G13 Blueberry Gum, Stealth Sock Drawer CFL

jdillinger

jdillinger

Active Member
Note: Nice to see a Stealth Forum :). Thats the only way to grow for people with non-smoking roomates :D.

Hey guys, I'm halfway through my other grow flower, decided to make a reservation as my new seeds came in today :) Thank you herbies with another successful delivery to Australia. Theyve already cracked their shells. Great Genetics G13 :)

Heres a picture of the cab, I took out the light shields so you can see the light leaking out, and the only inconspicuous thing about it is the lock on the front and the fan vents on the back :).
DSCF1491.jpg

Stay tuned for plant pics :). Growing in my own version of the hempy bucket, pure perlite.
 
MyNameIs

MyNameIs

Active Member
Really want to see what the inside looks like! I have a similar setup, size and eveything. Are you worried about any problems with vertical growth?
 
jdillinger

jdillinger

Active Member
wyteberrywidow said:
Nice little setup.. Glad to see the new sections are up pm me if any problems or for anything for the matter.
Click to expand...
Will do thanks for stopping by :).

MyNameIs said:
Really want to see what the inside looks like! I have a similar setup, size and eveything. Are you worried about any problems with vertical growth?
Click to expand...
Thanks for stopping by :). I'm not really worried about vertical growth since I Tied down to reach an even canopy, and I control when it flowers. Pictures of the inside after the jump since I cant find my camera somehow :(.
 
gingerbuddha

gingerbuddha

Active Member
why did you make it less lightproof?? like everyone else said i wanna see the inside! you better get that thing lightproofed for flowering buddy!
subbed
 
jdillinger

jdillinger

Active Member
gingerbuddha said:
why did you make it less lightproof?? like everyone else said i wanna see the inside! you better get that thing lightproofed for flowering buddy!
subbed
Click to expand...
I took the lightproof out because I was moving the level up and down, hard to explain I'll show tommorow what I mean :).
 
jdillinger

jdillinger

Active Member
Nothing exciting just posting up my cab.

Heres the pics of my grow box:
DSCF1493.jpgDSCF1496.jpg
This is the platform so I can adjust how close my plant is to the light (aforementioned the thing I have to take out the weatherproofing to move :()
DSCF1498.jpg
Intake:
DSCF1494.jpg
Outtake:
DSCF1495.jpg
Backview:
DSCF1497.jpg
Germinating Blueberry Gum:
DSCF1499.jpg

So like I said nothing that exciting but sub and we'll get this plant growing ;)
 
jdillinger

jdillinger

Active Member
BTW: I will be tying this down, does anyone know how tall this strain grows during flower, and whether its friendly to training?
 
GunRunner

GunRunner

Active Member
That lock is a serious giveaway. try this instead, Drill a small hole at the top edge of the cabinet at the front side where the door closes. Next drill another hole into the door. make sure both holes are aligned so if you drop a steel rod inside it will lock the door in place. You use a magnet to remove the steel rod every time.
 
jdillinger

jdillinger

Active Member
GunRunner said:
That lock is a serious giveaway. try this instead, Drill a small hole at the top edge of the cabinet at the front side where the door closes. Next drill another hole into the door. make sure both holes are aligned so if you drop a steel rod inside it will lock the door in place. You use a magnet to remove the steel rod every time.
Click to expand...
Funnily enough, I did think of that, prob is I reinforced the door with steel rods between every drawer face. So the steel rod would only go so deep, plus I wouldn't trust a little steel rod to protect my bud, I trust hard copper locks :).
 
jdillinger

jdillinger

Active Member
BongHolyeo said:
How have the temps and humidity been in the box?
Click to expand...
Hey BG, thnx for stopping by. Tbh I don't know :( I have to pick up a hum/temp box haha. But those are 3x65w so if I don't keep vent on when the lights are on. it gets pretty fucking hot. but I know it gets pretty humid as well if I don't vent.
 
KawiZZR

KawiZZR

Active Member
jdillinger said:
Funnily enough, I did think of that, prob is I reinforced the door with steel rods between every drawer face. So the steel rod would only go so deep, plus I wouldn't trust a little steel rod to protect my bud, I trust hard copper locks :).
Click to expand...
Not to rain on your parade but wouldn't it make more sense to make it as stealth as possible? If someone sees it locked they may take the whole thing just based on the assumption there's something valuable in it?
 
gingerbuddha

gingerbuddha

Active Member
KawiZZR said:
Not to rain on your parade but wouldn't it make more sense to make it as stealth as possible? If someone sees it locked they may take the whole thing just based on the assumption there's something valuable in it?
Click to expand...
And that's why i chose to keep my cabinet lockless. It looks much more stealthy.... also light leaks are dead give aways... ESPECIALLY since your cab has "drawers"
 
KawiZZR

KawiZZR

Active Member
gingerbuddha said:
And that's why i chose to keep my cabinet lockless. It looks much more stealthy.... also light leaks are dead give aways... ESPECIALLY since your cab has "drawers"
Click to expand...
That's what I'm thinking. My last cab had a kickplate along the bottom edge so I took that off and put a drawer lock up from there. Looked normal enough from the front without sacrificing too much security.
 
jdillinger

jdillinger

Active Member
Relax I put the weatherproof back lights not leaking anymore. Lock though well I guess, hmm well I guess I could try it from the side. since I can't do it from the top. Ill look for a rod to put through. ;)
 
BongHolyeo

BongHolyeo

Active Member
i think the lock and light leaks will be fine for your first grow man just throw a hygrometer in there and put a blanket over the box to cover it up or something. we all have to start somewhere my box aint perfect either
 
You must log in or register to reply here.
Top