Its a mutant!!!!!

Woomeister

Woomeister

Well-Known Member
Secret Jardin said:
I would bet anything in the world that we will NEVER see any pics of this hamster. My money is on tomorrows thread saying Update!! Mother hamster ate my 2 headed mutant while I was sleeping.


Not trying to be a bitch it's just my opinion. The only reason I say this is because he say's he knows nobody with a camera that's able to upload pics on the web, yet he and his father have 2 eBay shops that they run. and It is kinda hard to have an eBay shop with out being able to upload pics of what you are selling.

I apologize if I offended anyone, Flame on.
Click to expand...
Stalker alert. My father lives over 100 miles away from me, I do have a camera it is a very expensive Eos 500. If you know what that is then you will know why there are no pics. I dont do flames....I have nothing to prove.:-P Also when you are only selling iphone unlocks etc the pics are provided!!!
 
Woomeister

Woomeister

Well-Known Member
TrynaGroSumShyt said:
https://www.rollitup.org/advanced-marijuana-cultivation/60994-cloning-fan-leaves.html

never upped the pics either.. can anybody say "compulsive liar" .
Click to expand...
I could just say that you are a useless noobie grower with no credentials on this site, but i wont....If you have any botanical or horticultural expertise its not fucking difficult.

Many resources on cloning plants sometimes refer to "plant cuttings," but don't explain the many ways that this can be done. There is real single way to cut plants. In fact, since virtually all of the cells in a plant can create every part that a plant needs to survive, a clone can be made from almost any of the plant's vegetation.

Here are the four kinds of cuttings.
Stem Cutting
Just as its name implies, stem cutting involves taking a stem from the plant to make a clone. Stem cutting is perhaps the most popular cutting method for cloning plants in hydroponics. A stem cutting should be a couple inches in length and have a few healthy, large leaves to maximize photosynthesis. Make certain to keep the leaves of stem moist as it starts to take root.
Leaf Cutting
In this type of cutting for cloning plants, the leaf blade itself is used to create a new plant. Usually, the cut leaf doesn't become a part of the new plant.
If the plant you are growing has particularly thick leaves, you can cut open the veins of the leaf and plant it flat into the growing medium, making sure to keep the cut leaf exposed to light and moisture. After a short period of time, new plants may begin to form where the leaf was cut open. The cut leaf will eventually dry up and rot away, even as the young plants thrive.
Another technique sometimes used is to take older, larger leaves and cut them into triangles, making sure each piece contains a large vein. The edges of the leaf, which usually contains no veins, should be thrown away. The triangles are then planted in the medium with the pointy side down. A new plant can then develop from the vein.
Be aware, however, that leaf cutting is very delicate, and only works with plants that are easily cloned.
Leaf-Bud Cutting
This type of cutting is made up of a leaf blade, petiole, and a short piece of the stem with an attached bud. Leaf bud cuttings are best of species that are able to create roots but not shoots from cut leaves. This method works best when you have a healthy plant, but have very little cloning material to work with because it maximizes the propagating material.
Root Cutting
Propagation by cutting a parent's plant's roots is very simple, because there is less concern of the roots taking hold. However, it is not as popular because many gardeners don't want to harm the roots of their plants.
Obviously, the thicker and healthier the root, the greater the chance of success. Roots should be two or three inches in length, and planted right side up in the growing medium. Many growers choose to cut the side that is supposed to face upwards with a straight cut and the side that is supposed to face downwards with a diagonal cut so that they do not accidentally plant it wrong. No matter what kind of cutting you choose for cloning plants, make certain to use a quality rooting gel to stimulate the formation of new roots.

The amount of info on this is abundant. the reason people dont bother is they give up too early. The above is off a hydro site and is only one method.....
 
Woomeister

Woomeister

Well-Known Member
A respected members of other site agree.VapedG13

Registered+
Join Date: Oct-25-2008
Posts: 678
My Mood:





yep you can clone a leaf and it will grow into a plant...
if your lucky


VapedG13

Registered+
Join Date: Oct-25-2008
Posts: 678
My Mood:





yep you can clone a leaf and it will grow into a plant...
if your lucky
 
TrynaGroSumShyt

TrynaGroSumShyt

Well-Known Member
Woomeister said:
I could just say that you are a useless noobie grower with no credentials on this site, but i wont....If you have any botanical or horticultural expertise its not fucking difficult.

Many resources on cloning plants sometimes refer to "plant cuttings," but don't explain the many ways that this can be done. There is real single way to cut plants. In fact, since virtually all of the cells in a plant can create every part that a plant needs to survive, a clone can be made from almost any of the plant's vegetation.

Here are the four kinds of cuttings.
Stem Cutting
Just as its name implies, stem cutting involves taking a stem from the plant to make a clone. Stem cutting is perhaps the most popular cutting method for cloning plants in hydroponics. A stem cutting should be a couple inches in length and have a few healthy, large leaves to maximize photosynthesis. Make certain to keep the leaves of stem moist as it starts to take root.
Leaf Cutting
In this type of cutting for cloning plants, the leaf blade itself is used to create a new plant. Usually, the cut leaf doesn't become a part of the new plant.
If the plant you are growing has particularly thick leaves, you can cut open the veins of the leaf and plant it flat into the growing medium, making sure to keep the cut leaf exposed to light and moisture. After a short period of time, new plants may begin to form where the leaf was cut open. The cut leaf will eventually dry up and rot away, even as the young plants thrive.
Another technique sometimes used is to take older, larger leaves and cut them into triangles, making sure each piece contains a large vein. The edges of the leaf, which usually contains no veins, should be thrown away. The triangles are then planted in the medium with the pointy side down. A new plant can then develop from the vein.
Be aware, however, that leaf cutting is very delicate, and only works with plants that are easily cloned.
Leaf-Bud Cutting
This type of cutting is made up of a leaf blade, petiole, and a short piece of the stem with an attached bud. Leaf bud cuttings are best of species that are able to create roots but not shoots from cut leaves. This method works best when you have a healthy plant, but have very little cloning material to work with because it maximizes the propagating material.
Root Cutting
Propagation by cutting a parent's plant's roots is very simple, because there is less concern of the roots taking hold. However, it is not as popular because many gardeners don't want to harm the roots of their plants.
Obviously, the thicker and healthier the root, the greater the chance of success. Roots should be two or three inches in length, and planted right side up in the growing medium. Many growers choose to cut the side that is supposed to face upwards with a straight cut and the side that is supposed to face downwards with a diagonal cut so that they do not accidentally plant it wrong. No matter what kind of cutting you choose for cloning plants, make certain to use a quality rooting gel to stimulate the formation of new roots.

The amount of info on this is abundant. the reason people dont bother is they give up too early. The above is off a hydro site and is only one method.....
Click to expand...

u could call me a noob that knows nothing.. that means you havnt seen my journal..

u can clone a leafe sure, but without a part of a node, it will just be a leaf, pointless.. no bud.. just 1 leaf with roots..
 
TrynaGroSumShyt

TrynaGroSumShyt

Well-Known Member
Woomeister said:
just remember the earth was flat once wasn't it.:bigjoint: Good luck with all your grows and learn some diplomacy skills before you try and attack what you havent seen or heard.
Click to expand...
im not attacking you at all, im just calling your bluff hoping that you up some pics. it is pointless to say im attacking hat i havnt seen or heard. when u havnt uploaded anything for me to see. obviously u have no life so u have to make up lies to other members of the board.. and not regular lies either.. stupid shit like to headed hamsters and leaves that produce bud..or that your dad is secretly buying 10 600 watt bulbs so he can grow and be a drug dealer, that you noticed being nosey in his ebay account to the ebay store you own without a cam that can post pics.

c'mon woo.. either post pics .. or stop posting
 
Secret Jardin

Secret Jardin

Well-Known Member
TrynaGroSumShyt said:
im not attacking you at all, im just calling your bluff hoping that you up some pics. it is pointless to say im attacking hat i havnt seen or heard. when u havnt uploaded anything for me to see. obviously u have no life so u have to make up lies to other members of the board.. and not regular lies either.. stupid shit like to headed hamsters and leaves that produce bud..or that your dad is secretly buying 10 600 watt bulbs so he can grow and be a drug dealer, that you noticed being nosey in his ebay account to the ebay store you own without a cam that can post pics.

c'mon woo.. either post pics .. or stop posting
Click to expand...

Well said.


hjksd
 
skiskate

skiskate

Well-Known Member
TrynaGroSumShyt said:
im not attacking you at all, im just calling your bluff hoping that you up some pics. it is pointless to say im attacking hat i havnt seen or heard. when u havnt uploaded anything for me to see. obviously u have no life so u have to make up lies to other members of the board.. and not regular lies either.. stupid shit like to headed hamsters and leaves that produce bud..or that your dad is secretly buying 10 600 watt bulbs so he can grow and be a drug dealer, that you noticed being nosey in his ebay account to the ebay store you own without a cam that can post pics.

c'mon woo.. either post pics .. or stop posting
Click to expand...
hahaha did you really just tell him to stop posting unless he posts pics? Why are you on his balls so damn much. If he doesnt have a digital camera then pictures arent going up I guess..... Big whoop. If you think hes lieing then get the fuck out of his threads and stop memorizing everything he does.. Btw anybody who calls somebody out for "not having a life" is pretty lame.:wall::cuss:
 
TrynaGroSumShyt

TrynaGroSumShyt

Well-Known Member
skiskate said:
hahaha did you really just tell him to stop posting unless he posts pics? Why are you on his balls so damn much. If he doesnt have a digital camera then pictures arent going up I guess..... Big whoop. If you think hes lieing then get the fuck out of his threads and stop memorizing everything he does.. Btw anybody who calls somebody out for "not having a life" is pretty lame.:wall::cuss:
Click to expand...
yes i did tell him that... but i didnt mean it.. i meant, stop making post about shit that u cant prove.. why make a thread about some shit. he says he has a digi cam, so why not up pics, why waste bandwith with bullshit post. i dont bother ppl here on riu, but it was just starting to be too much. he does the same thing everytime. makes a thread claiming some fake shit, and then when someone ask him to post up. he stops posting in them. i only make claims saying he doesnt have a life because, well who in the hell makes a post lying about having a to headed hamster on a cannabis related board. he may very well have a life but if he has to lie in threads about dumb shit
to get props or rep it still shows he has no life or maybe no friends when he has to come on here for an ego boost.
i dont know him from a can of paint, so like i said. im not attackin, im pointing out the obvious
Woomeister said:
Im getting a little concerned about old '2 heads' he/she is starting to roll around a lot now, almost like its suffering from bad dreams....

Sorry Idle, I live in the middle of nowhere and its 01:39am, my nearest friend is 90 miles away. Im hardly just going to be sat here and think 'I know! I will make up a thread about a 2 headed hamster'....
Click to expand...
this is exactly what he did. either way.. im done with him

skiskate, i dont blame u for taking up for him, i've been in the save the dumbass boat before.. but look at the evidence of his pathological lying and save yourself
 
You must log in or register to reply here.
Top