Ingesting cannabis oil cures cancer and much more!

haight

haight

Well-Known Member
That cure won't work without a lipid. Best to boil a rattlesnake and skim off the oil as it rises to the surface. This then therefore can be added to the solution. The resulting concoction can then be sold along with Carter's little liver pills to cure most anything.
 
RC7

RC7

Well-Known Member
cannabineer said:
"Naphtha" is an imprecise term. In the USA it refers to kerosene fractions that boil higher than 200 degrees Celsius. There is no way to remove those from an extract without also burning off the useful components.

In Europe and elsewhere "naphtha" generally means the lighter fractions, pentanes and hexanes, that are better but not ideal extractants for Cannabis. But for Rick to recommend "naphtha" is criminal.
Click to expand...
I personally recommend using isopropyl alcohol or 99% alcohol but using the proper solvents can also be safe.

RICK SIMPSON OIL SOLVENTS 101
"It should be light aliphatic Naphtha (Petroleum Ether in US, 1520 Naphtha, VM&P Naphtha, check MSDS if it's pure light Naphtha NO additives) Shellite in Australia, (technical) Benzine in Europe (NOT benzene). Boiling point around 80°C. Smear in Petri dish or dip a finger and if it evaporates within 30 seconds and leaves no oily residue usage should be okay. Currently with many suppliers I can't tell you which one is best or what we'd recommend so we only provide general instructions. If possible CAS number 64742-49-0 pure with no additives most refineries produce it. 2nd option: 99% or 99.99% Isopropyl alcohol or the very expensive 99% food-grade alcohol. Isopropyl alcohol and food-grade alcohol aren't as effective as Naphtha and strip more plant materials and chlorophyll in the oil making it LESS potent and tasteful that is why we recommend using Naphtha always when possible/available."
 
RC7

RC7

Well-Known Member
Try reading the information and watching the video links posted guys and you will see its not bullshit. There are many testimonials and the science is all there.
 
curious2garden

curious2garden

Well-Known Mod
Staff member
RC7 said:
Try reading the information and watching the video links posted guys and you will see its not bullshit. There are many testimonials and the science is all there.
Click to expand...
That is not scientific literature. It is mere anecdotal evidence which does not rise to the level of scientific proof. If you wish to make this case you need to go to graduate school in science and get back to me with actual proof. Until then proffering anecdote as scientific proof demonstrates your inability to recognize your own ignorance in the subject.
 
cannabineer

cannabineer

Ursus marijanus
RC7 said:
I personally recommend using isopropyl alcohol or 99% alcohol but using the proper solvents can also be safe.

RICK SIMPSON OIL SOLVENTS 101
"It should be light aliphatic Naphtha (Petroleum Ether in US, 1520 Naphtha, VM&P Naphtha, check MSDS if it's pure light Naphtha NO additives) Shellite in Australia, (technical) Benzine in Europe (NOT benzene). Boiling point around 80°C. Smear in Petri dish or dip a finger and if it evaporates within 30 seconds and leaves no oily residue usage should be okay. Currently with many suppliers I can't tell you which one is best or what we'd recommend so we only provide general instructions. If possible CAS number 64742-49-0 pure with no additives most refineries produce it. 2nd option: 99% or 99.99% Isopropyl alcohol or the very expensive 99% food-grade alcohol. Isopropyl alcohol and food-grade alcohol aren't as effective as Naphtha and strip more plant materials and chlorophyll in the oil making it LESS potent and tasteful that is why we recommend using Naphtha always when possible/available."
Click to expand...
I personally recommend not proselytizing something about which you have now shown you know nothing.

VM&P naphtha is a mix of higher-boiling n-, iso- and cycloalkanes (aka naphthenes) with an unacceptable boiling range. As @Singlemalt pointed out; your use of an imprecise term parading as technical ... exposes you as a poseur.

I will not even begin to discuss your choice of alcohols as extraction media. I have no inclination to cast my professionally-verified pearls before yet another opinionated and stubborn swine.
 
Gary Goodson

Gary Goodson

Well-Known Member
curious2garden said:
That is not scientific literature. It is mere anecdotal evidence which does not rise to the level of scientific proof. If you wish to make this case you need to go to graduate school in science and get back to me with actual proof. Until then proffering anecdote as scientific proof demonstrates your inability to recognize your own ignorance in the subject.
Click to expand...
098AA9BC-B05F-4818-8F66-D8834CB4F6F4.gif
 
chemphlegm

chemphlegm

Well-Known Member
RC7 said:
I personally recommend using isopropyl alcohol or 99% alcohol but using the proper solvents can also be safe.

RICK SIMPSON OIL SOLVENTS 101
"It should be light aliphatic Naphtha (Petroleum Ether in US, 1520 Naphtha, VM&P Naphtha, check MSDS if it's pure light Naphtha NO additives) Shellite in Australia, (technical) Benzine in Europe (NOT benzene). Boiling point around 80°C. Smear in Petri dish or dip a finger and if it evaporates within 30 seconds and leaves no oily residue usage should be okay. Currently with many suppliers I can't tell you which one is best or what we'd recommend so we only provide general instructions. If possible CAS number 64742-49-0 pure with no additives most refineries produce it. 2nd option: 99% or 99.99% Isopropyl alcohol or the very expensive 99% food-grade alcohol. Isopropyl alcohol and food-grade alcohol aren't as effective as Naphtha and strip more plant materials and chlorophyll in the oil making it LESS potent and tasteful that is why we recommend using Naphtha always when possible/available."
Click to expand...

Scientific Fact?

"Dip a finger in it....watch your stop watch for 30 seconds, if it evaporates...should be good enough"(but, to cure cancer?)

please explain first why you reported my first post?
Please explain secondly how a dying cancer patient can remove all of this naptha solvent?

sounds like the recipe for the Dispensary Diarrhea Syndrome
 
Last edited:
RC7

RC7

Well-Known Member
chemphlegm said:
Scientific Fact?

"Dip a finger in it....watch your stop watch for 30 seconds, if it evaporates...should be good enough"(but, to cure cancer?)

please explain first why you reported my first post?
Please explain secondly how a dying cancer patient can remove all of this naptha solvent?

sounds like the recipe for the Dispensary Diarrhea Syndrome
Click to expand...
I didn't report your post. Again using alcohol as a solvent produces a very safe and effective oil.
 
RC7

RC7

Well-Known Member
cannabineer said:
I personally recommend not proselytizing something about which you have now shown you know nothing.

VM&P naphtha is a mix of higher-boiling n-, iso- and cycloalkanes (aka naphthenes) with an unacceptable boiling range. As @Singlemalt pointed out; your use of an imprecise term parading as technical ... exposes you as a poseur.

I will not even begin to discuss your choice of alcohols as extraction media. I have no inclination to cast my professionally-verified pearls before yet another opinionated and stubborn swine.
Click to expand...
Using alcohol as a solvent produces a very safe and effective oil. I don't recommend naphtha as stated and most of the videos show alcohol being used. Thanks for the derogatory comment, you don't offend me lol. You clearly have no knowledge on the healing power of cannabis oil like the rest in this thread. Great job representing the cannabis community.
 
chemphlegm

chemphlegm

Well-Known Member
RC7 said:
I didn't report your post. Again using alcohol as a solvent produces a very safe and effective oil.
Click to expand...
fair enough, can you explain how a dying cancer patient can be assured there is no solvent remaining in his rice cooker/naptha/alcohol oil cure before ingesting it ?
 
tyler.durden

tyler.durden

Well-Known Member
RC7 said:
Using alcohol as a solvent produces a very safe and effective oil. I don't recommend naphtha as stated and most of the videos show alcohol being used. Thanks for the derogatory comment, you don't offend me lol. You clearly have no knowledge on the healing power of cannabis oil like the rest in this thread. Great job representing the cannabis community.
Click to expand...
Dude, it's over. After Barnbuster posted your 9/11 quote, no one here is going to take you seriously. I hope you enjoyed your time in TNT, and I hope is was as good for you as it was for us...
 
G

gb123

Well-Known Member
I'm still here 7 years after recurrent stage 4 colon cancer that metastasized to my liver and outside my colon as well..(:

YERP.....Its all dead. Has been for quite a few years.
I still eat this stuff daily and eat well too.

keep on eatin all! this shit is a cancer killer. NOT CURE!
Don't stop at a gram a day..keep on goin! Its easy once yer at a gram a day..Just don't green out on your way up or ya may not wanna keep doin it...Take it slow.. ;)


ps...I started makin my meds with white gas,,,, Naphtha :)
I just started pressin it out instead!
 
G

gb123

Well-Known Member
chemphlegm said:
fair enough, can you explain how a dying cancer patient can be assured there is no solvent remaining in his rice cooker/naptha/alcohol oil cure before ingesting it ?
Click to expand...
the thing is..we used to freak out at the thought of dirty oil..but we smoked hash from the other side of the world and BIT chunks off with our mouth, with out a second thought...
you get more cleaning solvent off the table of MacDonald's than you would off or out of oil made at home.. way less actually. I wouldn't buy it from anyone though
 
You must log in or register to reply here.
Top