Is there canned butane w/o propane and iso butane?

Kite High

Kite High

Well-Known Member
crazyhazey said:
After doing more and more research on BHO it seems "filtered" or "refined" doesn't have too much of an effect on the product but rather the iso butane and propane contents(ive also been hearing sulfur is added to most cans so they give off a smell if they are leaking). Ive looked through most companies and it looks like XIKAR(ive heard it left the least residuals when mirror tested) may be one of the cleanest out there, though i haven't looked into almost every butane company so don't take my word, hell i cant even find it down here so id probably be forced to order an entire case before knowing how my products gonna turn out. It also seems like the companies that come out of Korea seem to be less reliable and more tainted with impurities. So is there canned butane w/ mostly N-butane content out there or am i going to be forced to buy a tamisium extractor to do pure N-butane runs? Thanks everyone, +rep for any help, sources are appreciated.
Click to expand...
go to airgas or somewhere similar and request a new 5# tank filled with food grade n-butane ....affordable and outstanding results...but why would you not at LEAST use a tamisium setup? btw one can be more feasibly constructed from chem glassware for such purposes pretty cheaply...advice though...do not order/purchase it all from the same vendor
 
crazyhazey

crazyhazey

Well-Known Member
Kite High said:
go to airgas or somewhere similar and request a new tank filled with n-butane ....affordable and outstanding results...but why would you use at LEAST use a tamisium setup? btw one can be more feasibly constructed from chem glassware for such purposes pretty cheaply...advice though...do not order/purchase it all from the same vendor
Click to expand...
no shit? i was wondering if there was a cheaper tamisium setup out there. ill look into, any suggestions where to start? thanks for the tip kite high, always grateful for your knowledge man.
 
stumps

stumps

Well-Known Member
I think the last time I sourced it. It was at air gas. Seems it was around 300.00 for #5. might have been looking at the #27.
 
W

waximus aurelius

Member
its exp shit...it costs about twice as much as a master case...but def better...should yield better..
someone looking for a much cheaper alternative to tami..
(wout the 2 hr reclaim process)
concentrateindustries.com

i just got my direct feed manifold for the big gun i use
boom sound
 
Dan Kone

Dan Kone

Well-Known Member
match box said:
I think victor (not sure on spelling) it one of the best. I don't think you are going to find anything that is pure. match
Click to expand...
vector is 11% propane. Newport is the correct answer to this question. If you try to do a run with newport it will immediately answer all your questions. super legit.
 
oilmkr420

oilmkr420

Active Member
They don't simply vanish or elude your lungs once you take a hit. The thing that's nasty is the one carbon molecule that remains after combustion. Isobutane is way cleaner and due to how it's arrangements are bonded, it has a more complete combustion. N-butane is "normal" butane. Iso is the best but can only be found in propane butane mixes where it's only a mixture of about 25% when obtained in small cans of Ronson. Its so noticably better when used. The taste is much fresher w isobutane I've become a enthusiast about they're product. Higher concentrations of isobutane can be found in the more expensive camping type mixes which are available in the little cans and are not the value type 4 packs for $7. That type can also provide really good stuff w a not so pleasant taste.
stumps said:
impurities gas off with the butane very little of anything is left. I myself like the butane method.
Click to expand...
 
crazyhazey

crazyhazey

Well-Known Member
Fadedawg said:
Here is a picture of a Lil Terp long side a TE-175 and the results of a 1 hour 45 minute run. Both n-Butane and Isobutane work well in it, as did Lucienne.
Click to expand...
how much do those yield? and did you have pure n-butane and isobutane?
 
crazyhazey

crazyhazey

Well-Known Member
Dan Kone said:
vector is 11% propane. Newport is the correct answer to this question. If you try to do a run with newport it will immediately answer all your questions. super legit.
Click to expand...
been hearing good stuff about newport, cant find a place that carries it yet though. im gonna look for more cigar shops.
 
HungryMan420

HungryMan420

Well-Known Member
Im good on NewPort they hide things that are in there Butane if you want the Best butane I have done all the research on every type of Butane and read every MSDS SHeet for Most of them sum will not release there MSDS sheet But the Best out is Lucienn Butane it is 95% N-Butane and only contains less than 12ppms the Second Best is Dodo its 15ppms.. Just thought i would post my findings to my fellow BHO lovers!! Peace
 
Fadedawg

Fadedawg

Well-Known Member
Yield is in the neighborhood of 20% for prime bud and 10% for trim. The picture posted, was using Lucienne, which is what we use when we are out of instrument grade n-Butane.
 
You must log in or register to reply here.
Top