How to clean LED'S?

G

Green Rascal

Member

Mar 7, 2023

• #1

Hey, how would you clean your LED'S ?
I was thinking of using a soft painters brush to clean dusts away. Any advices will be appreciated. Thank you.
Picture of led light attached.

 

Attachments

• 
  20230206_155535.jpg
  826.7 KB Views: 24

Hook Daddy

Well-Known Member

Mar 7, 2023

• #2

Soft brush is fine for dust. Damp cloth for dirt is ok too, just keep away from harsh chemicals that can remove the water resistant coating.

 

G

Green Rascal

Member

Mar 7, 2023

• #3

Hook Daddy said:

Soft brush is fine for dust. Damp cloth for dirt is ok too, just keep away from harsh chemicals that can remove the water resistant coating.

Click to expand...

So you reckon wet cloth will be fine to use,thank you.

 

Hook Daddy

Well-Known Member

Mar 7, 2023

• #4

Damp is fine. Unplug the light first if you are concerned about the quality of the coating, although it should be fine.

 

PopAndSonGrows

Well-Known Member

Mar 7, 2023

• #5

I personally use a soft bristle brush very very gently on the LED board, and a damp microfiber cloth dampened with just distilled water, to wipe down the rest of the fixture.

 

bk78

Well-Known Member

Mar 7, 2023

• #6

I grab a damp microfibre towel and wipe each bar thoroughly between runs.

 

H

Hooda Thunkit

Well-Known Member

Mar 7, 2023

• #7

Lint free cloth plus 90% isopropanol says every led manufacturer ever.

 

N

Nope_49595933949

Well-Known Member

Mar 9, 2023

• #8

You can litterally rinse most electronics off with isopropyl alcohol. Just give it a min or 2 to dry off.

 

amneziaHaze

Well-Known Member

Mar 9, 2023

• #9

can you use that glass spray?for cleaning glass

 

H

Hooda Thunkit

Well-Known Member

Mar 10, 2023

• #10

Would not use glass cleaner on the les itself for sure. Not sure if ammonia and phosphor play nice together.