LoganSmith
Well-Known Member
lkop,0o
.,=[-l
.,=[-l
Ya, The Cloner Is Getting There......You Might Have To Raise The Mister Bar Up, Abot 4" To 6" To Get The Basket's Good & Soaked, I Have Used Those Mister's In The Past, They Do A Good Job, Just Stay On Top Of Them & Check To Make Sure Stuff Doesn't Get Caught Under The Cap, If It Does You Can Pop The Cap Off Real Easy & Clean Them.Here is my new cloner, not finish yet but getting there.
Peace-
AAAAUUUUUUUHHHHHHH, HHHHHHUUUUUUUU???????????????????????neutral:lkop,0o
.,=[-l
What up??????????????
Your drawing is what my area looks like now, just with out the doors and aero pod.
As of now I'm just getting the aero cloner done. I got the same sub pump that you have 258gph for 15 bucks. U got to love HF. I will take some pics and show you.
Ya, The Cloner Is Getting There......You Might Have To Raise The Mister Bar Up, Abot 4" To 6" To Get The Basket's Good & Soaked, I Have Used Those Mister's In The Past, They Do A Good Job, Just Stay On Top Of Them & Check To Make Sure Stuff Doesn't Get Caught Under The Cap, If It Does You Can Pop The Cap Off Real Easy & Clean Them.
The Only Other Thing Is I Like To Use The 10 Gal. Rubbermaid's For The Clone's, 1) They Are Only 9" Tall & You Can Get Them Is A Smaller Area. 2) The Mister Bar Doesn't Have To Be As High.
But , Look's Like You Have A Good Start. Keep Working On It!!!!
Ahh, this would be my puppy she likes to get down and put her paws into things, I guess she hit the submit key. hahaAAAAUUUUUUUHHHHHHH, HHHHHHUUUUUUUU???????????????????????neutral:
I guess it could be, but the only thing that I really don't like is that when I need to check on the top I have to use a ladder. Dam short gens.This Is A Good Think??????EH??????
No, The 20 gal. & 40 Gal. Are Just For The Res's, You Would Just Need One Or The Other.
OK, When I Lay Out The Top's For The Hole's, I Find The Center Of The Top, & Put Some Refferance Line That Cross In The Middle, Then I Lay The Sites Out In Row's, I Have Some where I Have 3 to A Row, 4 , 5, & 6....The More You Get The Harder It Is, But Take Your Time, Get It All Laid Out Before You Get Drill Them Out With A 2" Hole Saw.
Yes I Get Alot Of My Stuff From Botanicare - Plant Energy Products
I Also Use Pump's & Nut's From GENERAL HYDROPONICS
I Get Stuff Here Also
Intelligent Irrigation Solutions ,Drip Irrigation .
You Can Find Everything Through These Link's, Or Your Local Hydro Store's, Home Depot, Lowe's.
Hey I'll Put Up A Picture Of Some Of The Top Lay Out's.
Say Bro, Same Here, I Have To Get On A Small Ladder To Get To My Clone Chamber's, I Have Just One of Those Little Kitchen Step Stool's, Work's Good, & It Fold's Up..........I Like The Flowering To Be On The Bottom, So The Res. Is On The Very Bottom....Guess You Can Do It, To Suit You????I guess it could be, but the only thing that I really don't like is that when I need to check on the top I have to use a ladder. Dam short gens.
That Dude Just look Taller Then 9", More Like 12"?????This is a ten gallon container. And these are micro jet heads, I got misters but they didn't seam to work. ???
Ahh, this would be my puppy she likes to get down and put her paws into things, I guess she hit the submit key. haha
LOL....Hey, He, Or She Was Just Tying To Help, & Add There 2cent's, Just To Bad We Need A Translater????,,,,,,Me No Savy CoonDog Short Paw???????HEHEHEHEHE
Rep to you Hatch - enough fucking said
Well Sir, This Is Grow-Room's Design & Set-Up's Form Right????,,,,,,,,,,,,And All The Picture's Of My Stuff, Are To Help Other's In There Setting Up There Stuff!!!,,,Sorry If It Wasn't Helpful Or Entertaining For You????y dont you take pic's of your plant...and only of growroom/stuff...
da plantDOC.... I WOULD LIKE TO SEE WHAT ALL THAT STUFF GROW'S...
no i did not mean eney disrespect but it's a grate room and i would love to see what could come out of it so am sorry if you took my post the wrong way...so keep up the hard work..and good luck..da plantDOC