Heat stress or light stress
- Thread starter Tslim403
- Start date
Hugo Phurst
Well-Known Member
I'd say light stress, to me you have what looks like the beginning of foxtailing, and not the good type.
Easy way to set minimum distance for heat.
Put your hand under the light till it gets uncomfortably hot, then slowly move your hand away until it's a comfortable warm, that's min distance.
Good luck
Easy way to set minimum distance for heat.
Put your hand under the light till it gets uncomfortably hot, then slowly move your hand away until it's a comfortable warm, that's min distance.
Good luck
StareCase
Well-Known Member
Light stress … based on the pretty intense cupping of the leaves. They are not the same thing.
What lights are you using and how far above the canopy are they?
Your extraction fan should be going 24x7 as a best practice. My very first crop went sour because I did not have to fan going continually and they became the victim of the dreaded powdery mildew. I've got the fan going at a little above 50% but it is going 24x7. Exchanges the air and does reduce the internal tent temperature.
What lights are you using and how far above the canopy are they?
Your extraction fan should be going 24x7 as a best practice. My very first crop went sour because I did not have to fan going continually and they became the victim of the dreaded powdery mildew. I've got the fan going at a little above 50% but it is going 24x7. Exchanges the air and does reduce the internal tent temperature.
DjBakedBagel
Member
I dont think that's light stress...looks like heat stress.. and like starecase said your exhaust system should be running full time included intake...
Tslim403
Member
I got a 2000w phlizon Cree COB LED light on one side, and then I have 7 bars of 48Watts each LED bars from quickgrow.com there the QG LEDS and there about a foot off the canopy and the Philzon is like 2 feet.
I've added another fan so there is 3 small ones and 1 large fan and I turned my extraction fan on full-time now and I just jacked my lights up.
I'll post a picture when the lights go on in the morning but I have an Auto flower beside this strain and it doesn't seam to have the same signs of stress
I've added another fan so there is 3 small ones and 1 large fan and I turned my extraction fan on full-time now and I just jacked my lights up.
I'll post a picture when the lights go on in the morning but I have an Auto flower beside this strain and it doesn't seam to have the same signs of stress
Tslim403
Member
These plants that are showing heat stress are both in hydroponics and then there is an Auto flower in soil beside the 2 showing heat stress, that is not showing heat stress.
So that led me to think that possibility of it bring a deficiency of mag or something or to low humidity? I'm not sure why if it's heat stress why the one doesn't show any signs of heat stress. Or is that strictly happening because it's in soil and can withstand the higher atmospheric temperature?
So that led me to think that possibility of it bring a deficiency of mag or something or to low humidity? I'm not sure why if it's heat stress why the one doesn't show any signs of heat stress. Or is that strictly happening because it's in soil and can withstand the higher atmospheric temperature?
Attachments
Sleazyb
Well-Known Member
Your girls turned out nice man. Don't over think it. Those are some nice frosty nugs. Different plants do different things. I'd say your t3mps are a little high at canopy. Raise your lights a little next run but plants from seed will never all be 100 percent equally as healthy. And never compare autos to photos . you will learn the hard way
Tslim403
Member
Yea I have the Ultimate ones for the QG's 4 foot bars and 8 bars on the rack. They are great lights, and I mean great. They only do half my 5x5 tho. They don't have a lot of coverage but the canopy penetration is amazing. My buds are like tops all the way down.
I'll be getting rid of the Cree COB in another tent cuz it runs to hot and getting another 4 foot section of QG's of 8 bars.
I'll be getting rid of the Cree COB in another tent cuz it runs to hot and getting another 4 foot section of QG's of 8 bars.
myke
Well-Known Member
How close together do you have them?
myke
Well-Known Member
yes,I see you have 8 in 4ft so 6" apart I assume.
Tslim403
Member
No right now there is 7 I have them beside a phlizon Cree COB LED light nut that one fried my buds it's to hot so it's taking that one and using it for a 4x4 tent on its own, I think if it's at the roof it will do the whole tent. And I just purchased 3 more QG 's for a total of 10 but I think I'll put 5 on one side and 5 on the other with something blurple in the middle or I might go for a rack of 8 and 8 and have 16 in the one tent.
Here are some pictures of my existing lights and the rack I just got with the 3 new QG 's .
The boxes are new lights and the silver racks are the new ones I just got not sure if I like them compared to the old rack.
Here are some pictures of my existing lights and the rack I just got with the 3 new QG 's .
The boxes are new lights and the silver racks are the new ones I just got not sure if I like them compared to the old rack.
Attachments
principlesarelife
Active Member
heat + too much light = stressed leaves
my girl's leaves displayed stress when i used both lights on the 2000w philzon cree cob
i ended up having to turn off half the lights because the very top of my buds were becoming white (light bleached.) had to remove to prevent budrot...
mfg recommends 24-30' away, yet my plant tops are 16' away from light
also wasn't monitoring PH close enough..
I'll have to buy a 7-8" tent vs my 6ft... or top a 2nd time next grow... or try main lining...
my girl's leaves displayed stress when i used both lights on the 2000w philzon cree cob
i ended up having to turn off half the lights because the very top of my buds were becoming white (light bleached.) had to remove to prevent budrot...
mfg recommends 24-30' away, yet my plant tops are 16' away from light
also wasn't monitoring PH close enough..
I'll have to buy a 7-8" tent vs my 6ft... or top a 2nd time next grow... or try main lining...
Similar threads
