Help me choose a 4x4flowertent light

When i talked to them they said these were the two options are you sure buying those 3 smaller lights was best choice??
"Hello - for flowering a 4'x4' area, you will need roughly 600 watts. We have two options - the first is a traditional light fixture, and the second is pendant style lighting :


timbergrowlights.com

Redwood VS
High quality COB LED Grow Lights built in the USA using top quality components. 3 Year Warranty, high PAR/PPF output, low heat, close canopy operation, silent no fans, dimmable operation.
timbergrowlights.com
timbergrowlights.com

timbergrowlights.com

Quintet of Daisies (5)
High quality COB LED Grow Lights built in the USA using top quality components. 3 Year Warranty, high PAR/PPF output, low heat, close canopy operation, silent no fans, dimmable operation.
timbergrowlights.com
timbergrowlights.com

I didn’t buy three of the daisies. I bought three of these, for a total of 9 cobs. That’s 930 watts from the wall. It’s similar to the Timber Fatty, except with three dimmers instead of one.
1F6EF103-01F6-4C81-A3C7-322D94EE26DA.jpeg
 
Are you willing to screw a few screws, drill a few holes and connect a few wires?
If you are, just buy 10 gen2 EB bridgelux 2'(560mm)strips, a12-15' of 3/4" angle aluminum and a 600w HLG-600H-** driver and run them all in parallel. This will cost less than $400.
 
Question on Timbers, anyone ever tried the 1750K? It’s solely for flowering just never considered that hot
 
For a 4 x 4? HLG 550V2 rspec wins, Timber is good though......Own the Rspec and a Timber 2VL and two CMH's

More Photon Density to the canopy then any Timber, at 18" or 24"
 
I recommend the Amare Bar-8, Canna-Spec.
Its a beast though.
In 2 months the UVL will be Available in a lightweight, less expensive version that includes UVA+B.
Sammy 301H , Olson colors, LG UV diodes on remote drivers, dimmable, separates in the middle for x2 330w lights. 660w 2.6 umol/j. UL-880 Cert. Ip-66 , 1250 retail to your door.

 
Air walker mentioned some Bridgelux GEN 2 strips in a DIY build. I love mine. It pounds the light. @Airwalker16

Though I added more strips
 

Attachments

  • 4194CC63-7661-4F0F-82D8-96F93D884C60.jpeg
    4194CC63-7661-4F0F-82D8-96F93D884C60.jpeg
    2.2 MB · Views: 34
  • 2A5CABE7-36B3-4E18-BA09-D56778B7E962.jpeg
    2A5CABE7-36B3-4E18-BA09-D56778B7E962.jpeg
    3.1 MB · Views: 35
Back
Top