a long time ago we used fresh frozen OD sugar trim and made some sticky wet bubble almost like oil
ICE WAX (bubble hash) with Matt Rize
- Thread starter Matt Rize
- Start date
a long time ago we used fresh frozen OD sugar trim and made some sticky wet bubble almost like oil
Matt Rize
Hashmaster
I've been slowly figuring this out. Keep the dried ice water hash in the fridge, sealed. If properly dried and stored, the hash will remain in its natural granular state for months. Crystallization will begin once the trichomes melt themselves into a natural oil. By keeping the hash in its natural granular state you can press it out into "ice slabs" when needed for dabs. You can then keep your hash long-term, and also avoid the chemical changes that occur with crystallization like oxidation and other degradation.
Matt Rize
Hashmaster
high quality trichome heads, in concentration, will melt themselves into an oil, aka grease. i suspect the terpenoids are acting as an internal solvent to dissolve the heads in the highest quality ice water hash. grease just happens, due to gravity and ambient temperature.
birdmananyweather
Well-Known Member
Mr. Rize has videos in subcools weed report videos of his entire drying process, Even showing his trays in a walk in cooler. Extremely legit and detailed. His process is so meticulous and absolutely perfect. He dries only 2 grams on an entire full size baking tray in a walk in cooler, sacks and stacks of them. You have to see the quantity he has available, to realize how much work he puts in his. If that's not extremely impressive, i don't know what is. Keep up the amazing work Matt, Your shit is phenomenal.
Nitegazer
Well-Known Member
Sure is a strange way of showing how you like the guy. If you really want answers to your questions, I recommend you step back, make an apology and then rephrase your question in a less offensive way.
wicked og
Member
Hey would you be kind enough to post that video I will be making some ice wax tonite and it would be nice to have see an actual ice wax pro drying and curing video I been looking and haven't found any just some bubbleman videos which I kinda understand but another video wouldn't hurt thanks
Matt Rize
Hashmaster
Thank you. You obviously have been paying attention!
Deleted. Its ok.
Check out weednerd 113, its basically my advanced hash class to answer all the stuff not answered in the first video.
greenghost420
Well-Known Member
ok i tested how shit stored n blazed after being in the freezer for a year. now lets see how shit blazes after being in my cigar box stashed away for over a year as well...mmmm not as much flav but still killer head rush. good flav tho and still nice n tan.
Did my first wash of a hp of dry trim today. Not the best material, didn't yield as much as I was hoping still. Pretty disappointed but hopefully I'll get my hands on some more, better trim sometime soon.. think I'm gonna get a better set of bags as well, but we'll see! Thread was a good read, definitely helped me along the way, but I can attest for sure that bad material doesn't get you shit!
Dank Raptor
Active Member
Just watched weednerd 113 tons of good info. I heard you say 15 minutes soak time for dry material but how long do you recommend soaking fresh frozen trim before turning on the machine?
romulanlover
Active Member
q for the melters out there...
this run i didnt shave my ladies legs, and got a bunch of popcorn. should i be busting it up somehow? or just throw the work in as is
this run i didnt shave my ladies legs, and got a bunch of popcorn. should i be busting it up somehow? or just throw the work in as is
oldschooltofu
Well-Known Member
ok, so i have been making bubble wax for a few seasons now and now that i can make it into dabable via the wax paper heated glass method (is there a name for this?) i am so happy i can dab my bubble.
so on to the next step, im a glassblower, so if i made a glass "rolling pin", heated it up with a torch, and rolled a 20-30g pile, would this be a good method to do bulk amounts?
think i might have to go to the shop and make one and try it. should i do solid or hallow? hummm? what size?
so on to the next step, im a glassblower, so if i made a glass "rolling pin", heated it up with a torch, and rolled a 20-30g pile, would this be a good method to do bulk amounts?
think i might have to go to the shop and make one and try it. should i do solid or hallow? hummm? what size?
romulanlover
Active Member
The torched rolling pin could be too hot. The boiling water glass method is nice because there's a easily achievable peak temp and obviously the results speak for themselves
oldschooltofu
Well-Known Member
ok, boiling water.....whatever heat source works best..... whats the perfect temp and has anyone tried doing larger amounts at a time?
Research grown budz
Member
When I have the fresh frozen trim do I let it sit in the mixing bucket with the water and ice or once I put it all in the bucket I begin mixing immediately also once I am done mixing do I let it sit for awhile before taking out the bags?? Someone plz answer my question I read all the pages and I can't find the answer anywhere
yktind
Well-Known Member
Here is the way I do it:
Layer Ice trim, Ice, trim, Ice.
Cover with R.O. water
Let sit for 10 mins ish
Stir for 10 mins (not frantically just a gentle push)
Add ice if needed
Let sit for 10 mins.
Drain Bags
Rinse hash with Ice cold water
Scoop with spoon or whatever out of bag
Add more ice to trim bag (220 micron)
Add water
Repeat process until you are sure there is nothing left.
****Special note*** Do not reuse the water. Use fresh RO water.
You can usually judge how many washes it will take after seeing the 73 micron bag after the first and second washes.
Research grown budz
Member
Thanks a lot man for ur help but I actually just asking Matt rize I have read every single page and now I have a step by step system that is very detailed to Matt rize technique almost to the teeth but I just need one more step to finally complete the process and that is when the mixing bucket has been stirred up with all materials inside do I let it sit at all or just start straining bags don't get me wrong though bro I really appreciate ur help if u have any picks of the wax u made using ur method I would be really grateful to take a look at it and on the 29 th I am going to be making wax actually like on the April 1st I guess cause I gotta let the fresh sugar leaf only freeze
Research grown budz
Member
Matt rize I appreciate everything you do man really glad u let us in on the loop bro anyhow if u could help me out with that question I asked I would really appreciate it man thanks again Matt u are a ice wax making god
yktind
Well-Known Member
Thanks Matt for all the Tips and Tricks.
First batch that I have had glass jars for. And man what a difference a little cure does!
View attachment 3029718View attachment 3029719View attachment 3029720View attachment 3029721View attachment 3029722
First batch that I have had glass jars for. And man what a difference a little cure does!
View attachment 3029718View attachment 3029719View attachment 3029720View attachment 3029721View attachment 3029722
Similar threads
