oilmkr420
Active Member
Just to share the easiest method to produce CO2 concentrate:
2 pipe wrenches
CO2 tank DOT3 1800psi hydrotested
Everclear or 200 proof moonshine
I just unscrew the CGA320 valve when the tank is dead. Place 84-112 grams of weed in a 20lbs co2 tank, add ethanol in the amount of 180 grams. Place a tiny wad of cotton in the CGA valve and place a ¼" not fitting cut flush w the CGA valve to prevent the cotton from being pumped through. The method we will use is liquid co2 being pumped in a high pressure vessel as a high pressure gas and at co2's liquid state. This isn't a passive method either, so no patents to be violating anybodies stepped on toes. What your going to do is find a fill station as exchanges wouldn't work in this instance. Get your tank pumped for $15 costing less than $25 for the extracting of a qp. Very high quality stuff is made in this way, always beating the expectations of bho fanatics. There is a double edged sword here, carbonic acid exists only in a solution as w co-solvents. Its a weak acid, but will not pass the screening part labeled Heavy Metals and will test for steel or aluminum in ppm's as part of the extract. It is this basis for recreation use and perhaps the turning point as peoples standards should suddenly change for the snobbier, high class, all of a sudden not wanting bho extracted from a PVC tube as a more conscience consumer is now closer to being created. So the answer is simple, Stainless Steel.
2 pipe wrenches
CO2 tank DOT3 1800psi hydrotested
Everclear or 200 proof moonshine
I just unscrew the CGA320 valve when the tank is dead. Place 84-112 grams of weed in a 20lbs co2 tank, add ethanol in the amount of 180 grams. Place a tiny wad of cotton in the CGA valve and place a ¼" not fitting cut flush w the CGA valve to prevent the cotton from being pumped through. The method we will use is liquid co2 being pumped in a high pressure vessel as a high pressure gas and at co2's liquid state. This isn't a passive method either, so no patents to be violating anybodies stepped on toes. What your going to do is find a fill station as exchanges wouldn't work in this instance. Get your tank pumped for $15 costing less than $25 for the extracting of a qp. Very high quality stuff is made in this way, always beating the expectations of bho fanatics. There is a double edged sword here, carbonic acid exists only in a solution as w co-solvents. Its a weak acid, but will not pass the screening part labeled Heavy Metals and will test for steel or aluminum in ppm's as part of the extract. It is this basis for recreation use and perhaps the turning point as peoples standards should suddenly change for the snobbier, high class, all of a sudden not wanting bho extracted from a PVC tube as a more conscience consumer is now closer to being created. So the answer is simple, Stainless Steel.