ICE WAX (bubble hash) with Matt Rize

E

erocoe420

Member
This was one of matt's tips from a site: -Wrap the machine with some kind of insulation. Crucial design flaw. An easy fix is to wrap your machine with one of those car window sun blocks, the shiny 'metal' looking ones.
 
trichmasta

trichmasta

Active Member
That would work...I'm gonna use a flexible, reflective, insulated barrier...looks like something for houses or something!! Would work great in the garden as well!!
 
GrowBrooklyn

GrowBrooklyn

Well-Known Member
I just wrap mine in a large thick beach towel. Works great for insulation, keeps the condensation from making a mess, and it reduces the noise a bit.
 
SpliffAndMyLady

SpliffAndMyLady

Well-Known Member
I really don't see insulation being an issue with my bubble magic 20 gal. If I let it sit 20 minutes before agitating I usually have to break up the ice again before setting it on a spin cycle because the ice freezes to a block, made outdo in Hawaii so it's not from the winter weather.
 
trichmasta

trichmasta

Active Member
I prefer to do washes at night when weather is below 30 f...no chance for anything ever to warm up!! Even in the summer our night temps can get down to the 30 s easy...
 
C

Cannabinoids

Well-Known Member
Any official word on what the humidity and temp should be in the room that the ice wax is drying in?...Im assuming since the process is done cold ten a cool room with a 50-55 humidity range

What is your drying/curing room Temp and humidity set at?

Thanks
 
C

Cannabinoids

Well-Known Member
Found my answer from High Times January 2013 - Wax On, Making Soleventless hash the Nikka T way Story by Ry Prichard

Nikka T on the subject of Drying temp and humidity.

"Also, Keep temperatures in the drying area between 40F and 68F depending on how quickly you want to remove the water (which will vary according to strain), and keep the relative humidity between 15 and 50 percent. there are certain strains were I like to keep the humidity and temps on the higher end of that range to create the appearance desired by the patient or client...." - Nikka T
 
trichmasta

trichmasta

Active Member
Nikka is a G in the game for sure...big ups to essential extracts!! Check out his youtube and appearance on the JDR show!! Some real good iwe knowledge dropped!!

bless
 
Waxy Dabs

Waxy Dabs

Member
If you make ice cubes with reverse osmosis water, they will be cold and hard enough to not need any type of insulation on your machine. Sometimes I wash my leftover cubes until they are clear again and leave them in the bubble magic overnight. Most of it still remains the next morning.

my 2 centavos...Some folks seem to get caught up in the asinine details of this process. Use some common sense and don't think so hard, you'll get it easier.
 
MichiganGrows

MichiganGrows

Active Member
Here is some Spacedawg 73 make from close trim and lowers. I followed most of Matts methods and have been achieving awesome results. Enjoy!!!DSC01260.jpgIMG_0133.jpg
 
G

Gehanee

Member
Matt or would I say Obi One... Lol just signed up to say thanks... My nephew, godson and all the younger card holders just south of u are going bho crazy, catching them selves on fire or messing up there throats smoking bad unperged crap that there friends make what the hell... So recently I was looking into the ins and outs of bho and say your vids on the utube witch lead me to this site and 150 something pages later BOOM (bad choice of words) made my own iwe fallowed the step by step and those young asswipes didn't no what to think they loved it..... Switched them back from the dark side.. THANKS FOR MAKING IT SO EASY A CAVE MAN CAN DO IT
Lol blue elephant full melt
 
T

The Mantis

Well-Known Member
Thanks for the info MR. Greatly appreciated. I bought the small machine and made the best hash i've ever had with cocktail trim sitting my freezer for over 7 months now.

220-120
 
You must log in or register to reply here.
Top