Led Users Unite!

HighAsElephantTits

HighAsElephantTits

Member
Sleez said:
Y did you veg for so long?
Click to expand...
It was only 10 weeks.
Most my cycles are 10/10 I like the effect that more bioactive soil has on bud formation.
It gives the inoculants I feed more time to thrive and make connections within the root zone, establishing a more regenerative cycle before I flip.
If I reuse soil (usually I start an outdoor plant with it) then veg is only 8 weeks. The colas are also noticeable fatter than if the plant was a lower equivalent, as again, there has been more time to establish a more confident root zone
 
Stickylungs

Stickylungs

Well-Known Member
Airwalker16 said:
Very nice. Looks like a MedGrower1 inspired setup to me! :P
Click to expand...
You have a link to medgrower1 set up. Havent seen it but you have me curious. I visited a good friends grow op and liked his set up so i ask if he would help me out with this new build. Like to compare to the room your talkin about. Possible he got the design from there.

Thanks
 
Airwalker16

Airwalker16

Well-Known Member
Stickylungs said:
You have a link to medgrower1 set up. Havent seen it but you have me curious. I visited a good friends grow op and liked his set up so i ask if he would help me out with this new build. Like to compare to the room your talkin about. Possible he got the design from there.

Thanks
Click to expand...
Just YouTube search him and watch his very latest video!
 
K

Kahnnabis

Member
I have a 4x8 grow tent 7 ft tall n I'm doing dwc, 4 plants, my budget is a around $700 max I was considering getting a 2 Phlizon or maybe a quantum board.
im really trying produce some quality buds here and have the plants use the extra space a bit, any ideas
 
Airwalker16

Airwalker16

Well-Known Member
Kahnnabis said:
I have a 4x8 grow tent 7 ft tall n I'm doing dwc, 4 plants, my budget is a around $700 max I was considering getting a 2 Phlizon or maybe a quantum board.
im really trying produce some quality buds here and have the plants use the extra space a bit, any ideas
Click to expand...
Boards. Philzon is inferior LED. Get your lights on Alibaba if you only have 700 for a whole 4x8.


This product is no longer available.

This product is no longer available.
m.alibaba.com
 
K

Kahnnabis

Member
Airwalker16 said:
Boards. Philzon is inferior LED. Get your lights on Alibaba if you only have 700 for a whole 4x8.


This product is no longer available.

This product is no longer available.
m.alibaba.com
Click to expand...
I returned my aglex "2000w" UV IR "full spectrum" two days ago because I wasn't happy with what I thought the performance would be like so I'm thinking I'll be ordering two of these sf4000 bad boys, they should suffice?
 
Airwalker16

Airwalker16

Well-Known Member
Kahnnabis said:
I returned my aglex "2000w" UV IR "full spectrum" two days ago because I wasn't happy with what I thought the performance would be like so I'm thinking I'll be ordering two of these sf4000 bad boys, they should suffice?
Click to expand...
Sure. If you can swing it, I'd advise getting instead 4x SF2000's for ease of hanging and the ability to have varying hanging heights. Plus you can space them out more evenly and get much better coverage.
They're not as big so shipping will likely be less too.


[/URL]
 
K

Kahnnabis

Member
Airwalker16 said:
Sure. If you can swing it, I'd advise getting instead 4x SF2000's for ease of hanging and the ability to have varying hanging heights. Plus you can space them out more evenly and get much better coverage.
They're not as big so shipping will likely be less too.


[/URL]
Click to expand...
Which driver should I get? XLG or ELG? I did a little research on both, and it sounds like the XLG is better but it also cost less out of the two. Can you tell me about this?
 
Airwalker16

Airwalker16

Well-Known Member
Kahnnabis said:
Thanks you're the best, ordering them today comes in at 694.98 before shipping so it's in my price range which is awesome
Click to expand...
So are you saying that Archibald asked you in your talks with them which driver you wanted with your fixtures? It may be a bit of a hassle for you, but you might find yourself being super glad in the future if there's a way to order everything BUT the drivers with your order. Then you can order your 4 XLG's from somebody who's local in your country. If they ever crap out on you, which they can and do, you can warranty a lot easier through them rather than dealing with Alibaba vendors. It can be a huge hassle, or even a nightmare, to even do it. If they even reply. Plus shipping drivers back to China defeats the whole point of warrantying one.
 
K

Kahnnabis

Member
Airwalker16 said:
So are you saying that Archibald asked you in your talks with them which driver you wanted with your fixtures? It may be a bit of a hassle for you, but you might find yourself being super glad in the future if there's a way to order everything BUT the drivers with your order. Then you can order your 4 XLG's from somebody who's local in your country. If they ever crap out on you, which they can and do, you can warranty a lot easier through them rather than dealing with Alibaba vendors. It can be a huge hassle, or even a nightmare, to even do it. If they even reply. Plus shipping drivers back to China defeats the whole point of warrantying one.
Click to expand...
Yes they gave me an option between the two and they also asked if I wanted a 110v or 220v plug. I Inquired about the panels without the driver and they would do it for 108.5 USD per set vs 123.5 USD per set with the driver. I'm thinking it would be a better idea to just order them without the driver too but since I'm a little bit of a rush at this point ill just order with the driver. They said they will send a replacement driver if they go out on me
 
You must log in or register to reply here.
Top