Is this light stress? :(

Adi1989

Active Member
Thanks for the help mate, I havent gone over 27c though

Also I watered a few times since and they are still the same so I dont think its under watering.

I did setup the Ozone at night, I was thinking it could be the lack of oxygen in the nighttime? As Ozone depeltes the air of oxygen, its also a sealed room
 

osowhom

Well-Known Member
Hi guys does this look like light stress?
a lot of guys make it look so easy but so many things can go wrong its best to keep it simple i see either deficiency or toxicity in one of your pcs with the leaf edges turning rust colored for 1
 

Adi1989

Active Member
That rust was over feeding the Ppm got up to 2000 and burned the tips a few weeks ago then I flushed them so brought the ppm back down. :)
 

Adi1989

Active Member
I have 288 Quantum boards 24" above the canopy, 8 single boards (1000w of light spread out over a 3m x 3m area 9sq meter area.

What are you feeding them at? 700ppm pH? 5.8
 

Adi1989

Active Member
Yeah about 3 meters x 3 meters so 9sq meters floor space,

Ozone at night not co2 haha

Co2 is off at night
 

Adi1989

Active Member
1 gram per gallon of Epsom Salts. If you have 9m or 98 sqft of grow space you are 2430 watts short of light. Your issue isn't light stress especially 2 ft away from the plants.
Thanks mate, do you put one gram in every feed? I am feeding every 3 days at the moment.
I find Epsom salts doesnt really dissolve in water so I use boiling water to dissolve it, but then I do find after it starts to go solid again.

So maybe Epsom salts because it gets solid again over time can build up too much in the medium?
 

twentyeight.threefive

Well-Known Member
Thanks mate, do you put one gram in every feed? I am feeding every 3 days at the moment.
I find Epsom salts doesnt really dissolve in water so I use boiling water to dissolve it, but then I do find after it starts to go solid again.

So maybe Epsom salts because it gets solid again over time can build up too much in the medium?
I make a 5 gallon bucket of nutrient solution. It includes a ratio of:

A/B/Epsom
3.6/2.4/1.1

My Epsom Salts dissolve immediately in cold/cool water. It shouldn't become solid after. Not sure what you are using for nutrients but they may need to be mixed in a specific order, I do.
 
Top