• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

IF you are new to LED and want help choosing what to buy, POST HERE!

Status
Not open for further replies.
REALSTYLES

REALSTYLES

Well-Known Member
Aspiring Grow3r said:
Thats a lot of lights! Any other options? How will the temperature be?
Click to expand...
You can make 8 panels like these but it will run you about $5600 but you can wait like the others said for the A51's new light coming out with the Vero's it would be worth your wild lol.

SAM_0180.JPG SAM_0214.JPG

I have them dimmed right now because it was 90 a few times here in Cali and I need no ac lol for real
 
A

Aspiring Grow3r

New Member
REALSTYLES said:
You can make 8 panels like these but it will run you about $5600 but you can wait like the others said for the A51's new light coming out with the Vero's it would be worth your wild lol.

View attachment 3389389 View attachment 3389390

I have them dimmed right now because it was 90 a few times here in Cali and I need no ac lol for real
Click to expand...
What type of tools do you need to diy? And is there a way you can guide me in the right direction?
 
G

grower7155

Active Member
Hey. I ordered two platinum leds and was able to cancel the shippment after I read some bad things about them on this forum. Thinking about ordering 2 area 51 R150 lights now. I hear area 51 is coming out with new lights soon...think now is a bad time to buy from them?
 
captainmorgan

captainmorgan

Well-Known Member
grower7155 said:
Hey. I ordered two platinum leds and was able to cancel the shippment after I read some bad things about them on this forum. Thinking about ordering 2 area 51 R150 lights now. I hear area 51 is coming out with new lights soon...think now is a bad time to buy from them?
Click to expand...
The RW lights are proven producers and a quality light. The new A51 light is a Vero 2 COB based light and is suppose to be available in June and should have a lower per watt price.
 
T

trx250x7

Well-Known Member
I currently flower in a 7'9" x 11'6" room using about 4' by 11'6" with 3 1kw lights 2 hps and an MH in the middle. with summer coming I would like to replace the middle 1kw with led to help save on cooling exc. I have read allot on leds vs hps but have not came across the best way to mix them. A full 1kw replacement may not be needed due to the overlap of the other lights. I would like to know if any of you have some advice on the best way to replace that one light factoring cost vs quality. It seems like A51 is the way to go and the new COB would be best but I can imagine they will be sold out for months when the new unit is released. I dont mind a little older tech if the price is right.
 
captainmorgan

captainmorgan

Well-Known Member
trx250x7 said:
I currently flower in a 7'9" x 11'6" room using about 4' by 11'6" with 3 1kw lights 2 hps and an MH in the middle. with summer coming I would like to replace the middle 1kw with led to help save on cooling exc. I have read allot on leds vs hps but have not came across the best way to mix them. A full 1kw replacement may not be needed due to the overlap of the other lights. I would like to know if any of you have some advice on the best way to replace that one light factoring cost vs quality. It seems like A51 is the way to go and the new COB would be best but I can imagine they will be sold out for months when the new unit is released. I dont mind a little older tech if the price is right.
Click to expand...
What's your budget and have you considered DIY?
 
T

trx250x7

Well-Known Member
If I could keep it around $800 to $1k I would feel better about the roi. DIY is possible but I have no clue what to buy. if the labor involved worked out to saving more than $20 per hour invested I could go that route. I have read through a few DIY builds and I am capable of doing it. Just not sure on the brands of all the parts exc.
 
captainmorgan

captainmorgan

Well-Known Member
captainmorgan

captainmorgan

Well-Known Member
trx250x7 said:
Thank you for taking the time to help out! I will read over those more closely and see if I can figure it out
Click to expand...
Your welcome,here's a couple thread's you might want to read also. Two ways to power COB's are a separate driver for each COB or a larger driver to power multiple COB's. Larger drivers carry higher voltages and are more dangerous to work with so be careful if you go that route and follow the instructions from knowledgeable members.

https://www.rollitup.org/t/heatsinks-for-diy-led-lamps.851907/

https://www.rollitup.org/t/diy-leds-how-to-power-them.801554/
 
JimmyIndica

JimmyIndica

Well-Known Member
I just bought me a optic Vero29 3K 200 watt. Saved 50 bucks with supras code! I was gonna get the cxa 3k 80 but I only had 470. It was shipped 20 minutes after I ordered it. Can't wait to get hold that baby!!!
 
Last edited:
Status
Not open for further replies.
Top