Moflow
Well-Known Member
£140 or 3/4 of an Ounce in these parts for a 720 Watt led grow light.
Where would you get it.
It should be ok for a 4ft x 4ft area. 1.2m x 1.2m
6 bars
2508 diodes
2488 white
20 reds
Driver is a 600 Watt digital HPS ballast with 660 watt, 600 Watt, 400 Watt and 250 watt setting.
660 Watt setting = 715 watts on kilowatt meter.
600 Watt setting = 661 watts on kilowatt meter
400 Watt setting = 508 watts on kilowatt meter
250 Watt setting = 344 watts on kilowatt meter
4000K whites with 660nm reds.
I took a couple of par readings in a non reflective open space at 12" - 300mm away directly under the fixture.
Big numbers are at 660 Watt setting on ballast
Small numbers are at 250 Watt setting on ballast
As for efficiency, not sure. They say With a PPF of 1800 μmol/s and a fixture efficiency of 2.5 μmol/J
Only time will tell if it blows up! lol
I also tried it with a 250 Watt digital HPS ballast. It reads 271 watts.
Centrer reading was 500 on apogee par meter at 1ft - 300mm away.
Enjoy!
Where would you get it.
It should be ok for a 4ft x 4ft area. 1.2m x 1.2m
6 bars
2508 diodes
2488 white
20 reds
Driver is a 600 Watt digital HPS ballast with 660 watt, 600 Watt, 400 Watt and 250 watt setting.
660 Watt setting = 715 watts on kilowatt meter.
600 Watt setting = 661 watts on kilowatt meter
400 Watt setting = 508 watts on kilowatt meter
250 Watt setting = 344 watts on kilowatt meter
4000K whites with 660nm reds.
I took a couple of par readings in a non reflective open space at 12" - 300mm away directly under the fixture.
Big numbers are at 660 Watt setting on ballast
Small numbers are at 250 Watt setting on ballast
As for efficiency, not sure. They say With a PPF of 1800 μmol/s and a fixture efficiency of 2.5 μmol/J
Only time will tell if it blows up! lol
I also tried it with a 250 Watt digital HPS ballast. It reads 271 watts.
Centrer reading was 500 on apogee par meter at 1ft - 300mm away.
Enjoy!