Deepwater600ppm
Member
Hi,
This is my first post
I lurked this forum a lot when I was researching DWC, since then I have figured a few things out.
The best advice I can give is learn from 'hygrohybrid' and do a version of HHT (hygrohybrid theory). Dude pulls a pound per plant easy, it's nothing to him and he teaches how to do it like a Kung Fu master.
Anyway, here are my fundamentals.
-BUILD YOUR OWN KIT.
It's like building a light saber. You will understand it if you build it.
-USE A LOT OF WATER
I would allow 60l per plant in rdwc, it acts as a massive buffer to prevent most issues with feeding.
-BLOCK ALL LIGHT TO RES, ALL OF IT, EVERY LAST DROP OF LIGHT.
This is the most important thing of all in my opinion. Use black air tubes, thick tubs, put covers on top of mesh pots, cover with whatever you can. Blankets, Mylar, cardboard.mif you have root rot, it's because of light in the tank, I almost would bet on it. Check, and check again.
-BIG AIR PUMP
The more air the better, pump as much in as you can, go crazy. There is no such thing as too many bubbles, but try to keep air pump cool.
IF THE WATER IS DIRTY, CHANGE IT.
When things are going well and everything is dialled in, you will know when to change water. And don't make it a big deal.
USE WATER PUMP TO EMPTY RES/TANKS
It's a recirculating system, I have my pump submerged in control tank, when it's time to empty I simply attach a hose pipe to pump and empty down drain. To refill, the same. Just use a hose or pump. Easy.
EC/PPM and PH
Veg, 400-600ppm. Never go over.
FLOWER 600ppm base with up to 200ppm on top of boosts etc. so no more than 800ppm. Ever...Ever.
DON'T USE H202
if your roots are slimy, poorly brown, smelly, dead, not growing etc, anything but amazing it is because you have light leaks or stupid high res temps. Block all light. Any hole for tubes, lid on properly, covered with other stuff to be sure. Mesh pots covered.... Do all this and if you need to, run H202. You should however use very small quantities of beneficial bacteria instead. I personally would get a sample size of VOODOO JUICE from eBay, de cantered from a big bottle to save spending a fortune on something you only need two or three times a cycle. Your roots should amaze you every time you see them.
Veg roots should be like rice noodles, almost identical.
Flower roots should be huge, thick chunky.... You'll see them grow and understand by the time you flower.
EXPECT MASSIVE PLANTS.
In veg you need to be monster cropping, you want at least 10 main branches. FIM, top, bend...net them ready for that scrog. It's important to have a big enough plant, or number of plants to fill a screen. They will get huge with all the airstones and tank size, and stretch insanely. Like nothing you have seen in coco. In my opinion, 2 plants should be more than enough for a 600w light and scrog. You want that horizontal growth and a low canopy. With everything even. I could talk forever about this but that's a different thread, and I'm no scrog expert. Just learn from hygrohybrid.
So, that's it.
NO LIGHT LEAK!!
A MASSIVE AMOUNT OF RECIRCULATING WATER (in flowering room)
NUTES 600ppm ph, 5.8-6.1 for most plants. Water temp 18-22c
BIG AIR PUMP
USE WATER PUMP TO EMPTY FILL RES Just smoke a joint.... Can be done in 40 mins if not tinkering.
SMALL AMOUNT OF BENEFICIAL BACTERIA.
It doesn't take long to learn, but you need to understand it.
Anyway... Good luck!
This is my first post
I lurked this forum a lot when I was researching DWC, since then I have figured a few things out.
The best advice I can give is learn from 'hygrohybrid' and do a version of HHT (hygrohybrid theory). Dude pulls a pound per plant easy, it's nothing to him and he teaches how to do it like a Kung Fu master.
Anyway, here are my fundamentals.
-BUILD YOUR OWN KIT.
It's like building a light saber. You will understand it if you build it.
-USE A LOT OF WATER
I would allow 60l per plant in rdwc, it acts as a massive buffer to prevent most issues with feeding.
-BLOCK ALL LIGHT TO RES, ALL OF IT, EVERY LAST DROP OF LIGHT.
This is the most important thing of all in my opinion. Use black air tubes, thick tubs, put covers on top of mesh pots, cover with whatever you can. Blankets, Mylar, cardboard.mif you have root rot, it's because of light in the tank, I almost would bet on it. Check, and check again.
-BIG AIR PUMP
The more air the better, pump as much in as you can, go crazy. There is no such thing as too many bubbles, but try to keep air pump cool.
IF THE WATER IS DIRTY, CHANGE IT.
When things are going well and everything is dialled in, you will know when to change water. And don't make it a big deal.
USE WATER PUMP TO EMPTY RES/TANKS
It's a recirculating system, I have my pump submerged in control tank, when it's time to empty I simply attach a hose pipe to pump and empty down drain. To refill, the same. Just use a hose or pump. Easy.
EC/PPM and PH
Veg, 400-600ppm. Never go over.
FLOWER 600ppm base with up to 200ppm on top of boosts etc. so no more than 800ppm. Ever...Ever.
DON'T USE H202
if your roots are slimy, poorly brown, smelly, dead, not growing etc, anything but amazing it is because you have light leaks or stupid high res temps. Block all light. Any hole for tubes, lid on properly, covered with other stuff to be sure. Mesh pots covered.... Do all this and if you need to, run H202. You should however use very small quantities of beneficial bacteria instead. I personally would get a sample size of VOODOO JUICE from eBay, de cantered from a big bottle to save spending a fortune on something you only need two or three times a cycle. Your roots should amaze you every time you see them.
Veg roots should be like rice noodles, almost identical.
Flower roots should be huge, thick chunky.... You'll see them grow and understand by the time you flower.
EXPECT MASSIVE PLANTS.
In veg you need to be monster cropping, you want at least 10 main branches. FIM, top, bend...net them ready for that scrog. It's important to have a big enough plant, or number of plants to fill a screen. They will get huge with all the airstones and tank size, and stretch insanely. Like nothing you have seen in coco. In my opinion, 2 plants should be more than enough for a 600w light and scrog. You want that horizontal growth and a low canopy. With everything even. I could talk forever about this but that's a different thread, and I'm no scrog expert. Just learn from hygrohybrid.
So, that's it.
NO LIGHT LEAK!!
A MASSIVE AMOUNT OF RECIRCULATING WATER (in flowering room)
NUTES 600ppm ph, 5.8-6.1 for most plants. Water temp 18-22c
BIG AIR PUMP
USE WATER PUMP TO EMPTY FILL RES Just smoke a joint.... Can be done in 40 mins if not tinkering.
SMALL AMOUNT OF BENEFICIAL BACTERIA.
It doesn't take long to learn, but you need to understand it.
Anyway... Good luck!
Last edited: