there should be
8x A poles
4x B poles
4x C poles
8 corners
2 or 3 support bars
the A poles (smallest) is for the bottom and top of tent
the b fit on the BOTTOM corners
the C fit on to the B poles
all the poles should have a sticker stateing A,B,C ECT
BUILD IT UP SO YOU HAVE THE FRAME
THEN THROW THE TENT OVER THE TOP AND PULL IT DOWN, YOU SHOULD SEE WERE THE CORNERS OF THE TENT ARE DUE TO THE STITCHING, try that and see what happens
the frame fits inside the tent even the bottom, so as you sling the tent over and pull it down the bottom of the tent should be pulled underneath the frame, once you do this then zip it up and make any adjustment to the tent. i.e... straighten the fabric
Put the frame up first,then have a look at the cover that goes over the top of the frame.There will be a zip door turn it so it's the right way round so the zip is the right way.open the zip and tuck the bottom section around the frame then pull the rest of the top over and around the frame be careful not to go to mad,it should all fit like a glove.