is 3 foot tall enough for a cabinet

coltsfanky79

coltsfanky79

Well-Known Member
Ill b using cfls and perhaps a bigger metal halide bulb for flowering. Ill be using bagseed and just doing a personal grow.... is 2 ft wide x 3 ft tall enough to get a finished product? Ill probably be using an AG to grow for the most part...im using osb board 1/2 inch thick. Then im gonna cover it with some valspar latex white inside and out. Any suggestions would be appreciated
 
ToketheSmoke.com

ToketheSmoke.com

Active Member
yeah man topping LST whatever u can do

i had 5 ft of height space thot i was waaayyy in the clear but my plant is 4 and a half feet now barley enuf room for the light

just kno they can grow unexpectedly

good luck man:peace:bongsmilie
 
NoSaint

NoSaint

Well-Known Member
I've got 3 super skunks budding now that I have been able to keep under 3'...Two are just barely under, but under.

If its all you have, it will have to work
 
Perfextionist420

Perfextionist420

Well-Known Member
you can probably do it but i dont know for sure about using the mh lamp because an hid in a small confined space like that will shoot temps through the roof
 
OregonMeds

OregonMeds

Well-Known Member
That link I gave, in his sig you will find a smaller cfl cab grow in the same manner where he grew quite a bit of weed in a tiny cabinet like that with only 5 42w cfl's.
 
daveof59

daveof59

Well-Known Member
i've got my grow height at around 2 1/2 or 3 foot. Its a tight fit to say the least. As the other fellow said lst it man i'm trying to but do it before the stems get too strong
 
coltsfanky79

coltsfanky79

Well-Known Member
hell yeah, thanks a ton! I thought about a scrog still might go that way. Ill recheck that link the stuff i seen on it a min ago was awesome ill check his sig. I think i fucked up using osb board. I just need to get some better screws to bring it all together, or nails. Ill take pics when the mystery box is complete.
 
You must log in or register to reply here.
Top