Roseman's Tips, Tricks and Troubleshooting Guide for STEALTH HYDRO BUBBLEPONICS AND MOST OTHER HYDRO GROWS.
Dirty Water? Yellowing? Curling? Algae? pH?
This will help you and is comprehensive.
Reading the Instructions
Every time we hear, read or receive a complaint about a problem with the StealthHydro Bubbleponics System, it was because the person did not read and fully understand all of the instructions, or they did not understand what the system is all about. This TIPS, TRICKS and this TROUBLESHOOTING GUIDE should answer and help you with any problem you might encounter.
Keeping Size in Perspective
This system was not designed to row six 6-foot tall Christmas Trees. (Although we have grown 3 plants, 3, 4 and 5 feet tall in one tank.) We have heard a few growers tell us "I just realized that the 6 plants are going to get very crowded after they get 3 or 4 feet tall". This system was not designed for 6 giant plants. There is a reason that the tank is 21 and a half inches long. When this system was originally designed, many factors went into deciding what size tank and pumps to use. The main factors were economy, simplicity, stealthness, and making sure the tank would fit into the end of a small closet, out of the way and out of sight. We've heard of a few growers that try to change to a much larger tank, and realize how much more work and trouble is involved in using a larger tank and moving larger quantities of water. Draining and replenishing the water can be a major task in a much larger tank. Not only are more larger and expensive air and water pumps needed for a larger tank, but larger pumps make more noise. Draining and cleaning a larger tank is a ton of work and trouble too. If you want to go with a bigger system, then connect two tanks together. And if you want to grow large plants, then start them in the Bubbleponics System, then transfer them into the Bucketeer Large Bucket DWC system. Or do like most growers do and just grow 2 or 3 large plants in one tank by selecting and keeping the more desirable three plants and disposing of the other three.
Growing the Stealth Hydro Way
The StealthHydro Bubbleponics System was designed to be "stealth" and to be very efficient, quiet, small, simple, easy to use, and inexpensive. The designer of this system had the beginner or novice in mind, because it is so simple and easy to use. But as we have continued to grow with the system and grow in experience, we've come to know you can not improve on it. The system is designed to grow six small plants very fast and easy, under the umbrella of two Dual Spectrum lights, in a two square foot space.
Dirty Water?
We hear from a few growers having trouble with the water becoming cloudy or brown. Upon asking questions, we learn they did not rinse the hydroton rocks as completely as they should have. You should put the hydroton rocks in a large mixing bowl full of water, and pour them through a colander five or six times until the water pours out crystal clear and clean of hydroton dust. You should also pour water over and through the rocks several times in the colander.
Algae Prevention
We also hear from a few growers allowing algae to grow in their tank and becoming a problem. This can happen from several mistakes but can easily be remedied. (see our 8 Step Remedy) You can not allow a dead root or fallen leaf to stay in the tank and decay. You can not allow the lights to shine into the water through the rocks. If the grow cup is full of rocks, the lights can not penetrate through the cups. And most important, you have to start with clean, pure water. You can not use rain water, or water from a stream, river or lake. You should exchange the water after the first ten days, and then every 10 to 14 days as you grow. As the plants get over 12 inches tall, exchanging the water every 7 days is more efficient. Your water should smell like clean green alfalfa sprouts. With added GROW nutrients, it has a slightly green tint. If you detect an unpleasant odor, you have waited too long to drain and exchange the water. When you do replenish the water and nutrients, you should look for and remove any dead roots that were accidentally torn from the plant. You can use chlorinated city tap water. Some growers even recommend it for it's purity. The chlorine dissipates fast and is never a problem. You can use RH filtered water, or store bought distilled or spring water. If you use well water or detect algae growing in your tank, you can add 1/4 to 1/6 teaspoon of Hydrogen Peroxide per gallon of water to your tank as a cure or preventative. Never use more than a level teaspoon per tank of 6 gallons of water.
We have seen books that advised allowing chlorinated water to first sit for 24 hours. Not only is this not necessary, this is bad advise, and encourages algae to start growing in your water. We have done tests and the chlorine dissipate within minutes from the tap. Do not use water that sat out and uncovered or was stored.
.
pH Problems
If you have a PH problem, you simply did something wrong. You should make sure that the PH of the water going into the tank is very close to 6.0. Anything between 5.8 and 6.8 is OK, but 5.8 to 6.0 works best. When you first set up your tank, you should do a PH test on your water before adding the water to the tank, using the enclosed PH test strips. Then adjust the water with PH UP or PH DOWN before it goes into the tank. That way, the PH perfect nutrients will work best. It can be dangerous to adjust the PH in the tank, especially if you overly adjust it. It is also dangerous to adjust it frequently. A very slight adjustment is OK, but if you change it drastically in the tank by using a large amount of PH UP or PH DOWN, you are taking a big risk of seriously harming your plants. If you do a test on your tank's water and it is extremely out of range from 5.8 to 6.8, then it is best to drain it and replenish it with PH corrected water and nutrients. (see the 8 Step Remedy) Let us repeat, you should add the nutrients to PH perfect water to start with. If you insist on adjusting it in the tank slightly, then use no more than 1/2 level teaspoon of PH UP or PH DOWN to the tank, and no more frequently than 4 hours apart. Plants do not adjust well to rapid changes in PH levels. The results can be Nutritional Lockout. Remember, if you make a mistake then you can easily and rapidly correct it, by using the 8 Step Remedy.
Mixing the Nutrients
We have had growers tell us "when I throw in a packet of nutrients into my tank, they just settle to the bottom and don't dissolve". That is not the proper way to introduce the nutrients and feed your plants. These nutrients are natural elements and not made to perfectly dissolve in water. For example, seashells are not ever going to completely dissolve in water, no matter how much they are pulverized, but are an excellent source of calcium. You should add the packets to a quart jar half full of warm water and stir them rapidly, mixing them as well as possible in the water. Then pour them through a tea strainer or some kind of mesh screen or filter, to filter out the small particles that did not dissolve. Then add the nutrient water mix to the tank.
Always remember when you first start and set up your system, you should start with 1/4 of a packet of GROW nutes, if you are starting with seeds, sprouts or baby seedlings. If you started with clones or baby plants, then start with half a packet of Grow nutes. Your plants should be about 3 inches tall, before you use the nutrients full strength. Then stand back and watch for a growth explosion!
Nutrient and Water Flow
We hear concerns from new growers that the water is not flowing rapidly or strongly from the ends of the tubes into the rockwool cubes. A strong flow is not necessary at all. A slight trickle (bubbling) is all that is needed to keep the rockwool cube moist and the baby roots fed until they reach into the deep water. You do need to check for crimps and folds in the water tubes, especially when you first set up your system.
Keeping It Simple
The biggest mistake that we have seen anyone make starts with "I wonder what will happen if I add miracle nutrients, or cat urine, or molasses" or a dozen other crazy things that we have heard growers try. If you do not know what will happen, don't try it unless you are prepared to start all over because you killed your plants. Experimentation is great, but caution and moderation are the keys to success.
Oxygen Is the Most Important Aspect of Bubbleponics
The best tip we can offer from experience is the importance of air or oxygen in the water. It is not required or necessary for good health of plants, but the addition of a 2nd air stone can make a difference in the speed of growth. You can use a plastic T-coupler so you can add a second stone to the one air pump. You can force growth spurts by draining the tank, waiting five or ten minutes to allow the roots to "air out" and then replenishing the water, even if you add back the same water and nutrient mix that you just drained out. Try it!
There are several ways to drain your tank by the way. One is by adding the drain plug or faucet. Or you can obtain a plastic hose like you can get at the aquarium store to drain your aquarium, and siphon the water out. Another way is to attach the hose to the submersible pump, using your fist as a coupling, and simply allow the pump to pump it out into a bucket.