Jacks 321 vs Masterblend/Calnit/Epsom salt analysis
- Thread starter Dreddd
- Start date
Check the jacks site for the most recent formulation. Last I checked, it was 3.79-2.52-0.99.
I’ve used it without the Epsom with Gorilla Glue auto but one other strain seemed to do better with it.
bobbjoedope
Member
Hi all, I've been using MB for a few grows now. Something that I can't quite grasp is the actual NPK. I assumed just add all 3 together to get a final NPK of 19.5-18-38, which seems crazy high.
After speaking to 2 MB reps on the phone recently, they both said the NPK is actually half of that because when you add in all three elements it changes the dilution or something and that it is measured by weight. So the actual npk after mixing the Epson and calcium is more like 10-9-19.
Can anyone explain this logic to me?
After speaking to 2 MB reps on the phone recently, they both said the NPK is actually half of that because when you add in all three elements it changes the dilution or something and that it is measured by weight. So the actual npk after mixing the Epson and calcium is more like 10-9-19.
Can anyone explain this logic to me?
7CardBud
Well-Known Member
You need to divide the weight of each element by the total weight of the salts used.
A ballpark mix for a 55gal barrel would be 100-100-50.
Total weight in grams for each is 19.5N-18P-38K-19Ca-5Mg-6.5S.
Divide all elements by 250 for NPK and percentages of the salt mix.
8-7-15 7.5Ca 2Mg 2.5S
A ballpark mix for a 55gal barrel would be 100-100-50.
Total weight in grams for each is 19.5N-18P-38K-19Ca-5Mg-6.5S.
Divide all elements by 250 for NPK and percentages of the salt mix.
8-7-15 7.5Ca 2Mg 2.5S
Wastei
Well-Known Member
I saw no real benefits with the new ratio. I think it only worsen the mineral ratios. I see the new ratio as a strategy to sell more products. Epsom salt is the cheapest input.
bobbjoedope
Member
ah, so I divide by the weight of the nutes. I'm having trouble with your math though. So, Let's assume I'm going off the mixing ratio of 2:1 (MB & CA : MS). (The actual mixing rations on MB's website is wack.) A lot of people do 12g MB&CAL with 6g MS.
So, at full strength, with all 3 together- master blend, epsom, calcium I would divide the NPK by 2.5 (because the epsom is half the amount of the other 2). So regardless of the amount of nutrient solution, it looks like the final NPK is 7.8-7.2-15.2. Is my math/understanding correct?
Thanks for the help!
7CardBud
Well-Known Member
Correct, everything is divided by 2.5. The NPK, Calcium, Sulfur, Boron...etc.
bobbjoedope
Member
Thank you!!!
Similar threads
