How can I stabilize my ph (major fluctuations)

5BY5LEC

5BY5LEC

Well-Known Member
Where did you get that style of tubing at? Looks like CC but that stuff is stupid expensive.
 
5BY5LEC

5BY5LEC

Well-Known Member
If his pump is in the water couldn't he just run a venturi and some 1/4 tubing out the top?
Those things really blast out the bubbles.
 
5BY5LEC

5BY5LEC

Well-Known Member
Yeah but if your not running a filter it might clog.
Check this out. You dont have to build one. You just buy a nozzle that hooks to end of your pump. You run a 1/4 air line off that up out of the water so it can suck air.
 
projectinfo

projectinfo

Well-Known Member
rkymtnman said:
the more the merrier! the only downside would be increased heat by more pumps but the chiller negates that.
Click to expand...
Only one pump. No chiller .

Im in canada and i run bennies. Southern ag. Gff

Each table has two drains going back to the res plus one runaway line in the res

Its a 396 eco plus pump.

3/4 feed line that ends in a loop, and has small triangles cut out for feed holes into each net pot
 

Attachments

5BY5LEC

5BY5LEC

Well-Known Member
projectinfo said:
Only one pump. No chiller .

Im in canada and i run bennies. Southern ag. Gff

Each table has two drains going back to the res plus one runaway line in the res

Its a 396 eco plus pump.

3/4 feed line that ends in a loop, and has small triangles cut out for feed holes into each net pot
Click to expand...
Those 396's put the danners to shame for what they cost.
 
NCSmallTime

NCSmallTime

Member
So I got home last night started to drain my res to sterilize everything . Once 90% if the water was removed I could see how much hydrotron partials were in the bottom. I decided to RIP everything b.c apart and rinse and sterilize every thing the new pump filter was horrible. Also where I glued the air stones with the marine glue was starting to mold . Hooked everything back up added cal-mag and 1/2 strength nutes and set ph at 5.3 woke up this morning ph is at 5.4 .so thanks everyone for there input and help
 
NCSmallTime

NCSmallTime

Member
Okay problem is back set ph to 5.3 last night and when I woke up 6 hours later 7.6 ... I removed the cooler and I'm flushing it out with h202 for 24 hr . This is starting to piss me off . I think I'm going to re start my grow when I figure it out and start fresh but need to figure it out first
 
You must log in or register to reply here.
Top