how do you feel about mixed systems? For example:
1 2 1
2 2 2
2 2 2
1 2 1
Where 1s are 80s directly above plants and 2s are 90s. More blue spectrum directly over for veg/more red as plant spreads for flower.
Introducing CobKits.com - specializing in DIY and Citizen COBs
1 2 1
2 2 2
2 2 2
1 2 1
Where 1s are 80s directly above plants and 2s are 90s. More blue spectrum directly over for veg/more red as plant spreads for flower.
haze010
Well-Known Member
The dawg already did this experiment but with citi 1812's
https://www.rollitup.org/t/dhp-presents-citizen-cob-1812-3500k-80cri-vs-1812-3500k-90-cri.932990/
For that particular cob, 90cri was the clear winner for flowering (they were vegged exactly the same).
CobKits
Well-Known Member
thats an ledil angelina 13838, same as the ones for clu048,cxb3590, and vero29
if its hard mounted you see is a tight fit but easy mod, you jsut need to releive the reflector where the solder joints are and drill holes for mounting. that same reflector can also be mated to a cxb ideal adapter or vero 29 adapter but it create a "step" like a cylindrical well that the chip sits down in if that makes sense. of the latter 2 options the vero is better but its A LOT of dremeling. the holder gets dremeled out to the diameter of the LES and then the whole holder gets planed on the bottom. advantage being removable reflector. i dont think im making any more of those until i see if i can do it with the cnc mill
if its hard mounted you see is a tight fit but easy mod, you jsut need to releive the reflector where the solder joints are and drill holes for mounting. that same reflector can also be mated to a cxb ideal adapter or vero 29 adapter but it create a "step" like a cylindrical well that the chip sits down in if that makes sense. of the latter 2 options the vero is better but its A LOT of dremeling. the holder gets dremeled out to the diameter of the LES and then the whole holder gets planed on the bottom. advantage being removable reflector. i dont think im making any more of those until i see if i can do it with the cnc mill
CobKits
Well-Known Member
im aware, that was two separate rooms not one room with 4 80cri in the corners
haze010
Well-Known Member
Ok! was just trying to be helpful. Keep up the good work cobkits
haze010
Well-Known Member
Yup its all good man, i know so many morons and trolls make ppl have their defensive up. Im quickly learning for every 1 legit reply around here you get 4 straight trolls and 3 ppl who in their head are trying to help but just muddy the waters with verbal diarhea. lol.
haze010
Well-Known Member
Yes, one for each troll and verbal diarrhea. It can be a fun game to post a question you know is going to turn into a retarded argument where fools try and flaunt the size of their e-penis and turn it into a bong ripping game, lol.
Edit: sorry if i distracted your thread, ill move along! and props to you again.
Manfromthenorth
Well-Known Member
I am guilty of verbal diarrhea I try to help but I'm still new lol.
SuperHI TnT
Well-Known Member
Hey cobby, how hot is the 36v driver I bought from you supposed it run? It's hot and I just want to know if that's normal
These ideal connectors work AWESOME for my copper wiring.
However, the aluminum stranded that come off the meanwell drivers, don't want to push in. Will the Wago connectors work better for this? They're hard to find locally but I can order.
My solder gun won't get hot enough to solder this. It's a cheap old one. It's a 30w Craftsman 113.540410
However, the aluminum stranded that come off the meanwell drivers, don't want to push in. Will the Wago connectors work better for this? They're hard to find locally but I can order.
My solder gun won't get hot enough to solder this. It's a cheap old one. It's a 30w Craftsman 113.540410
Last edited:
CobKits
Well-Known Member
which driver? 185-36A?
all of them are rated for full life at 70C. if you can keep your hand on it its less than 70C. airflow never hurts electronics tho
So it's okay to use a 3 pole wago to connect the aluminum stranded leads of the 2 meanwell driver to a copper stranded extension cord?
They'll all be used. 2 driver leads and a extension cord lead.
I just wasn't sure if the Wago connectors are rated for aluminum wire connecting to copper wire