how to make hash?

trusten

Well-Known Member
ok i herd when u harvest your plant if u save all the leaves from the plant that u cut off and stuff u can make hash out of them.is this true? if so how is this done
 

TillthedayiDIE420

Well-Known Member
well you need a certain product a bubble bag or somthing you put you're cuttins in and you put in a lil bit of water and bam mate, your makin hash
 

trusten

Well-Known Member
whats a cheap machine i can order to make hash i don't wanna spend alot but i want hash so could u give me a link perhaps?.and can i use male leafs to make hash to?
 

TillthedayiDIE420

Well-Known Member
K well mate, the proper name is Schwagg bagg, or Bubblebag's i cannot find you a link... just browse the net lad

Kill all you're male plants... dont grow them.... they will make seeds in ur bud
 

illinigreen

Active Member
I have been trying to figure out what the silk sreen is rated at in the video. The only discription is "its the same one used for printing t-shirts". I wish he would have told what micron rating it was... IE 165mc or 125 microns or what ever.

Anyone know what the right rating is for the proper silk screen? I have been looking at bubble bags but there are really expensive. Even the stamps and presses on e-bay are freaking way over priced.
 

pastor420

Active Member
I have been trying to figure out what the silk sreen is rated at in the video. The only discription is "its the same one used for printing t-shirts". I wish he would have told what micron rating it was... IE 165mc or 125 microns or what ever.

Anyone know what the right rating is for the proper silk screen? I have been looking at bubble bags but there are really expensive. Even the stamps and presses on e-bay are freaking way over priced.
Take a look at this instruction sheet. It lists the various micron sizes.
Bubble Bags - Bubble Now Instructions
 

videoman40

Well-Known Member
you are very welcome, hope you get some kick ass hash!

You know.....another thing you can do, and is very easy to do, is make hash oil.

take your dry clippings, and/or male plants, make sure its dry, place em into the blender, add some isopropyl alcohol. Just enough to wet the plant matter. I use 91% but get whatever is available in your area, some areas have 99%. whichever, they are both cheap.

Run your blender for a couple of minutes, than get a coffee filter, and pour the mixture into the filter, hold over a bowl, you may need to "squeeze the mixture" to get everything out of it. Be careful at this point, you dont want to rip the filter, or have any of the mixture run over the top.

Than just put the bowl aside and wait for the iso to evaporate, usually about 24 hours, if you want to hurry it along, you could place it near a space heater, blowing on it. But you better keep an eye on it.
 

ngtybear

Well-Known Member
Ok Video Man... Only because you have been a rockin poster and because it is v-day... and because I have a great buz going.. ok F it... because I love rollitup.. WTK:)

I made some cannaoil a while back. hated the stuff. I did a double shot like it was vodka (my fav). Sucked and did not get me off at all....

A few weeks went by and I was cooking dinner for my GF. I fried some muchrooms and used the cannnaoil and then we smoeked a little. Dewd!!! I was high for 15 hours. I mean out of my friek'n mind. I was in a meeting the next day and was so in the fog I had no idea what was going on!!!! ;)

Just an FYI... :D
 

ablazed blunt

Well-Known Member
you are very welcome, hope you get some kick ass hash!

You know.....another thing you can do, and is very easy to do, is make hash oil.

take your dry clippings, and/or male plants, make sure its dry, place em into the blender, add some isopropyl alcohol. Just enough to wet the plant matter. I use 91% but get whatever is available in your area, some areas have 99%. whichever, they are both cheap.

Run your blender for a couple of minutes, than get a coffee filter, and pour the mixture into the filter, hold over a bowl, you may need to "squeeze the mixture" to get everything out of it. Be careful at this point, you dont want to rip the filter, or have any of the mixture run over the top.

Than just put the bowl aside and wait for the iso to evaporate, usually about 24 hours, if you want to hurry it along, you could place it near a space heater, blowing on it. But you better keep an eye on it.



Thanks for the tip videoman40
 

green_nobody

Well-Known Member
you are very welcome, hope you get some kick ass hash!

You know.....another thing you can do, and is very easy to do, is make hash oil.

take your dry clippings, and/or male plants, make sure its dry, place em into the blender, add some isopropyl alcohol. Just enough to wet the plant matter. I use 91% but get whatever is available in your area, some areas have 99%. whichever, they are both cheap.

Run your blender for a couple of minutes, than get a coffee filter, and pour the mixture into the filter, hold over a bowl, you may need to "squeeze the mixture" to get everything out of it. Be careful at this point, you dont want to rip the filter, or have any of the mixture run over the top.

Than just put the bowl aside and wait for the iso to evaporate, usually about 24 hours, if you want to hurry it along, you could place it near a space heater, blowing on it. But you better keep an eye on it.
its a good way to make oil, but isopropyl alcohol is a damn fire hazard, it inflames easier then ethanol and almost as good as ether! so watch out doing the extraction, do it outsides only and keep an extinguisher handy!!
a friend of mine scorched his mixer trying to make oil, so be warned;) burned his deck and hot tub for a little oil:(
 

videoman40

Well-Known Member
While what you say is very true! The main reason I like this method is it does not utilize an oven or stovetop, like alot of other methods, it relies on the iso to evaporate naturally.

Having said that, I am lazy and cheap, so I found to improve on this method, you can add a little kief, or if you dont have any, use some of the clippings you made the oil from to the oil before the iso evaporates. As the oil dries the oil will adhere to the clippings, forming a black hash.

This has several benefits, one if you are keeping it, its much easier to deal with and smoke, and (two) if you are into it for a profit, I find it much easier to sell black hash than oil. You could make a small fortune from black hash, before you even sell your 1st oz of bud from your grow. We need to utilize everything and this is simple to do, with a zero investment.

its a good way to make oil, but isopropyl alcohol is a damn fire hazard, it inflames easier then ethanol and almost as good as ether! so watch out doing the extraction, do it outsides only and keep an extinguisher handy!!
a friend of mine scorched his mixer trying to make oil, so be warned;) burned his deck and hot tub for a little oil:(
 

pauliojr

Well-Known Member
The video that Videoman posted is probably one of the best ones out there. I watched the whole movie of what the video clip is in and it's pretty good. Forget what it's called, but that guy's voice is awesome lol. I hope to make some hash soon as well.
 

green_nobody

Well-Known Member
While what you say is very true! The main reason I like this method is it does not utilize an oven or stovetop, like alot of other methods, it relies on the iso to evaporate naturally.

Having said that, I am lazy and cheap, so I found to improve on this method, you can add a little kief, or if you dont have any, use some of the clippings you made the oil from to the oil before the iso evaporates. As the oil dries the oil will adhere to the clippings, forming a black hash.

This has several benefits, one if you are keeping it, its much easier to deal with and smoke, and (two) if you are into it for a profit, I find it much easier to sell black hash than oil. You could make a small fortune from black hash, before you even sell your 1st oz of bud from your grow. We need to utilize everything and this is simple to do, with a zero investment.
that is true video, and i personally would let the oil dry on me if i use iso, that stuff is on the watch list for causing cancer, at work we only use it in a ventilated chamber...:spew: so whatever, watch out with that stuff or we end up looking like meaths-lab:-|
 
Top