yoitsslobo
Active Member
Ok I just bought a 100 watt high pressure sodium and it won't turn on when I screw it in..???? Is it broken?do I need a different adaptor??.. Pms the screw in piece is gold not silver
help wit sodium bulb
- Thread starter yoitsslobo
- Start date
yoitsslobo
Active Member
Ok its not the b ulb I just bought a 2nd one..same shit..hellp need these things to bud
yoitsslobo
Active Member
Standard socket..what's a ballast?do I need 1?
BalloonFight
Active Member
ruh roh...
yoitsslobo
Active Member
That's all u got for me man?help me out
bewareofdogandowner
Active Member
Hairy Bob
Well-Known Member
"HID lamps provide light from an electric discharge or arc and have a negative resistance characteristic that would cause them to draw excessive current leading to instant lamp destruction if operated directly from line voltage. The ballast is a power supply for arc discharge lamps. Its purpose in HID lighting is to provide the proper starting voltage to initiate and maintain the lamp arc and to sustain and control lamp current once the arc is established."
Source : http://www.advancetransformer.com/support/faqs.jsp?pbid=22&faq_id=113#113
Source : http://www.advancetransformer.com/support/faqs.jsp?pbid=22&faq_id=113#113
yoitsslobo
Active Member
i juist bougt the bulg thinking it would screw in and turn in no problems..guess i was wrong
..how much do these ballasts go for
Cr8z13
Well-Known Member
You need something like this:
*
http://www.buyalllighting.com/100wahiprsob.html
*
I found this one too:
http://www.1000bulbs.com/100-Watt-High-Pressure-Sodium/604/
Doesn't look like it comes with a mogul socket, though. Maybe someone else here knows of a cheaper alternative.
frostythesnowthug
Well-Known Member
yeah you need a set of ballast gear to make the bulb fire up..
Dont think i've even seen 100w ballasts for sale, most ppl working with low watt setups just buy cheap 150w econolights and strip them down to wok in cabs etc..
might be worth you checkin out the thread in my sig, its for the 150w hps club, and theres wiring diagrams and strip downs of econolight and other type HPS lights.
Dont think i've even seen 100w ballasts for sale, most ppl working with low watt setups just buy cheap 150w econolights and strip them down to wok in cabs etc..
might be worth you checkin out the thread in my sig, its for the 150w hps club, and theres wiring diagrams and strip downs of econolight and other type HPS lights.
tip top toker
Well-Known Member
how long is a piece of string? you'll generally get what you pay for. you could probably look around and pick one up for £20, you could probably also look around and find one for £100. all depends on what you need really. cheap ones are generally not gonna be as reliable, i'd be worried about fires from cheap jobs (they get HOT!)
i'm not too sure on backwards capability of ballasts, i.e. a 600w ballast in conjunction with a 150w bulb, but typically you'd want your ballast to match up with your bulb. from what i've been told though, 250w HPS bulbs are realllly pushing it, and 400w is the norm. lower than that and people tend to stick with CFL lighting due to it being very very cheap in comparrison
i'm not too sure on backwards capability of ballasts, i.e. a 600w ballast in conjunction with a 150w bulb, but typically you'd want your ballast to match up with your bulb. from what i've been told though, 250w HPS bulbs are realllly pushing it, and 400w is the norm. lower than that and people tend to stick with CFL lighting due to it being very very cheap in comparrison
frostythesnowthug
Well-Known Member
the 150w will grow some nice plants if you have the grow space setup right.. their efficacy can be seen in the 150 thread.
but obviously bigger is better if you have enough ventilation and no heat worries.
tip top toker
Well-Known Member
ah, good to know. i've always been told not to bother with anything less than 250, and even that should have some cfls alongside it.
i'll have to take a gander at that thread you mention
simpsonsampson420
Well-Known Member
MYGIRLS has a couple videos on youtube and had a thread started about backwards compatability of lights... the videos are of him using a 1000w MH bulb in a 1000w HPS ballast... and a 400w MH bulb in a 1000w HPS ballast.. he says he has been doing it for a couple years... https://www.rollitup.org/general-marijuana-growing/207313-im-here-end-all-about-3.html#post2666286
although this is only true with MH bulbs in HPS ballasts.. for some reason HPS wont work in MH ballasts... but you can use any size MH bulb as long as you have a ballast big enough to run it.. the wattage of the bulb cannot exceed that wattage of the ballast... only equal to or less than... this means you could get a 1000w ballast to start with.. use a 400w bulb in it to germ with.. switch to a 600w to veg with.. and 1000w to flower with.. not only would you save money on electricity over the grow period... but you would save on bulb life.. not to mention the cost on 2 ballasts you wouldnt need to use...
although this is only true with MH bulbs in HPS ballasts.. for some reason HPS wont work in MH ballasts... but you can use any size MH bulb as long as you have a ballast big enough to run it.. the wattage of the bulb cannot exceed that wattage of the ballast... only equal to or less than... this means you could get a 1000w ballast to start with.. use a 400w bulb in it to germ with.. switch to a 600w to veg with.. and 1000w to flower with.. not only would you save money on electricity over the grow period... but you would save on bulb life.. not to mention the cost on 2 ballasts you wouldnt need to use...
yoitsslobo
Active Member
i only have a 100 watt but its for PC grow cse..is this bulb too hott?? what should i substitute for flowering bulb
MR M3RKLEZz
Active Member
go 4 all sorts of prices just make sure u buy a hps or mh 100watt ballast when u do anything else will blow the bulb or wont be powerful enougth fancy buying a light without a ballast were did u get that from lol
Similar threads
