end_of_the_tunnel
Well-Known Member
What you thinking of getting? What you doing with your Zeus?yer its hard work getting a response, i almost feel like a pest repeat sending the same email when im just wanting to buy something???
Guide me to the Light....
- Thread starter DukeFluke
- Start date
welight
Well-Known Member
grotbags
Well-Known Member
mark while you are about check your mail...
grotbags
Well-Known Member
i am wanting to build a light from thier new solstrip v2's, it will be a balls to the wall cutting edge masterpiece!.
the zeus was only ever a stop gap and when the solstrip build is done it will find a new home...
Thanks very much bud.
Will I get a tracking number? What service do you use? Back in work now so I'll need to know when to be in.
Nice one
Sorry don't think i was clear.
There are TWO lots of positive and negative coming from the driver.
Would I have to treat those as two separate outputs and run the full cable from each one to their respective light, or can I join them up and then split them nearer to the light.
I'm wanting to run one cable from the driver to the lights and then use the splitter/junction box there, so there's not a whole.run of cable to each light.
Am I making sense?
grotbags
Well-Known Member
yer makes sense, i would just use one of the driver outputs i cant see it being an issue. i think chilled is only using one output out of the two on their 600w light to feed all the bars.
i would try to keep the lenghts of the runs from the seperation as equal and as short as possible.
cobshopgrow
Well-Known Member
you have the 600w version with 2 wires for the dc side?
you can do as you want then as they join internally anyway.
check with a multimeter for continuity, you will see.
if it beeps you can treat them as one calbe.
why not join them?? when theyre there and ment to be used.
you can do as you want then as they join internally anyway.
check with a multimeter for continuity, you will see.
if it beeps you can treat them as one calbe.
why not join them?? when theyre there and ment to be used.
end_of_the_tunnel
Well-Known Member
The strips in your avatar look interesting. What was the mix in them, and were you happy with outcome, plant response and finish etc?
grotbags
Well-Known Member
yer thats fine
grotbags
Well-Known Member
they are the samsung h influx strips 10 x 5000k + 18 x 3000k on seperate channels then 630nm, 660nm, and 730nm all on seperate channels. yer love the light, better than the 400v 600w dimlux it replaced. plants seem to like it health and shape wise. havnt suffered from any defficiencys, also defo slightly quicker finish
What's the yield like compared to your dimlux?
grotbags
Well-Known Member
hmmm +30/40%?
dirtyoldb
Well-Known Member
Stunning
a work of art.Be nice to see a gallery with all the amazing builds these guys on here have posted.
Reminds me of the old comic book Roy of the Rovers. " Safest hands in soccer "
Got nothing but rich advice and have amazing builds from top guys on here.
Lovely
I must admit, it does seem like someone on the admin/shipping side of things would make a huge difference. Even just to answer mails and give updatesyer its hard work getting a response, i almost feel like a pest repeat sending the same email when im just wanting to buy something???
FluffsTravels
Well-Known Member
What was your yield under the Dimlux 1000w DE to get perspective on that yield increase? Same size growing area? How many watts replaced the Dimlux? Thanks