Hygrozyme vs SM-90

StreetRider

StreetRider

Active Member
Looking for a little help from the peanut gallery. I am going to go up to the shop and get either Hygrozyme or SM-90 to help control algee.

Has anyone had experience with either of these?

Pro's - Con's?
 
hygrozyme is pythium in a bottle. may have been a bad batch, but is the direct cause of me going back to perlite/soil and leaving aero altogether.

avoid hygrozyme, use something with a better history like cannazyme.
 
I saw that a small portion of people had problems using it. Most people seem to love the stuff.

I have a 3x3 tray and because of having to move the containers around can not stop light from hitting the tray and trying to grow algae. Algae brings the gnats. And it just keeps getting worest.

SM-90 is a wetting agent, but if you look around it also helps provent aglea and helps the plants abosrb more.
 
StreetRider said:
I saw that a small portion of people had problems using it. Most people seem to love the stuff.

I have a 3x3 tray and because of having to move the containers around can not stop light from hitting the tray and trying to grow algae. Algae brings the gnats. And it just keeps getting worest.

SM-90 is a wetting agent, but if you look around it also helps provent aglea and helps the plants abosrb more.
Click to expand...

look into physan20, it kills the gnats and the algae, as well as most molds and mildews, bacterias and fungii. really good stuff, but the nuke of the horticultural world. be careful with it, it's a poison.
 
StreetRider said:
Thank you I will look into that. Question, thou. How close to harvest can you use it?
Click to expand...

i wouldn't spray anything on any flowers at all. esp so with physan20, i'd be afraid of residuals and smoking. the stuff has a ten page warning label :p

if you have mites in flower, it's bad, but not the worst. let the plants finish, and carefully clip off the leaves where the webbing is. dry normally, and pull off all remaining webs and buds will look picture perfect :). down side, mites can close the leaves in, creating mold spots. still, never a total failure ;)
 
Well, I bought a bottle of Hygrozyme today. I will attack with it in the morning. I will update this as I use it. Hopefully my pain can be someone elses gain.
 
Well, I have the hygrozyme in and so far so good.

I am going to run just water and it @ 8ml per gallon for 1 day, then add nutes monday.
 
Over 24 hours it raised the ph by .8. I can control that. I will keep updating as this goes. I hope it helps someone else.
 
Well, 3 days in and all is well.

I changed it out every other night. Tonight I added nutes at 1/4 strength. And will change the tank out again and go to half strength come the weekend.

The water smells much better, and the plants seem to be smelling more... Or maybe I can just smell them easier.<g>
 
I also use Hygrozyme but along side with an algaecide prescribed for aquarium plants. I use that at a rate of about 1 ml per 10 gallons...haven't had any problems.

Maybe I am wrong but maybe Hygrozyme isn't "pythium in a bottle" because of a bad batch but rather other problems may have existed such as water over 70 degrees...and so on. For me no problem.

Hope all goes well for you.
 
I can def. say that everything looks better, and that is with only putting it in 4 days ago. I can say I will continue to use it.

The agleacide I have been afraid to use. Everything I see makes me think that it wil either hurt the plant, or me when I consume it. Do you know the name of the type you use?

Thankx for the input.
 
Mr. Good said:
I also use Hygrozyme but along side with an algaecide prescribed for aquarium plants. I use that at a rate of about 1 ml per 10 gallons...haven't had any problems.

Maybe I am wrong but maybe Hygrozyme isn't "pythium in a bottle" because of a bad batch but rather other problems may have existed such as water over 70 degrees...and so on. For me no problem.

Hope all goes well for you.
Click to expand...

i think you misunderstand.... HYGROZYME made a bad batch, i didn't have a "bad batch" of clones. i was all aero, for a LONG time, with no problems.... UNTIL i added hygrozyme.

most people love it.... they hydro shop guy said they had a bad batch shipped out all over the country and no recall..... 2+2 is how much?
 
2 + 2 = 4.. We are not here for math.

We all have problems with our grows from time to time. Everyone just relax.. We can all add 2+2.
 
My ph is still rising about .6 is 25 hours, but I adjust and keep going. I know I needed it, so there is probibly alot of build up to be broken down. I can tell you that there has been no sudden down turn, and to me it looks like I am getting a nice flash of fresh white hairs.
 
StreetRider said:
My ph is still rising about .6 is 25 hours, but I adjust and keep going. I know I needed it, so there is probibly alot of build up to be broken down. I can tell you that there has been no sudden down turn, and to me it looks like I am getting a nice flash of fresh white hairs.
Click to expand...

your plants could easily make your ph change that much in 24 hrs its no big deal. sounds like your doin good. Hygrozyme helped my plants to avoid root rot. 1 was starting to get it and I used that and it started going away. but keeping the water between 62-70 is more important and benificial than hygrozyme. but it does work helps keep the bad stuff at bay and the good stuff growing
 
Hey guys,

I had a terrible case of pythium (caused by a case of over loving with nutes) and after my favorite baby died I ran to the hydro store and picked up hygrozyme & SM-90. After reading countless threads on the possibility of algae production, the first couple of gallons I used to flush were only SM-90 which kills everything off and then the following 6 gallons had hygrozyme mixed in with it.

I crossed my fingers after being told that there was nothing that could save them. Two weeks later the growth stunt has been broken and they are over 3 feet tall.

Due to the severity of the situation I did not risk using each product independently. SM-90 is also killer for bugs because it gives you an alternative to pyrethrum. However, I'm sure some old timers would have a better idea crop after crop of the effects? This was just my experience with it, but I'm impressed =) Oh.. I'm in soil, 400 MH for veg and 400 HPS for flower, 3 gallon pots and I don't know how this applies to hydroponics.


Peace. :leaf:
 
You must log in or register to reply here.

Similar threads

Jimski
POSTING FOR HELP IDEA
Replies
2
Views
166
tstick
tstick
V
Newb needs AC infinity controller 69 pro help
Replies
0
Views
205
vondetour
V
RookieHaze
Is autos worth topping?
Replies
4
Views
392
driver77
driver77
R
Autoflowers and sts. My attempt to self a single plant to get seeds.
Replies
5
Views
468
Raswarriorfari
R
O
Defoliating auto's
Replies
9
Views
454
Jimski
Jimski
Back
Top