Splinter7
Well-Known Member
i can't. light and space issues. i have a single air input and it has an intake fan.
how keep tent from collapsing from pressure
- Thread starter Splinter7
- Start date
Splinter7
Well-Known Member
1.7x3x5 fan is a vivosun 440cfm turned all the way down. it just sucks.
Budzbuddha
Well-Known Member
Fan controller - simple and easy to adjust.
smokey0418
Well-Known Member
Home Depot has some shelving that works well for the walls coming in, storing a pair of scissors.
Maybe even a string to tie up a plant.
Looks like the humidifiers out of water too.
Enjoy
Maybe even a string to tie up a plant.
Looks like the humidifiers out of water too.
Enjoy
Splinter7
Well-Known Member
i have a built in controller, it just doesn't go to close to zero without going to zero...at hte current speed I am having humidity issues...not super bad, but i am hitting just above 55% at night.
jondamon
Well-Known Member
And what’s so wrong about that?
As long as air movement and temps are within range that 55% RH should be golden.
Splinter7
Well-Known Member
ok. i guess i have kept it a bit lower during flower. research says it's probably good. i like the skeleton solutions the most...especially if i have the other parameter worked out...still, those bungies are doing some work. thanks for the help
twentyeight.threefive
Well-Known Member
Holy crap that tent is gross. Please clean it.
V256.420
Well-Known Member
LOL! I just got done emptying it. Give an old man a break will ya
Splinter7
Well-Known Member
i haven't seen 36"x20" though. probably just diy now.
Rahz
Well-Known Member
Like some people suggest with wood slats and zip ties, I use aluminum angle. You can get it at big box hardware but if you have a metal supplier nearby it will be a lot cheaper. I don't remember what profile I used but whatever is smallest will work fine. It doesn't need a lot of strength. With wood prices like they are the aluminum is probably cheaper.
At a metal supply the angle will come in 20ft length. They will cut it to size if you ask them to, often with no charge. All you have to do is drill the holes and zip them in place.
At a metal supply the angle will come in 20ft length. They will cut it to size if you ask them to, often with no charge. All you have to do is drill the holes and zip them in place.