Hash clasification question

charface

Well-Known Member
Never understood the terminology.
More importantly what would my stuff be called with these properties?
At room temp if I squeeze the lump I can squeeze it but it is very hard.
If I were to throw it on the floor it would shatter.
when I smoke it. It boils.
When it is in a solid ball it is black but when heated and pulled apart it is transparent.


This is the iso I didn't let sit long enough and ended up having to get rid of excess iso
with slow heat. The high starts and then just keeps coming and lasts a very long time.

Ended up with 4.7g from the initial run and then I used the same material and got
2.6g of nasty green shit that still gets you pretty high. This batch I shook.

Sorry for the newbieness just wondering if it would simply be called iso hash or what.
The batch I made a while back stayed gooey at room temp and this does not.
 

Indagrow

Well-Known Member
It just depends on the method if you used iso its iso hash if you use butane it's bho if you use virgins running through your fields then clearly you are a boss
 
sounds like honey oil, its most commonly made with butane (don't do this indoors or anywhere near a flame or spark), or iso alcohol. I don't like ether of these methods to much because of the chance of leaving some residue (from butane or iso) and that fucks with the taste/ quality. more recently I've seen it made with CO2, this has the added benefit of the CO2 being easier to dissipate into the environment leaving your hash a lot cleaner burning and much better tasting.
 

oilmkr420

Active Member
well it really sounds strange. I make co2 concentrates and use every co-solvent there is. The best batches in terms of color pleasing the eye, preserving the taste, and having high yields require a formula of very precise numbers. The gas' to look for should be hexane, ethanol, isobutane, and propane or butane. The mix should be weighed and solvents added after the pot meets dry ice in the vessel. Put the alcohol in first, butane then propane if desired and quickly thread on your valve and transfer co2 from a tank your extraction vessel w a check valve. Leaves an oil really hard to beat in all aspects. Just look @ my dinner plate in my avatar.
 
Top