Godfather420
Well-Known Member
do your thing! but lets try to hash this out tonight on my thread. Trying to pin down the best solution so i can get all the heatsink drilled and tapped while I wait. Got 500+ holes to tap by hand....lol
Introducing CobKits.com - specializing in DIY and Citizen COBs
PCXV
Well-Known Member
Just asking for an estimated lead time from now. That's a kind offer, but I didn't mean to express any dissatisfaction.
CobKits
Well-Known Member
no sorry, its bs to make you wait longer than you signed up for. I took all the engines down for now till i can get caught up. thursday is a big big day for me. sink or swim so to speak on things larger than cobkits. im feeling better now, almost 100%. non-custom orders are going out quickly again. if it would only stop snowing and once i get past thurs things will hopefully be back to "normal". I havent had the luxury recently of "let it snow ill stay home and work on leds" but i hope to have that option soon.
shadow_moose
Well-Known Member
Can we get the engines un-assembled for a slightly lower price normally or is that a one time dealio for this dude?
PCXV
Well-Known Member
OK thanks, I will stay tuned.
qballizhere
Well-Known Member
why not use self tapping screws
Godfather420
Well-Known Member
touche! Come join me over at my thread.. Maybe you can help shed some light on led selection and driver choice....I'm one of those types that has a hard time pulling the trigger...That'll help take a lil niblet off COBKITS plate.
shadow_moose
Well-Known Member
That's still $30 saved for a 300W light! Thanks for the info my dude, defo going with some CXM22s to build up my new breeding facilities once I get the capital. Gonna be looking at two 4x4 spaces for breeding chambers. Probably two 16 module lights, 880 watts max each on 4 HLG-185h-48A drivers per fixture. I'd be looking at about $1470 after discount, right? Any further discount for an order of that size?if you priced out parts it would be ~$5 cheaper. $39.50 for chip+sink+holder. not getting rich on these
bleak
Well-Known Member
Hi @CobKits, my light engines arrived last week, and are running smoothly for a few days already. Thanks again!
Quick question - the dimmer on the power supply has 2 adjusters (labelled Vo adjust and Io adjust). Both of these affect the brightness so I'm a bit unsure how to use them. What is the difference between the two adjusters, and how should they be balanced?
Quick question - the dimmer on the power supply has 2 adjusters (labelled Vo adjust and Io adjust). Both of these affect the brightness so I'm a bit unsure how to use them. What is the difference between the two adjusters, and how should they be balanced?
licoricetree
Well-Known Member
You will need a multimeter cause u messed with the voltage adjustment but the lo adj is what you wanna use to dim them the lights. Lo adj affect amps
licoricetree
Well-Known Member
What watt driver you have?Max forward voltage for the cxm-22 is 55v but lets say 54v. If you are using hlg-185-48 then the max voltage on the driver is 53v. So you should be ok. But per the cxm-22 it has a 50v min so i wouldn't go lower then that.
DesertHydro
Well-Known Member
ive looked just about everywhere. even direct from china after shipping and everything most places are within a few bucks of each other unless youre ordering a whole lot of them and picking up at the port. the only reason to go outside the box and order from a non sponsor is if they just dont have it or back ordered etc. i just looked at some of my save quotes from alibaba and the drivers were within $2-20 of what the vendors sell them for but after international shipping you are paying the same if not more on small orders.
i got a nice quote for heatsinks until i saw the shipping was $185 for 32 of them
which put them at the same exact price as most vendors.
i got a nice quote for heatsinks until i saw the shipping was $185 for 32 of them
which put them at the same exact price as most vendors.
nevergoodenuf
Well-Known Member
CDIweb.com
Similar threads
