growforfreedom1
Well-Known Member
i am in the process of building it now but i need a few more items. i have changed my design a little bit but i havent deviated from the original concept.. the coil from the bottom of the fridge is a bit bigger than i had anticipated. i will use 2 5gal buckets attach the coil to the inside of one with the fluid lines poking out and then tape the 2 together and cut a 4" hole at each end. the top chamber is pulled off first through a fan out the side and into the exchanger. on the opposite (discharge) end of the apparattus you attach another piece of ducting and blow it into the bottom of the chamberit circulates, and is pulled off at the top of the chamber where it will pick up the excess heat of the light that is run inside of a cool tube. i bored five 2 1/8" holes in the side of te fridge where it will pull cool air right off of the concrete block wall of my basement. i bored these holes through the outer shell and not all the way through. on the inside i cut a 4" hole for my ducting. that will hook up to the light tube and vent out the other side. on that side of the fridge i have a 7 foot cabinet which hides all the doodads that make this thing run. i will have pix up soon if i can figure out how to get them on here.