robotninja
Well-Known Member
Hey stink, do you have build instuctions for the veg unit? Wondering how you did the plumbing from the top container to the bottom.
And where did you get your pumps from?
And where did you get your pumps from?
Hey stink, do you have build instuctions for the veg unit? Wondering how you did the plumbing from the top container to the bottom.
And where did you get your pumps from?
They may not root as fast but they should stay green and happy.Just made my cloner monday and it seems to be working good. Hey stinkbud any problems with the cloner being too cold? As it is below 30f here in Ohio. Would I need to add a fishtank heater to regulate it to keep it in the upper 60's F. cause its staying between 60-65 in my house when its 68-70F ambient room temp in my kitchen.
thanks for all the help everyone
You would be better off with a cloner and the Aero/NFT system though.cool shit read alot of your thread. I want to just use either your clone or veg system to grow to flowering. Can i flower without using two bins like your veg setup. also how many plants can i do in a 32 gallon rubermaid container. i grow in soil but i want to try your setup. what spacing should i use between plant from veg to flowering
You should build the system around your room. Maybe 2 long posts draining into a center res. Or 3 long single post systems with the res running lengthwise.Can someone tell me (perhaps from the plans) what the max width is of the regular flowering setup given by stink. My friend pedro's grow cab is about 5ft long by 25" wide is that wide enough?
Do a search for EcoPlus 396...Where are you guys seeing these magnetic pumps for 20 bucks? Not at my local shop thats for sure.....only deals I seen that even come close to 20 bucks is used crap on ebay........
Something is wrong here. It's impossible to diagnose the problem without actually seeing it but my 400gph pump will shoot water way over the top of the lid if I don't have it on. If I remove one netpot there is water spraying out of the hole. I can try to list possible causes of your issue but as I said before it's gonna be hard without actually seeing it. If anyone saw it in operation they'd probably see right away what the issue is.Got a question, how high should the water be spraying under the lid of your veg and cloner? Because my sprayers don't reach the net pots. They reach like 2-3 inches below the bottom of my pots. How can my clones root if the water never hits em?
I got that 390+ pump so it's powerfull enough. However I wasn't able to get those Ez-Clone sprayers, instead I got the crappy red 360 ones from home depot, the ones with little tiny holes that clog easy. Are my sprayers the problem? I built it to specifications otherwise.
Also I just have the pump sitting inside the pvc with no seal, is that my pressure problem? How can I seal the pump to the pvc without using cement/silicon?
Sorry I think we may have mis understood each otherYou should build the system around your room. Maybe 2 long posts draining into a center res. Or 3 long single post systems with the res running lengthwise.
My room is 7x8. I have virtually no room to work. It sucks. That's why the single long post might be better.
You might also be better off with 6 or 8 -400W lights instead of 4-600s
Sorry I think we may have mis understood each other
I really just have a small closet / cab style grow which is 5 feet long and 25 inches wide, Can anyone who has built the standard flower system(2 x 4 foot posts and res + framework) tell me if it will fit width wise within 25 inches with enough room for the plants to grow successfully?
Also Stink what is the end cost per pound(not what you sell or distribute it for to your patients)?