i have those... theyre ok. cheap but the base is thin so not as ideal as some of the thicker models. for much over say 30W/chip they are prob better used as actives with fans right over each cob
chips = same day or next dayHow long are orders taking to process?
just turn the current pot all the way clockwise. look at teh test report, not the datasheet, its more realistic. all the meanwells are underspec'dhey @CobKits the data page for the MeanWell HLG-120H-48A Driver says max 2.5, but you mention it will output 2.95A max current. How? Must i press a button?
Trying to figure out the cooling for running 2 Luminus on that driver.
If the max is 2.5 then i can safely use a 120MM, but if it's 2.95 i gotta get something with more cooling.
just turn the current pot all the way clockwise. look at teh test report, not the datasheet, its more realistic. all the meanwells are underspec'd
it will adjust voltage from ~44V to ~53V, which will have an effect with 1818 but not with 1212 (as every position on there is above the cob operating voltage, it cant limit it to dim itWhat is the other pot for? It didn't seem to do anything.
Thanks, though I couldn't seem to find the chips on your site only the cmx22's. Do you have the cxm32's in stock?4x cxm32 on an hlg-320h-c1400 driver