Harvest a Pound Every Three Weeks!

hehehemann

Well-Known Member
There are to many pages to read so my question may have been answered but i am curious as to how i can go about starting seed growth in a setup like this. I dont have access to clones so seeds are my only choice. what can i use/do to have a successful grow. Thanks

You can start the seed off the usual way and just transfer them. Use rockwool and then like dok does, just put the rockwool in the net pot.
 
StinkBud, i've been away for a while from this site and just wanted to say THANKS again for all your knowledge and the passing on of all your good work! Had 2 questions. I remember a long while back you mentioned something about building an "aero-bucket" setup. I was curious of how you would construct that? Any ideas of how one would incorporate the "aero-bucket" or your aero setup into a vertical growing style? I love your aero setup and vertical setups and would love to be able to combine the both! THANKS again for everything!
 

GringoLoco

Well-Known Member
There are to many pages to read so my question may have been answered but i am curious as to how i can go about starting seed growth in a setup like this. I dont have access to clones so seeds are my only choice. what can i use/do to have a successful grow. Thanks
An easy way to start seeds in the Stink cloner, is to place a few seeds in a paper towel bunched up and into a net pot, cover with a neoprene coller, and place in cloner. After 2-3 days roots should be a popping, and after 5-7 days they should be seedlings long enough to place in a collar and it's own cup.

Hope this helps.
 

oneeyejedi

Active Member
StinkBud, i've been away for a while from this site and just wanted to say THANKS again for all your knowledge and the passing on of all your good work! Had 2 questions. I remember a long while back you mentioned something about building an "aero-bucket" setup. I was curious of how you would construct that? Any ideas of how one would incorporate the "aero-bucket" or your aero setup into a vertical growing style? I love your aero setup and vertical setups and would love to be able to combine the both! THANKS again for everything!
hey bro not sure if you know about this yet here ya go
http://www.stinkbuddies.com/
 

BIGTIMEROOFERR

Well-Known Member
An easy way to start seeds in the Stink cloner, is to place a few seeds in a paper towel bunched up and into a net pot, cover with a neoprene coller, and place in cloner. After 2-3 days roots should be a popping, and after 5-7 days they should be seedlings long enough to place in a collar and it's own cup.

Hope this helps.
i have 100% suc. this way
thanks to gringo
 

oneeyejedi

Active Member
OK I need some advice. I'm setting a new room and I cant make up my mind on what controller or controllers to use.
I'm running
growzilla x 2 with 1000w hps and 400w mh in each I'm wiring 240 for the lights
4 stinkbud flower systems
hydrofarm co2 regulator will upgrade to burner after first run
ac
carbon scrubber w 8in high output can fan recirculating inside room
6in ho can fan venting sealed lights
its really dry here so don't know what my humidity needs will be but I'm thinking ill have to raise hum in room.its like 12 percent right now empty.
 

morphus657

Active Member
Ok i just got done reading all this it took me like 2 weeks but well worth it Thanx u so much for all the help Stinkbud i read your HT artical 2 it was really good and i hope all is will with u and your work
 

whysohigh

Well-Known Member
An easy way to start seeds in the Stink cloner, is to place a few seeds in a paper towel bunched up and into a net pot, cover with a neoprene coller, and place in cloner. After 2-3 days roots should be a popping, and after 5-7 days they should be seedlings long enough to place in a collar and it's own cup.

Hope this helps.
i found the paper towel gets too soggy after a few days, but some gauze works really good in the cloner.
 

GringoLoco

Well-Known Member
I guess the paper towels my wife buys are better quality, I've kept them in the cloner for many days checking several times daily without a tear or deterioration of any sort, but gauze seems like a perfect alternative.
 

mtx

Active Member
Whats the length and width of the 14 site and rubbermaid, was wondering if I could fit two 14 systems in a 4x4 tent with a 600W
 

mindphuk

Well-Known Member
Whats the length and width of the 14 site and rubbermaid, was wondering if I could fit two 14 systems in a 4x4 tent with a 600W
Length and width are identical to the 18g size, just shorter. You can easily put 2 in a 4x4 tent.
 

dagobaker

Well-Known Member
Length and width are identical to the 18g size, just shorter. You can easily put 2 in a 4x4 tent.
i just built a tough box version (the yellow and black ones from home depot 27 gallons) with 2 of the double units as a sog style flowering grow
they fit perfectly in my 39 x 39 inch box under a 400 hps......and i have a co2 generator in the room
 

SuicidalGuy

Active Member
i just built a tough box version (the yellow and black ones from home depot 27 gallons) with 2 of the double units as a sog style flowering grow
they fit perfectly in my 39 x 39 inch box under a 400 hps......and i have a co2 generator in the room
Dago thats cuz youre the man!
 

Shrike

Well-Known Member
Hey Dago,

Let's see a few pic's of your SoG style setup. SoG himself is only now starting to get the grow going, but he did build that uber room and that took a lot of work and money. Let us know how his (and now your) mod of the stinksystem work and look.

i just built a tough box version (the yellow and black ones from home depot 27 gallons) with 2 of the double units as a sog style flowering grow
they fit perfectly in my 39 x 39 inch box under a 400 hps......and i have a co2 generator in the room
 
Top