR + 50-2300AN + Reflector KB-D82-90RF
12pcs: Φ133*H70mm(for 50-60W)
2pcs: MW HLG-320H-C1400A (is this driver enough)
Randomblame
Well-Known Member
Looks pretty much the same!
It depends on what you want,
- CRI80 means 1-2 weeks more, but better yield, more nodes, lower heights,
- CRI90 is 1-2 weeks faster, but less yield, less nodes and more stretch.
Time savings should offset less yield in a permanent setup, 6 possible runs with CRI80 per year vs 7 with CRI90...
It depends on what you want,
- CRI80 means 1-2 weeks more, but better yield, more nodes, lower heights,
- CRI90 is 1-2 weeks faster, but less yield, less nodes and more stretch.
Time savings should offset less yield in a permanent setup, 6 possible runs with CRI80 per year vs 7 with CRI90...