Heisenbeans Genetics

Status
Not open for further replies.

Greenthumbskunk

Well-Known Member
This is completely off topic and I need some help. I've emailed and tried contacting 760 glass on this but I can't get anyone to respond back.
did a bubble hash to vape recipe and I think I added too much terpene to the oil but not sure. I can always add more oil if I did add too much. This is the formula that I used.

5 grams of kief - 40mL of a 50/50 mix of Vegetable Glycerin and
Propylene Glycol

After cooking over the top of slightly boiling water for around 3 hrs and stirring every 20 min I then ran it through a coffee filter.

I bought borosilicate mixing vials which I think holds around 4 ml. So I put 3 ml of finished product in 2 of them. I bought the 1 ml sourD terpene and the sundae driver. I used half of each one per 3 ml of oil so 4 vials total between the 2. Is this too strong? It did not mix well so I had to reheat the next morning.
Over all out of 5 grams of hash I got around 23 ml of thc oil. Is this too much or too little? Don't want to delute it and want it just right.


Also how much oil do I need to put in the cartridge? I bought these https://760glass.com/collections/empty-tanks-atomizers/products/5x-bud-touch-atomizer-tanks

Any easy ways on mixing a big amount? I got an ounce of bubble hash left

Many thanks!
 

Greenthumbskunk

Well-Known Member
Little update. Everything is going stellar. I took a few days to get everything worked on that needed to be done. New round of donor mons headed into DWC next week, shit load of seed moms a week away from getting pollen and alot more going in.
3 domes of cuts getting roots for seed moms
View attachment 4273402

Seed moms getting ready to start pollinating

View attachment 4273404


Three banana cookies on standby and another 3 going in a couple days

View attachment 4273405

Sunset sherbert getting close for wed cake pollen

View attachment 4273406


Mac1 for mac1 s1s going out for free. I have 4 other macs I'm using for crosses. Most likely mac crosses will be
Gorilla Glue #4
Wedding Cake
Black Banana cookies
Stardawg Corey Cut
S1s

I still have the mac1 pollen I'm gonna use on
GMO
Sundae Driver
Wedding Pie
Purple punch

View attachment 4273407

Mac1 reversed, this truly is a special plant. Wedding cake and Corey crosses are gonna be wack
View attachment 4273410

View attachment 4273413

View attachment 4273415

Fan on a banana cookies 9, wack as fawk. If you guys want vigor and flavor anything that's crossed to this plant is gonna be nuts.

View attachment 4273416

I'll update more in a few days

Jet fuel OG is full of seeds. I'll be posting a giveaway in the next couple weeks and give them out to the first ones who claim. I been hitting that plant pretty hard with ecsd pollen so that's the most likely cross but I'm sure theres stray as well. All the bastard seeds from the reversal pollen room will be given out as freebies.

What line of nutes you using. Got a good color to em.

I've been using commercial hydro nutes. I'll mix up a 5 gal concentrate mix in a 5 gal stackable container like this.

https://www.amazon.com/5-Gallon-Stackable-Containers-Emergency-polyetholene/dp/B01KPAHHKA/ref=asc_df_B01KPAHHKA/?tag=&linkCode=df0&hvadid=309843523169&hvpos=1o3&hvnetw=g&hvrand=12436141320072064783&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9014651&hvtargid=pla-571659963988&psc=1&ref=&adgrpid=60676482854&th=1


I have one for calcium nitrate, masterblend, early bloom, late bloom and Cal mag.

When mixing nutes In my 55 gal Barrell over the top of my resume tank with float valve. The barrel really holds 65 gal so I mix up my blend I want in 5 gal bucket and dump it in while my Barrell is filling up.
My concentrate i made up I weighed and wrote down and then added to water to determine ppm. Like 15 ml per gal of masterblend is 300 ppm for example. 3 ml per gal of early bloom adds 180 ppm. Etc

I've saved a fortune doing this instead of buying water.

I have around 1000 lbs of powder to mix bloom and 400 lbs of calcium nitrate lol
Gonna last me a while
 

Heisenbeans

Well-Known Member
What line of nutes you using. Got a good color to em.

I've been using commercial hydro nutes. I'll mix up a 5 gal concentrate mix in a 5 gal stackable container like this.

https://www.amazon.com/5-Gallon-Stackable-Containers-Emergency-polyetholene/dp/B01KPAHHKA/ref=asc_df_B01KPAHHKA/?tag=&linkCode=df0&hvadid=309843523169&hvpos=1o3&hvnetw=g&hvrand=12436141320072064783&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9014651&hvtargid=pla-571659963988&psc=1&ref=&adgrpid=60676482854&th=1


I have one for calcium nitrate, masterblend, early bloom, late bloom and Cal mag.

When mixing nutes In my 55 gal Barrell over the top of my resume tank with float valve. The barrel really holds 65 gal so I mix up my blend I want in 5 gal bucket and dump it in while my Barrell is filling up.
My concentrate i made up I weighed and wrote down and then added to water to determine ppm. Like 15 ml per gal of masterblend is 300 ppm for example. 3 ml per gal of early bloom adds 180 ppm. Etc

I've saved a fortune doing this instead of buying water.

I have around 1000 lbs of powder to mix bloom and 400 lbs of calcium nitrate lol
Gonna last me a while
I have like 20 YouTube videos on growing and shit lol.
Starts here on my systems and every thing I use

 

Greenthumbskunk

Well-Known Member
I have like 20 YouTube videos on growing and shit lol.
Starts here on my systems and every thing I use


Ya I've done all that. But if I had to do it over again I would of bought those square buckets like you got. I looked into em but the shipping turned me off.
So I just went to Walmart and bought 20 gal totes.

Started using 3" uniseals and ended up busting half the totes cause of how hard it was to get the 3" schedule 40 pipe into the seals. And half of em would drip cause the concrete floor is uneven. So I had to cauk the shit out of em to make sure no leaks. For the tops I just cut out a hole for the 8" net cup to go into.

I got about 2/3 done and decided fuck this!! And bought 3" slip slip bulkhead fittings. When you step up from 2" -3" fittings their is gonna be price jump!

I do not have to worry about roots stopping up my lines though lol.
I also top feed instead of using airstones. In my veg tent I have 18-5gal buckets with 1.5 line and uniseals and waterfall technique.. Tried using bulkhead fittings but that was a worthless endever is the bucket was to curved to even try . I could tell by looking at it when I stuck em in the bucket it wasn't gonna work. Also used silicon around the seals and pipe/ bucket to make sure no leaks.


Heres a couple picks of me mocking it up and getting it together.
I'm going to take it a part and just use it around the outside edges of my room.

The other pic of the buckets is one of my veg tents.
Root pic.is my typical size root if flowering a 18" plant. I flowered a jack herer that was 2' tall and it swallowed the other plant next to it. It's base was as big as your forearm and yielded close to 2 lbs in one tote. Screenshot_20181212-225454.png IMG_20180623_004305.jpg IMG_20180621_142058.jpg Screenshot_20181212-225602.png IMG_20190114_013025.jpg
 

Heisenbeans

Well-Known Member
Ya I've done all that. But if I had to do it over again I would of bought those square buckets like you got. I looked into em but the shipping turned me off.
So I just went to Walmart and bought 20 gal totes.

Started using 3" uniseals and ended up busting half the totes cause of how hard it was to get the 3" schedule 40 pipe into the seals. And half of em would drip cause the concrete floor is uneven. So I had to cauk the shit out of em to make sure no leaks. For the tops I just cut out a hole for the 8" net cup to go into.

I got about 2/3 done and decided fuck this!! And bought 3" slip slip bulkhead fittings. When you step up from 2" -3" fittings their is gonna be price jump!

I do not have to worry about roots stopping up my lines though lol.
I also top feed instead of using airstones. In my veg tent I have 18-5gal buckets with 1.5 line and uniseals and waterfall technique.. Tried using bulkhead fittings but that was a worthless endever is the bucket was to curved to even try . I could tell by looking at it when I stuck em in the bucket it wasn't gonna work. Also used silicon around the seals and pipe/ bucket to make sure no leaks.


Heres a couple picks of me mocking it up and getting it together.
I'm going to take it a part and just use it around the outside edges of my room.

The other pic of the buckets is one of my veg tents.
Root pic.is my typical size root if flowering a 18" plant. I flowered a jack herer that was 2' tall and it swallowed the other plant next to it. It's base was as big as your forearm and yielded close to 2 lbs in one tote. View attachment 4273795 View attachment 4273800 View attachment 4273801 View attachment 4273804 View attachment 4273805
Uline ships buckets for free
 

Al Yamoni

Well-Known Member
Ya I've done all that. But if I had to do it over again I would of bought those square buckets like you got. I looked into em but the shipping turned me off.
So I just went to Walmart and bought 20 gal totes.

Started using 3" uniseals and ended up busting half the totes cause of how hard it was to get the 3" schedule 40 pipe into the seals. And half of em would drip cause the concrete floor is uneven. So I had to cauk the shit out of em to make sure no leaks. For the tops I just cut out a hole for the 8" net cup to go into.

I got about 2/3 done and decided fuck this!! And bought 3" slip slip bulkhead fittings. When you step up from 2" -3" fittings their is gonna be price jump!

I do not have to worry about roots stopping up my lines though lol.
I also top feed instead of using airstones. In my veg tent I have 18-5gal buckets with 1.5 line and uniseals and waterfall technique.. Tried using bulkhead fittings but that was a worthless endever is the bucket was to curved to even try . I could tell by looking at it when I stuck em in the bucket it wasn't gonna work. Also used silicon around the seals and pipe/ bucket to make sure no leaks.


Heres a couple picks of me mocking it up and getting it together.
I'm going to take it a part and just use it around the outside edges of my room.

The other pic of the buckets is one of my veg tents.
Root pic.is my typical size root if flowering a 18" plant. I flowered a jack herer that was 2' tall and it swallowed the other plant next to it. It's base was as big as your forearm and yielded close to 2 lbs in one tote. View attachment 4273795 View attachment 4273800 View attachment 4273801 View attachment 4273804 View attachment 4273805
That's badass!
 

Greenthumbskunk

Well-Known Member
Uline ships buckets for free

Wish I had known that lol. I'd been all over it. I'm undecided on redoing everything and going with square buckets like u got or just moving my rows around the edge of the room. I have a 3" valve on the rows in case I needed to cut off a row and just use one row. With having 3 rows it gets difficult getting to the middle row for maintenance. My tents it's easy, just open flap and the 2 plants are right their and I can mess with the trellis, check pH, and pluck leaves.

I already got a chunk of change invested in it with a 3" uniseal in my Rez tank that also has a 1" bulkhead feeding my external pump.
That thing is a beast. Think it's rated a little over a 1000 gph ( general hydroponics) but it pumps way more than the other brand of pump that's in my main veg tent. It's 950 gph.

Really like that pump, I got a banjo Y filter right before it to make sure any Clay pebble, rock, slim etc doesn't destroy it. I've caught some stray crap in it.
 

Greenthumbskunk

Well-Known Member
I dunno maybe I could move all those big totes out in the green house and do hydro out their haha. Only way that work would be with Auto flowers unless it was like in late July when I put plants in em.

I Need to decide something quick because I have plants past ready to go into flower.
 

waxman420

Well-Known Member
Any chance is someone in Canada willing to collect shipping money and send it in 1 envelope to heisen? If I remember correctly shipping a document mailer to usa was like 25 CAD it would be kinda silly for us Canucks to send seperately
 

waxman420

Well-Known Member
I had issues with getting cuts to root. I finally got 1 to root so I'm still waiting. Winter time sucks for everything.
I'll have pollen from her any day now but s1s are gonna be a ways out.

Why is it harder to get cuts to root in winter ?? The dry rh? I set up a dome last week still no luck I tried peat and rock wool nada
 

Heisenbeans

Well-Known Member
Why is it harder to get cuts to root in winter ?? The dry rh? I set up a dome last week still no luck I tried peat and rock wool nada
Root zone temp. I hooked up a 4 tray heat mat set to 82 to put an end to this bullshit. Been putting it off for years cause it's never been this damn cold so many days straight in a row.
Ambient light and warm root zone temps is key to roots.
 

Turpman

Well-Known Member
Any chance is someone in Canada willing to collect shipping money and send it in 1 envelope to heisen? If I remember correctly shipping a document mailer to usa was like 25 CAD it would be kinda silly for us Canucks to send seperately
Ya it's crazy. But it's the only way to get tracking. It would be nice to just send x amount and spend till it's gone, that way your not sending every other week LOL . Regular mail works too just a little risk involved sending big cash. I wonder if EMT would work? I have a us cash account.
 
Status
Not open for further replies.
Top