Remember that small 6 hole unit I built as an experiment? Check out how it is doing.
I may have to draw up some plans...
that looks awesome, please if you get time post plans for this setup.
Remember that small 6 hole unit I built as an experiment? Check out how it is doing.
I may have to draw up some plans...
Hey Stinkbud and other experts, what do you use to adjust your PH levels? I have a solution now that really raises the ppm when I use it.
I think he was referring to which pH up/pH down products are we using... Maybe SB uses pure organic pH modifiers? I use products similar to these with no problems whatsoever!~5.6
I believe anywhere between 5.2-5.8 will do fine.
the roots all grow together and eventually form a 1/4 inch mat that runs the length of the post...all the plants get all the nutes they could possibly need.OK - One more question. It's not to sound critical in anyway, you know a hell of a lot more about than I do, but the engineer in me likes to over analyze everything.
You've got your 4x4 fence post say at a 2% downgrade with 6 pot holes in it. Between each hole you have a sprayer, 5 in total. Pot 1 and 6 are only getting sprayed from the one side whereas pots 2, 3, 4, and 5 are getting sprayed from both sides. In addition, the film coming from the sprayer runoff increases with each sprayer going downhill. That is, pot 1 is not getting any runoff, pot 2 is getting runoff from one sprayer, pot 3 is getting runoff from two sprayers and so on.
Are these assumptions correct and does it even matter? Do plants closest to the reservoir grow taller or faster than the plants on the other end?
Thanks again.
The plants get all the nutes, O2 and water they could ever use. Light and CO2 are your limiting factors.OK - One more question. It's not to sound critical in anyway, you know a hell of a lot more about than I do, but the engineer in me likes to over analyze everything.
You've got your 4x4 fence post say at a 2% downgrade with 6 pot holes in it. Between each hole you have a sprayer, 5 in total. Pot 1 and 6 are only getting sprayed from the one side whereas pots 2, 3, 4, and 5 are getting sprayed from both sides. In addition, the film coming from the sprayer runoff increases with each sprayer going downhill. That is, pot 1 is not getting any runoff, pot 2 is getting runoff from one sprayer, pot 3 is getting runoff from two sprayers and so on.
Are these assumptions correct and does it even matter? Do plants closest to the reservoir grow taller or faster than the plants on the other end?
Thanks again.
I run my PH at approx. 5.8.Yesterday 01:58 PMtorrey420Hey Stinkbud and other experts, what do you use to adjust your PH levels?
I have a solution now that really raises the ppm when I use it. I believe stink said he just uses GH ph up and down not any fancy organic ph up
sorry I don't know how to quote a previous message
Stink has to keep his plants under 12" because of the state law, he is a licensed grower.HEY stink how r u doing just wanted to say thanx for making this thread it realy help me out alot!!!!! stink wut if i veg the plants a little longer than 3 weeks will the your system get to crowded just looking for maxium yield!! but if 12 is best then i wont even think of veg longer than 3!!!!!!
kiss-ass
Stink: Why don't you use an air pump/stone to oxygenate your reservoirs?
Also with a cycle timer the plants are setting in air for 5 minutes at a time. Can't get more oxygenated than that!With all that spraying going on in the fence post, that water is picking up more O2 from the air in the spray that it won't need an air stone in the res.
That will oxygenate the water better then the air stone will, IMO
Good Luck with your grow!
These vegged for a month. I just switched the light to 12/12HEY stink how r u doing just wanted to say thanx for making this thread it realy help me out alot!!!!! stink wut if i veg the plants a little longer than 3 weeks will the your system get to crowded just looking for maxium yield!! but if 12 is best then i wont even think of veg longer than 3!!!!!!
It works well for me because some of my strains are slow starting. Blueberry is my favorite but it is not a big producer. Leaving it in veg allows it to get big enough to produce like my other strains.Hey im thinking that maybe for now on i will only take the exact # of cuttings (14) every 3 weeks.
With 100% success rate with the cuttings i wouldnt need to take anymore, and wouldnt need to hold any back. ( creating different size plants) what do ya think stink? maybe take just a couple extra to be safe?
I think beacuse my setup (veg and clones under 24/7 light) thay are growing very quick, my latest veg plants are now 1ft high and its only been 10 days..lol
In fact the Blueberry strain I'm growing has been passed around here for over 25+ years with no change what so ever.Speaking of taking cuttings, do any of you guys who have been doing this awhile noticed any sort of "evaluationary" effect? That is, you take cuttings from the best one or two plants and start a whole new crop. From the new crop you take cuttings from the best one or two plants and so on. Not up to that point myself yet, just wondering.