Milkycat123
Member
Looks like a bit of clawing to me. You can see the new growth has some yellowing at the tips. I ran 4L of RO water through it thinking it was time for a flush but I'm wondering if I did not run enough water through it. I've been feeding it roughly half strength fox farm grow big and cal mg. I think it had been about 3 weeks since I began adding nutes. Should I run more water or do I have to wait until it dries out again? Also I think I may have raised the ph a little when I did the flush, the RO water I used had been consistently testing around 7.0 but when I checked what was left in the bottle it tested around 7.6 not sure why it would have changed.
Should I have run more water through? I wasn't able to determine if you need to add anything to the water for a flush or not. Or am I completely off and it is a different issue?
Would appreciate any help, the plant deserves to be healthy.
Plant is a G13 Haze from Barney's Farm. It's the only one doing this currently.
Container: 4gal
Medium: Promix HP + 20-30% worm castings
Light: 1000w full spectrum led
RH: Has been 55-65% fairly constant
Temp: Has been 24-27 but the last 2 days the room has dropped to 19 and 20 degrees at night.
Let me know any more information needed if any. Thanks again everyone!
Here's the new growth
And the clawing
Should I have run more water through? I wasn't able to determine if you need to add anything to the water for a flush or not. Or am I completely off and it is a different issue?
Would appreciate any help, the plant deserves to be healthy.
Plant is a G13 Haze from Barney's Farm. It's the only one doing this currently.
Container: 4gal
Medium: Promix HP + 20-30% worm castings
Light: 1000w full spectrum led
RH: Has been 55-65% fairly constant
Temp: Has been 24-27 but the last 2 days the room has dropped to 19 and 20 degrees at night.
Let me know any more information needed if any. Thanks again everyone!
Here's the new growth
And the clawing