Harvest a Pound Every Three Weeks!

OregonMeds

Well-Known Member
I didn't realize that he used my photos! That's fucked up!

That's copyright infringement! It's a Federal offense.

He's going to be fucked when the High Times article comes out soon. Those are some of the photos I sent them for the article.

When they use them in the article then he could face criminal charges for stealing the photos from them. They have the law on their side too.

Check this out. He can get into more trouble stealing photos than he can growing pot!

Can we report him to Ebay and point out that he stole the photos from this site?

If the person copied the photo and put it up on ebay they'll pull his ad. If he is linking to the photo on here all you need to do is have a mod change the photo he's linking to into some of the nastiest porn you can think of but with the same file name.. That screws with them, and will get the thing closed too.

 

OregonMeds

Well-Known Member
sure do!
i think they are also thicker then the EZ-clone 2" ones
saw a DIY collars made out of a pool noodle
this allows for any thickness one wishes for
i think 3" should do the work
any thoughts?


Any thoughts? Yea, I think I need to drive to the store for some sausage, crackers, and cheese cause I really have the munchies now.
 

SOG

Well-Known Member
My thought is that I hope someone didn't get caught by the wife using the good knife to cut pool noodles, lol.

I could go with slicing and drilling, but using the knife to shape those things is is too much...I'd just buy them.
lol, i have to agree with you on that ;)
the guy was building a DIY bubbler without any baskets
he is using them in a way so they hold over the top lid
(updated images above)
 

havefungodumb

Well-Known Member
I didn't realize that he used my photos! That's fucked up!

That's copyright infringement! It's a Federal offense.

He's going to be fucked when the High Times article comes out soon. Those are some of the photos I sent them for the article.

When they use them in the article then he could face criminal charges for stealing the photos from them. They have the law on their side too.

Check this out. He can get into more trouble stealing photos than he can growing pot!

Can we report him to Ebay and point out that he stole the photos from this site?
hes not making much at all,

where im at to buy parts it was pretty exspensive for pvc and 40$ for pvc fence post as to why i didnt get it, actually cost me alot,

ppls here said they got stuff for alot cheaper,

that guy sellin that with pics man that funny,

u know u a pro when stink lol...

forget that punk
 

dragonbud

Well-Known Member
I noticed the system on e-bay was using a really small pump. I bet it's a piece of crap pump that dies super quick. I would be surprised if it has enough pressure to make the sprayers work. What's too bad is some guy is going to slam that system together and that person won't take the time to put "fit and finish" touches that the fine stinkbud system has (your pictures are proof). I personally spent a good half hour just smoothing out the rough edges on my 2" holes on the fence posts. Think of all the rough edges that e-bay piece of crap will have, all the bits of pvc floating in the water, getting sucked up into the pump, icky... If you want to do something right you have to do it yourself. The person who is trying to profit from the fruits of your labor could care less if the system works.
 

whysohigh

Well-Known Member
well i shot a message to the guy on ebay selling stinks design, heres his response;

"And?"

also heres his new cloner if thats what you want to call it

http://cgi.ebay.com/6-Plant-AEROPONIC-SYSTEM_W0QQitemZ170299579492QQcmdZViewItemQQptZHydroponics_Seed_Starting?hash=item170299579492&_trksid=p3911.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318

everyone should blow up this guys inbox, maybe hell get sick of 80 RIU hate mail messages a day, here he is, just click 'contact member'
http://myworld.ebay.com/ebaymotors/jalmer6?ssPageName=ADME:X:RTQ:MOTORS:1181

edit-- my bad hes on here also https://www.rollitup.org/members/jalmer6.html

im pretty sure you have to have an account to mail him tho. what a little shit head.
 

Skeksis

Well-Known Member
If the person copied the photo and put it up on ebay they'll pull his ad. If he is linking to the photo on here all you need to do is have a mod change the photo he's linking to into some of the nastiest porn you can think of but with the same file name.. That screws with them, and will get the thing closed too.

I like this idea... kind of reminds me of how "Goatse" got started. LOL
 

jem

Active Member
het stink the guy that stole your design and is profiting off it i blew his inbox up for you also i will tell all the bidders to go to your sight to build it themselves to screw with that asshole. I got a question i just bought a pocket microscope with built in light. It goes from 60x to 100x i cant see the buds at all is that because 60x is to much i focused and everthing please help
 

SOG

Well-Known Member
het stink the guy that stole your design and is profiting off it i blew his inbox up for you also i will tell all the bidders to go to your sight to build it themselves to screw with that asshole. I got a question i just bought a pocket microscope with built in light. It goes from 60x to 100x i cant see the buds at all is that because 60x is to much i focused and everthing please help
60x - 100x is a lot of magnifying, couldn't see a thing myself the first time i used it!
try it first with a simple item until you get comfortable with the magnifying action
stick a bud right into the end of the scope(so it doesn't move),
pull the top lens all the way out, then use the zoom gently while keeping your eyes focused
 

andyman

Well-Known Member
well i shot a message to the guy on ebay selling stinks design, heres his response;

"And?"

also heres his new cloner if thats what you want to call it

http://cgi.ebay.com/6-Plant-AEROPONIC-SYSTEM_W0QQitemZ170299579492QQcmdZViewItemQQptZHydroponics_Seed_Starting?hash=item170299579492&_trksid=p3911.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318

everyone should blow up this guys inbox, maybe hell get sick of 80 RIU hate mail messages a day, here he is, just click 'contact member'
http://myworld.ebay.com/ebaymotors/jalmer6?ssPageName=ADME:X:RTQ:MOTORS:1181

edit-- my bad hes on here also https://www.rollitup.org/members/jalmer6.html

im pretty sure you have to have an account to mail him tho. what a little shit head.
I cant belive he didnt even change his name from riu to ebay.:finger: You would have at least thought that. His system says complete too no timer for the pumps bet that doesnt grow "complete" buds lol:bigjoint:
 

andyman

Well-Known Member
I would give him heck on ebay but them he would know my name. cause you have to have an account to send shit. karma will get him in the long run so no one should really worry about it. That kinda karma will probly be 10x as bad as just regular karma. lol
 

torrey420

Well-Known Member
Wow, I had quite the little glitch this morning.

I went in my flower room to check on things and noticed that one of the units had started leaking and after further investigation I found that there was so much root mass from my giant plant that it had stopped the drainage and effectivly damned up the post. So i had to get my mmcguyver hat on and finally decided to make a stent so to speak with some 1/4" copper tubing, pushed it through an wha la drainage! So dont veg your seedlings too long! I think the one plant could produce 3-4 ounces on its own!

One other tradgedy happened while I was sleeping as well, the tie down on the main stem of the above monster broke and I came in to see the main cola right up against the lense of the reflector, doh! It was only slighty scorched so hopefully it will recover. Quite the happening today!
 

andyman

Well-Known Member
Wow, I had quite the little glitch this morning.

I went in my flower room to check on things and noticed that one of the units had started leaking and after further investigation I found that there was so much root mass from my giant plant that it had stopped the drainage and effectivly damned up the post. So i had to get my mmcguyver hat on and finally decided to make a stent so to speak with some 1/4" copper tubing, pushed it through an wha la drainage! So dont veg your seedlings too long! I think the one plant could produce 3-4 ounces on its own!

One other tradgedy happened while I was sleeping as well, the tie down on the main stem of the above monster broke and I came in to see the main cola right up against the lense of the reflector, doh! It was only slighty scorched so hopefully it will recover. Quite the happening today!
dude that sucks. what size post are you running. hope it works out for ya:bigjoint:
 

YaK

just some guy
Wow, I had quite the little glitch this morning.

I went in my flower room to check on things and noticed that one of the units had started leaking and after further investigation I found that there was so much root mass from my giant plant that it had stopped the drainage and effectivly damned up the post. So i had to get my mmcguyver hat on and finally decided to make a stent so to speak with some 1/4" copper tubing, pushed it through an wha la drainage! So dont veg your seedlings too long! I think the one plant could produce 3-4 ounces on its own!

One other tradgedy happened while I was sleeping as well, the tie down on the main stem of the above monster broke and I came in to see the main cola right up against the lense of the reflector, doh! It was only slighty scorched so hopefully it will recover. Quite the happening today!
I think you should take the copper out! a stint type situation is a good idea, but please do not use copper, I heard that it leaches into your nutrient soup. could be detrimental. Hopefully someone who knows for sure will chime in and set the record straight.

I was going to make a chiller from one of those small dorm fridges once, and did a post about it, I heard from more than one person that copper lines were a big "no-no" because they leached into the soup.

maybe use plastic or vinyl or something else?

hope it works out for you.:leaf:
 

LionsRoor

Well-Known Member
I think you should take the copper out! a stint type situation is a good idea, but please do not use copper, I heard that it leaches into your nutrient soup. could be detrimental. Hopefully someone who knows for sure will chime in and set the record straight.

I was going to make a chiller from one of those small dorm fridges once, and did a post about it, I heard from more than one person that copper lines were a big "no-no" because they leached into the soup.

maybe use plastic or vinyl or something else?

hope it works out for you.:leaf:
Yeah - I have heard that too about the copper being bad. It is documented in Ed Rosenthal's classic, "Marijuana Success Indoors, Garden Tours and Tips". A grower in the book cooked a whole crop making a chiller out of copper fridge parts... it's enough to keep me from using ANY copper in a grow. The salts in the nutrients leach the copper - small levels of copper are OK and actually beneficial - 'high levels of copper are extremely toxic even in minor excess'.

Perhaps using the copper as a short term solution (as it sounds like this is)...
 

LionsRoor

Well-Known Member
Wow, I had quite the little glitch this morning.

I went in my flower room to check on things and noticed that one of the units had started leaking and after further investigation I found that there was so much root mass from my giant plant that it had stopped the drainage and effectivly damned up the post. So i had to get my mmcguyver hat on and finally decided to make a stent so to speak with some 1/4" copper tubing, pushed it through an wha la drainage! So dont veg your seedlings too long! I think the one plant could produce 3-4 ounces on its own!

One other tradgedy happened while I was sleeping as well, the tie down on the main stem of the above monster broke and I came in to see the main cola right up against the lense of the reflector, doh! It was only slighty scorched so hopefully it will recover. Quite the happening today!
Bummer, Bro - but it sounds like you have it in control... I know the feeling... sometimes it feels like you need to live in your garden! I've seen some crazy things happen in a matter of hours - these babies are alive! They will run amok if you let em! ha ha

I made a quick reply to your copper tubing... I think you will be OK short term, but copper tubing has caused problems for others in the past. As there are many alternatives, I would use one to be safe! Just my humble opinion from things I have read. I was scared enough to never use it so, I have no first hand experience! Having said that, I have seen others utilize copper with no ill effect.

Sounds like you know pipes as well as the rest of us! (pun intended!)
 

LionsRoor

Well-Known Member
Dam! I can't make them much cheaper than that myself! That's a great deal!

It costs me about $80 in parts to build a system myself. I don't see how he can make much of a profit.

It costs about $100 to ship one of my systems. The container alone is $45 because of it's size. He's going to lose his ass when he tries to ship the system for free.

I'm glad with the economy the way it is I can help people in ways I hadn't even thought of. It's nice to help put some food on the table for one of us StinkBuddies. I hope this guy starts charging for shipping so he dosen't starve!

It's also a little risky if you ask me. Now everyone on the internet knows where his grow is. I hope he's not growing any weed in the back room!
Wow! Enterprising - but didn't really think it out, huh? I wanted to sell your systems too, Stink! ha ha - but true. I was going to contact you with details and see if you wanted to start a company... I wanted to do ALL the work and split (50/50)the profit with you! You think I'm shittin' but I am serious.

Imagine fabricating a couple key parts - just to polish up the systems a bit - and going head to head with Botanicare and GH!

The best ideas are often copied. You rock, Stink. Thanks for making it so easy for us to copy you!
 

torrey420

Well-Known Member
Well, the copper is out, cut a piece of 1/2" pvc and managed to get that in the post through a non used netpot hole.
 
Top