GCHempfarmer
Active Member
Hey RIU!
I just thought I'd share my newest grow with you all. 10 "regular" Blueberry seeds from Dutch passion. This is my second grow, from a somewhat sucsessful first grow. My first batch was 5 femed skunk seeds which I completed start to finish only to screw up the drying/curing process.
Anyway all ten seeds were germed with a bag and paper towel, I then set them under 2 floro tubes untill they were about 1 week old then thrown under a 400w MH lamp. Steady temp sitting at 75 degrees with a RH too low for my reader to register (under 25%). My soil mix consists of 60% pro-mix, 20% perlite, 15% worm castings, and 5% Bio Bizz pre-mix.
The nute line I'm using again is Bio Bizz which consists of the Bio-Grow, Alg-A-Mic, Bio-Bloom, and Top-Max.
So now I'm 20 days into the grow on 18/6, some of the plants came out severely deformed, but I'm going to keep them just for the hell of it, experimenting with LST, Top, and Fim for I am still new to those techniques.
No nutes yet, I will be starting in a few days going 1/4 strength for about a week with the veg nutes then swapping my lights to 430w HPS and a 12/12 lighting schedule.
Here are a few pics of my grow chamber, anyway nice to meet you guys! Wish me luck!
4" Squirrel cage fan 95cfm leading to the attic where a carbon scrubber is installed.
4" inlne Vortex fan 270 cfm also leading to the attic installed to a vent that leads directly outside. On a Temerature control timer.
Temerature control timer set to 75 degrees.
One of the deformed plants, this thing is growing so wierd, some leaves facing the soil, curved leaves, node leaves seem to be outgrowing some of the fan leaves. This paticular one is LSTing already, some of the other plants are not even worth showing, they are still on their first set of leaves.....wierd. As you might be able to see in the backgroud. Same soil, same light , same water, I also made sure the soil was well mixed before I did any planting.
And the others. Some on LST, I also topped on of the better looking ones for the first time. I'll se how it goes before I attempt another top or fim. And yes I realize I have to buy a new pH meter
I just thought I'd share my newest grow with you all. 10 "regular" Blueberry seeds from Dutch passion. This is my second grow, from a somewhat sucsessful first grow. My first batch was 5 femed skunk seeds which I completed start to finish only to screw up the drying/curing process.
Anyway all ten seeds were germed with a bag and paper towel, I then set them under 2 floro tubes untill they were about 1 week old then thrown under a 400w MH lamp. Steady temp sitting at 75 degrees with a RH too low for my reader to register (under 25%). My soil mix consists of 60% pro-mix, 20% perlite, 15% worm castings, and 5% Bio Bizz pre-mix.
The nute line I'm using again is Bio Bizz which consists of the Bio-Grow, Alg-A-Mic, Bio-Bloom, and Top-Max.
So now I'm 20 days into the grow on 18/6, some of the plants came out severely deformed, but I'm going to keep them just for the hell of it, experimenting with LST, Top, and Fim for I am still new to those techniques.
No nutes yet, I will be starting in a few days going 1/4 strength for about a week with the veg nutes then swapping my lights to 430w HPS and a 12/12 lighting schedule.
Here are a few pics of my grow chamber, anyway nice to meet you guys! Wish me luck!
4" Squirrel cage fan 95cfm leading to the attic where a carbon scrubber is installed.
4" inlne Vortex fan 270 cfm also leading to the attic installed to a vent that leads directly outside. On a Temerature control timer.
Temerature control timer set to 75 degrees.
One of the deformed plants, this thing is growing so wierd, some leaves facing the soil, curved leaves, node leaves seem to be outgrowing some of the fan leaves. This paticular one is LSTing already, some of the other plants are not even worth showing, they are still on their first set of leaves.....wierd. As you might be able to see in the backgroud. Same soil, same light , same water, I also made sure the soil was well mixed before I did any planting.
And the others. Some on LST, I also topped on of the better looking ones for the first time. I'll se how it goes before I attempt another top or fim. And yes I realize I have to buy a new pH meter