Harvest a Pound Every Three Weeks!

StinkBud

Well-Known Member
Hey there Stink...hows it going my friend? Man im lovin my new dabney blueberry,,its still has 4 weeks to go and its already packin on huge colas!

I had a quick question; when you hook your AC unit up to your controller, do you un plug the exhaust? I notice the outlet on the controller is for either ac or exhaust.
I was just talking to my friend about installing my A/C and more power.

I'll use the thermostat on the A/C and just leave it on 86. I'll keep my exhaust fan connected to my controller. I set it high enough that it will only come on in an emergency.
Another question i had was how much bottom trimming do you do to get such big colas?

I trim the bottom branches.... but i just cant get myself to do to much...and i think if i trimmed more ..my buds would be even bigger. what is your process?
I pull all the bottom leaves and small stems off when I take them into the flower room. I haven't had much popcorn buds lately with 3-1000W lights. The light really penetrates everywhere now.

After 3 weeks I harvest and pull the old system out. This gives me enough room to work. I pull any dead or dying leaves off. I also finish tying up the branches to the supports.

You're going to love the taste of Blueberry. Still my favorite after all these years.
 

StinkBud

Well-Known Member
Hello everyone!

ok i got my mind set on following stinkbud's system...

I actually have already started and right now its the 3rd day into my project... i was wondering should i start a new thread posting pictures day by day on my project or just post here?
Personally I love to see everyone's photos. In fact I'm more proud of some of the StinkBuddies grows than my own. I feel like a proud father when I see everyone's success:lol:.

Some of the guys like Dirthawker have started there own thread. Having your own thread is cool because you can post a lot of your own knowledge and experiences that may have nothing to do with this thread.
 

StinkBud

Well-Known Member
stink here are pics at end of week 6 beginning of 7 started from seed and vegged to long, I have 3 systems, and I had to use two of the systems to hold about 10 total plants, they are huge.

Anyways I am getting anxious to start my flush, let me know where I am at. I think I am about ready and would like to start now if you think they look ready

btw my ppm where upto 3500 at week 5 my meter only went to 2000 so I winged it, well that is where they burnt a little and I have just beed adding water to that since, I am at about 1800 ppm now.

Flush now or wait a week?

Also i super cropped everyone of these plants, lots of colas and all huge bushes

strains are white widow, burmese x fucking incredible, top 44 and sweet tooth

Thanks a bunch
Nice bro! All of them look ready to flush except one. My guess is it's the WW? Anyway the others are all ready.

Try this method of flushing. Drain and refill your res with plain water. Let the pump run constantly for 3-4 hours. Now drain the res and refill with water and 450ml of Clearex. Let that run overnight on the normal timer.

Drain and fill your res with water and add 450ml of Sweet. PH the water and let her go for a week. All you have to do is keep the res filled at this point.

When the leaves turn yellow and the trichromes start turning amber you are ready for harvest.

You're going to be stoked with the taste bro!!!
 

LionsRoor

Well-Known Member
LOL... I'm gonna get a couple of these... Thanks :leaf:

GC Hydro has a location about an hour away from me. They are a pretty good store. I didn't like that they won't honor advertised web prices when you walk in... Maybe that is industry wide, but its a new thing for me to comprehend.

The guy that helped me there liked cars & my car so we got along great.. He went to bat for me and got me a good price on the grocheck meter 8-)
Yeah - you gotta wrestle with em on that one... they usually honor the web price with shipping... start there and work down if you can. I hate that - but everybody is trying to make a living... getting to put your hands on something before buying it is also nice. If you frequent a shop, the deals will get even better and they start to kick you down sample nutes, t-shirts and other stuff... My local shop let me BORROW a light one time when I had an issue... you don't get service like that on the web.

Cars, cars, cars... you bonded!

Glad to hear you worked at a reasonable deal. Can't wait to see 'em in action!
 

LionsRoor

Well-Known Member
I enjoy Remo! Sure he is a little over the top, but nobody else is putting out information like he does so I give him a wide latitude. In my book, he is far from being a fruit, I think Remo has shown more guts and determination than 99.99% of the growers out there. I suspect that Remo has had to stand up to some pretty powerful forces to keep his show going at no small amount of risk to himself. If anyone wants to check him out here is the website:

http://www.urbangrower.com/
Yeah - he rocks! Just like Stink - the proof is in the pudding!
 

Delusional

Well-Known Member
If you bought the fence post online can someone post the website... i been searching for hours
I cannot see shipping something like this..... Any home depot or lowes has these, especially this time of year. I found mine at home depot in sections a bit over 8'. I just measured two 4' sections out of each, cut, done. They were $22 per 8'+ length, only needed three for the complete flowering units.
 

thecholochef

Well-Known Member
Whats up Stinkbuddies, so this is something that was mentioned a few hundred pages back.. I started a thread for all of us stinkbuddies to pretty much exchange notes on the strains we're running. which ones work/dont work w this system and what not.. so here it is.

https://www.rollitup.org/hydroponics-aeroponics/185435-stinkbud-method-strain-compatability-guide.html#post2394539

Pretty soon we will have a ton of strains dialed in and we are all using the same system.. how sweet would it be to be able to pull up a list and see all the info we need.


Chef :joint:
 

SoCoMMJ

Well-Known Member
I cannot see shipping something like this..... Any home depot or lowes has these, especially this time of year. I found mine at home depot in sections a bit over 8'. I just measured two 4' sections out of each, cut, done. They were $22 per 8'+ length, only needed three for the complete flowering units.
Not a single Lowes or Home depot has the 4" posts anywhere in Colorado. I actually got them pretty cheap including the shipping from NY.

I got 8 5 footers to build my "Stinkbud Max" units. Eight - 4" x 4" x 5foot and 16 end caps shipped to Colorado for 140 total. That works out to 17.50 each and 16 free caps :weed:

Email this guy with what you want and he'll do better than his ebay rates. [email protected]

Or just call him...
Chris Vanderlay

Boundary Fence & Railing Systems Inc.
131-02 Jamaica Avenue
Richmond Hill, NY 11418

www.BoundaryFence.net
www.BuyVinylFence.com
www.BuyAluminumFence.com
www.BuyChainLinkFence.com
www.FenceSlat.com

1-800-628-8928

There ya go fence post guy... free plug for giving the stinkbuddies the hookup. :blsmoke:
 

Jagermaster

Active Member
Where in Washington is the Cannabis Cup being held?
I won't find out until later tonight. Secret squirrel shit, I guess. I'll give an update tomorrow night. If I remember.


Which reminds me, if you could choose any strain in the world and it was available, what would it be? They sell clones and feminized seeds at this event (technically they are "given" away with a "donation")

Any suggestions?
 

Scuba

Well-Known Member
Dude that sux you can't find that post, it took me days and alot of driving looking for it. I just finished my system a few days ago. Breaking the cherry on my new system as I type. Fix most of the leaks and works beautifuly. The only thing that pissed me off is a good cycle timer is 80- 200 bucks
 
Top